phatboislim

iTrader: (26)

random, but you were on a forum called importatlanta a while back?

jlfx car audio

iTrader: (37)

Shipments should be coming in more often as I was told this past weekend . John forecasted to e ahead of demand by end of this week ... So I wouldn't think it would be a issue getting motors within 2 weeks from order submission. Theirs rally no comparable option atm... Every motor out is atleast .2 off pace on a larger track

b20btec

iTrader: (11)

Nope never heard of it, but i've been using this username since 1996 on various forums, even still have this as an aol address lol.

b20btec

iTrader: (11)

Thanks that'll help, about to place my order.

phatboislim

iTrader: (26)

lol ok, there used to be a guy w/ a similar if not exact SN on that forum.

gmanhunt

iTrader: (35)

Looking for some info on 17.5 and 13.5

timing and FDR for the 17.5 the 1 (last year model) going in a 2 wheel drive buggy

Timing and FDR for a 13.5 the 1 (last years model) going in a 4 wheel buggy

It is blinky racing on a small indoor carpet track ( longest strait is 50 to 70 ft)

Thanks Guys

sg1

iTrader: (79)

For 17.5 we ran a 3 line in buggy with 45* on the can.

For 13.5 we ran a 4 line in 4wd buggy with 45* on the can also.

For that small of a track I don't have a FDR, most tracks guys are running on are twice the size. I would drop pinions way down and gradually work my way up. You should see temps 130 to 140 max. with a fan on the motors.

sg1

iTrader: (79)

Back orders will be shipping Monday, going through stuff now

gmanhunt

iTrader: (35)

Thanks Wayne


What track are they running on? I would like to pull it up on the net to see the size diffrence.

sg1

iTrader: (79)

All the feedback I have is from running at the outdoor turf track at Madness.

There's a few guys running on smaller high bite clay indoor tracks, I could check with them to get a close FDR

b20btec

iTrader: (11)

I ordered a motor yesterday for 17.5 Touring, didn't really specify track size...does it matter?

sg1

iTrader: (79)

The standard timing is 44 to 46* on the motolyser.

Guys have gone up to 48 on very small track and went to a 4.3ish FDR
On larger tracks a 4.0ish FDR and back to the standard timing.

What size track will you be running on?
How much traction?

b20btec

iTrader: (11)

It will vary, our series starts on small carpet, med-large outdoor. I would say overall average traction would be medium.

sg1

iTrader: (79)

With the traction lower and small to medium sized tracks slightly higher timing would be better and a higher FDR.

b20btec

iTrader: (11)

Good info, I'll keep this in mind!