BMI Racing Discussions
#7771
Originally Posted by protc3
matt,
the titanium is a very slight bit more flexible than the black.it is so slight that it barely shows up on my gage.i will be making the motor mount with a built in bearing sleeve that will eliminate the seperation in that area.i will also be making the center supports for the car to lock it solid for real extreme high bite conditions..
paul,
glad you got it buddy.let me know if you have any questions.
and i would like to remind everyone.all aftermarket parts for any car i make kits for will be a direct bolt on to mt existing kits
the titanium is a very slight bit more flexible than the black.it is so slight that it barely shows up on my gage.i will be making the motor mount with a built in bearing sleeve that will eliminate the seperation in that area.i will also be making the center supports for the car to lock it solid for real extreme high bite conditions..
paul,
glad you got it buddy.let me know if you have any questions.
and i would like to remind everyone.all aftermarket parts for any car i make kits for will be a direct bolt on to mt existing kits
if its gonna be a while, i may have to stick the graphite chassis back on the TC4 until they are available (i'd rather not go through around 3 spurs a meeting )
anyway, i bought a new toy at the weekend...FK05 ...whats the stiffness of the BMI like compared to standard?
Whats the FK05 BMI kit retail at?
#7772
Jason, I hope you will make and sell...
CF shock towers, motor mount and a new upper deck as up grades. I'm still keeping my fingers crossed for a new upper deck, one that's lower and has keyed aluminum camber links.
#7774
Tech Regular
JASON,
man this chasis is sweet, i was so xcited leaving there yesterday i think i forgot to thank you, this is truelly a piece of work, ill see on friday how it works on the track, i set it up with a oneway in front and a spool in the rear, should be intresting!! theres alot of guys running a tc3 on the dirt oval up here, maybe you'll get some more orders for tc3 kits soon!!
mike
man this chasis is sweet, i was so xcited leaving there yesterday i think i forgot to thank you, this is truelly a piece of work, ill see on friday how it works on the track, i set it up with a oneway in front and a spool in the rear, should be intresting!! theres alot of guys running a tc3 on the dirt oval up here, maybe you'll get some more orders for tc3 kits soon!!
mike
#7775
Originally Posted by fatbear
Bring on the new motor mount. I to have has some problems with stripped spur gears but certainly not to the degree you descibe Raving-Monkey.
the chassis should be reeeealy good with the new motor mount, and a centre stiffener (chassis flexed to much for my liking)..but i got so annoyed with it at the weekend (with the stripped spurs, don't think i hate you Jason ) i went and bought an FK05 (i had my eye on a new belt drive for aaaaaages though)
#7777
Jason,
I'm gonna need 4 1/12 conversions soon!!! Carpet season is starting off with a new club and a nice racing facility here!! How soon??
Love,
Wayne
I'm gonna need 4 1/12 conversions soon!!! Carpet season is starting off with a new club and a nice racing facility here!! How soon??
Love,
Wayne
#7779
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
I three weeks of racing on mine I stripped one gear but it wasn't because of chassis flex but a cinder got into my spur and messed it up some. I still got another week on it before I had to change it.
#7781
I would like to see a 3mm TC4 chassis rather than..
stand offs, but that's just me. I hope the TC4 stuff will be here before the end of Sept.
#7783
Originally Posted by RCknight
stand offs, but that's just me. I hope the TC4 stuff will be here before the end of Sept.
a 3mm chassis without standoffs might be as stiff as 2.5mm with standoffs but having standoffs allows you to remove them and make the chassis flex more, for tarmac or what ever, put them back in for carpet.
#7784
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
When I had my TC3 with the BMI conversion I had a 2mm top and bottom plate and thats what I ran on asphalt. When I did venture onto carpet I ran a 3mm toplate and the standard 2mm bottom plate.
#7785
Tech Regular
Does anyone know where i can get 2 BMI front bumper braces in black for a BMI TC3??