this is our base setup for carpet /foams.
Oil: 60wt assoc
Caster blocks: 4* assoc/losi steeing knuckles
front block: F-0
shock mounting: lower outer hole on arm, middle hole on a rear shock tower mounted up front. (I cut off the outer most hole).
camber link: lower inner on shock tower.
Sway bar: either a .078 or a .062 up front (depending on bite).
Tires: Jaco double Pink/Orange or Purple/Orange.
Springs: Purple or copper (depending on bite)
Oil: 50wt Assoc
Rear toe in: either the "R" block with the R+2+0 or the "F" block with the R+3+0 block. (I shim up the "F" block with 2 motor washers per side).
Rear Hubs: Losi 0* hubs.
Camber link: upper inner hole on hte shock tower and the inner hole on the hub carrier.
Sway Bar: none
Tires: Jaco double pinks or purples.
Camber: 1.5* all around. (less up front if the tires are coning)
Motor: either a Monster stock or a MVP
Tire size: 2.360 (new Jaco rims) 2.3 (old rims)
Elecronics: GT7 speedo, (#4setting) XXTra Rx, JR 8714 servo, and a personal transponder mounted on the servo.
Body: Losi Alfa. slammed or a Startus (old one).
hope this helps.
the only change we made was to go to 70wt Assoc up front for Cleveland and we ran a 2.0 Stratus.
we went back to the Alfa this weekend
and Jaco dpuble pinks and double pink/orange for tires.
look back around pages 13 -20 for some other setups for you to try.
Nice looking Quad.................. now you have something to outrun those little storms you get