erock87

thanks i will give that a try

RCsilly

erock , I drove Tims car saturday , with dbl pink /dbl pink orange on it , on a med bite track . I must say it was a very easy setup to drive fast and consistant . Definatly try it !

Bob

Tim Stamper

Erock87,

And, just to let you know, I also ran it with purple/plaid, but the traction wasn't up so I ended up going to dbl pink/ Dbl pink orange.

I also forgot to add that it has a kit front swaybar on it. Don't know the size. I want to try a thinner one though.

Tim

caleracer45

Has anyone had a chance to run the TC4 BMI chassis yet? Mine was suposed to be sent out Friday. I was wondering if anyone has any set-up suggustions, or if I need to make sure that I have anything else. I ordered a new TC4 graf. kit.

Tim Stamper

I haven't personally. I talked to TimXLB and his son Jason about it and they both told me that it definately made a big improvement over the stock car. Good luck. I can't wait to try mine either.

When it comes in, i'll post a general guideline on what I tried on the car. Ray Huang might be able to help out on some setup tips.

Tim

protc3

iTrader: (13)

hey guys,
check out CSI Miami tonight.they borrowed my dads airboat for the show and it is airing tonight at 9:30.it is the white and aqua boat.they filmed it in the everglades.this is gonna be pretty cool to see look for the bad guy,thats his boat.

Tim Stamper

That's cool. I'm taping it in the other room. I watched 24 and then medium and then watch csi afterwards. It's a long night.

Tim

Tim Stamper

Awww, it didn't blow up or anything. They treated both of them with care.

Tim

RCknight

iTrader: (5)

require any mods to the chassis or antenna?

John Fontaine

iTrader: (2)

LOL - There should of been a stunt boat that blew up

TimPotter

iTrader: (15)

Jay... I didnt see a bad ass Carbon Fiber hull, or a tricked out aluminum motor mount.. ? You sure thats your dads boat ? :>

TimXLB

iTrader: (14)

^

morpwr

hey guys,
been away for a while.as i really dont have time to search through all of the posts does anyhave a good starting setup for a tight carpet track with the complete bmi kit?almost forgot ,medium bite track.


thanks again jason,i cant wait to get the new chassis tomorrow!!!

StewartFan20

iTrader: (4)

Has anyone out there with the Pro4 BMI chassied done the upper deck mod?

1fastdude

iTrader: (16)

If you mean drilling out the 4 holes. I have done this modification.