Team ORCA USA Discussion Thread
#721
Good motor, if you don't already know if your going to go and use the timing past the mark or any at all you absolutely must have the aluminium endbell in the hot conditions. I prefer the RX3 now only based on it is nicer to drive than TX but both are fast just different conditions change what i use
#722
#725
Hey Guys,
i'm about to change my electronis to ORCA VX3 and RX3. Do you know about any issues with the stuff, even on the long run? Was told not to buy the ORCA stuff, because of some serious problems with durability!?
Any input would be apreciated. Thanks in advance!!
Regards Sebbo
i'm about to change my electronis to ORCA VX3 and RX3. Do you know about any issues with the stuff, even on the long run? Was told not to buy the ORCA stuff, because of some serious problems with durability!?
Any input would be apreciated. Thanks in advance!!
Regards Sebbo
#726
The only downside appears to be that ORCA doesn't deliver much quantity to Germany - and at least for ESCs I'd like to have my dealer in country (just in case anything does happen with it). On motors, I'm a little more relaxed and bought some from Hong Kong as well.
#727
Thanks Dirk for your reply!
There's a dealer in the UK who got the Esc and motor in stock. Do you think, this might be a problem, if there are any issues with Esc or motor?
There's a dealer in the UK who got the Esc and motor in stock. Do you think, this might be a problem, if there are any issues with Esc or motor?
#728
I don't know. I prefer to buy the more complex / more expensive things (like the VX3 ESC) here in Germany, if possible. But I guess the UK (or pretty much any European source) is ok - after all it's not that far away.
#729
running a b5m lite on a small indoor carpet track here and there and using a 17.5 orca motor. What is a good starting gearing for this. Id say with all the twist and turns and jumps the longest straight is 25' all other chutes are shorter. Im at 69 30 right now but thinking of 72 30 maybe. Any thoughts. Timing cranked to last mark on can running blinky
#730
Hi,
When is the relase of the 1/8 ESC? Some Details and Spec would be very nice.
When is the relase of the 1/8 ESC? Some Details and Spec would be very nice.
#731
Tech Apprentice
orca vx3 brakes
hello i have the orca vx3 and a trinity d4 13.5t in X-ray t4 and the brakes are weak. initial brake are on max (40 i think) and brake freq on 1k still not even close to locking the tires,i dont won't to lock the tires but when everything is on max brake force it should brake very strongly..
but its not half as strong as on tekin rsx with 70%brakeforce... any tips or info please?
but its not half as strong as on tekin rsx with 70%brakeforce... any tips or info please?
#732
in blinky or stock classes I usually run 0% initial brake with 2K or 4K and the brake feeling is super strong
#733
Tech Apprentice
orca vx3
that is strange you have the weakest settings on the brakes and they are great and i have everything on max brake and they are weak..what motor do you use?
is there a new software or something that i have missed?
is there a new software or something that i have missed?
#734
Does anyone knows from what country is ORCA company made?
#735
Taiwan, I believe.