BMI Racing Discussions
#7084
I wouldn't recess the bulkheads on a 3mm chassis. Unless you could still hang a 120 tooth spur on it. The '04 was great with a 120+ tooth spur and this car gets better as you raise the tooth count.
It's nice to see an adjustable motor mount also. The largest pinion that I can squeeze in there with my 120 is a 33.
Nice job Jason. It's the little things that you do that make an already awesome car better that makes people flock to your kits.
Good Job and I can't wait until I get my hands on one.
Talk to ya later,
Tim
It's nice to see an adjustable motor mount also. The largest pinion that I can squeeze in there with my 120 is a 33.
Nice job Jason. It's the little things that you do that make an already awesome car better that makes people flock to your kits.
Good Job and I can't wait until I get my hands on one.
Talk to ya later,
Tim
#7086
guys i have a BMI tc3 i have tried many setups including the ones from the d2 and a standard tc3. My car slides all over the place it has gotton better with trial error but honestly im shooting in the dark does anyone have a good setup for a carpet trick that is all inside. i neeed high trackion. thanks
Mike
Mike
#7087
What kind of carpet are you racing on? What tires are you using?
Unless your setup is WAY off you shouldn't be sliding very easily on foam tires unless your running some weird type of slicker carpet with less traction or your running nitro sedan tires. Post your setup here and I'm sure you'll get some suggestions.
Unless your setup is WAY off you shouldn't be sliding very easily on foam tires unless your running some weird type of slicker carpet with less traction or your running nitro sedan tires. Post your setup here and I'm sure you'll get some suggestions.
#7088
ozite. I use jaco dbl pink orange front and double ping rear
my car setup that worked the best was
purple/copper 60/40 oil piston #2 around
front shocktower i have the rear on front and using it on the outer most hole and on the arm the inner hole
for the rear shock tower im on the middle and the outer on the arm
1 degree camber front 3 degree rear
.3 bump steer
running the batteries in the rear postion for less rear sliding
camberlink low and inside on front
camberling high and inside on rear
bocks im running r+2+2
plase help!!
thanks
i runn 19t geared 38/100
Mike
my car setup that worked the best was
purple/copper 60/40 oil piston #2 around
front shocktower i have the rear on front and using it on the outer most hole and on the arm the inner hole
for the rear shock tower im on the middle and the outer on the arm
1 degree camber front 3 degree rear
.3 bump steer
running the batteries in the rear postion for less rear sliding
camberlink low and inside on front
camberling high and inside on rear
bocks im running r+2+2
plase help!!
thanks
i runn 19t geared 38/100
Mike
#7089
Jason - you have a PM
#7090
Originally posted by Hp1RaCeR
ozite. I use jaco dbl pink orange front and double ping rear
my car setup that worked the best was
purple/copper 60/40 oil piston #2 around
front shocktower i have the rear on front and using it on the outer most hole and on the arm the inner hole
for the rear shock tower im on the middle and the outer on the arm
1 degree camber front 3 degree rear
.3 bump steer
running the batteries in the rear postion for less rear sliding
camberlink low and inside on front
camberling high and inside on rear
bocks im running r+2+2
plase help!!
thanks
i runn 19t geared 38/100
Mike
ozite. I use jaco dbl pink orange front and double ping rear
my car setup that worked the best was
purple/copper 60/40 oil piston #2 around
front shocktower i have the rear on front and using it on the outer most hole and on the arm the inner hole
for the rear shock tower im on the middle and the outer on the arm
1 degree camber front 3 degree rear
.3 bump steer
running the batteries in the rear postion for less rear sliding
camberlink low and inside on front
camberling high and inside on rear
bocks im running r+2+2
plase help!!
thanks
i runn 19t geared 38/100
Mike
Good luck,
Tim
#7091
Originally posted by Hp1RaCeR
ozite. I use jaco dbl pink orange front and double ping rear
my car setup that worked the best was
purple/copper 60/40 oil piston #2 around
front shocktower i have the rear on front and using it on the outer most hole and on the arm the inner hole
for the rear shock tower im on the middle and the outer on the arm
1 degree camber front 3 degree rear
.3 bump steer
running the batteries in the rear postion for less rear sliding
camberlink low and inside on front
camberling high and inside on rear
bocks im running r+2+2
plase help!!
thanks
i runn 19t geared 38/100
Mike
ozite. I use jaco dbl pink orange front and double ping rear
my car setup that worked the best was
purple/copper 60/40 oil piston #2 around
front shocktower i have the rear on front and using it on the outer most hole and on the arm the inner hole
for the rear shock tower im on the middle and the outer on the arm
1 degree camber front 3 degree rear
.3 bump steer
running the batteries in the rear postion for less rear sliding
camberlink low and inside on front
camberling high and inside on rear
bocks im running r+2+2
plase help!!
thanks
i runn 19t geared 38/100
Mike
#7092
paragon and on teh front i go 1/2 compound
#7093
Tech Master
iTrader: (14)
Brian:
Hi,
it's a 2003 CRG Road Rebel. only 48 laps on it. it has the floating brembo rear disk, 50mm axle, ohintheal motor mount(third bearing), is set up for front brakes, we never bought them as Mini just ran supercan. nice kart also other things related to karting. for sale.
e mail me for a complete list.
Thanks
Hi,
it's a 2003 CRG Road Rebel. only 48 laps on it. it has the floating brembo rear disk, 50mm axle, ohintheal motor mount(third bearing), is set up for front brakes, we never bought them as Mini just ran supercan. nice kart also other things related to karting. for sale.
e mail me for a complete list.
Thanks
#7094
Tech Master
iTrader: (16)
Tim I sent you an email about your kart stuff. If it didn't get through send me a list of the stuff you are selling. [email protected] Thanks.
Chad
Chad
#7095
tim i tried that setup a while back i had to go down to red springs because of sliding in the rear it handled bette ri was wondering if anyone had something with more tracktion