BMI Racing Discussions
#5118
Very nice! Great work as always Jason!
PS got my stuff! Thanks!
PS got my stuff! Thanks!
#5119
Jason..
Your floor tile looks great!!
Your floor tile looks great!!
#5120
Tech Champion
iTrader: (9)
Originally posted by protc3
hey guys,here is some sneak peaks at the new B-Mi-2 prototype i have been working on.first thing i did was put her on a diet and made the chassis a full .625 more narrow than stock.look at how thin but yet rigid as hell.
it is made of 2.5mm c/f upper and lower
hey guys,here is some sneak peaks at the new B-Mi-2 prototype i have been working on.first thing i did was put her on a diet and made the chassis a full .625 more narrow than stock.look at how thin but yet rigid as hell.
it is made of 2.5mm c/f upper and lower
#5123
Jason can we get a pic of the Mi2 with the top off and a pack in it?
#5124
B-Mi2
Nice work,
Comments,
Personally I would not put the slotted hole behind the motor area; they cut the fibers in a stressed area. Yes they do look cool though.
You can take out some material in front of the motor with some cool designs near the outer area.
The relief on the top deck is cool, putt it on the top and we know its there, I’d put it underside and do one under the very cool B-Mi-2.
With the battery slots in the frame the chassis’ stiffness is coming from the upper deck, the new Schumacher cars have aluminum inserts for the four corner holes connecting to the aluminum bulkheads to prevent tweaking, I’d keep them.
Nice work
Comments,
Personally I would not put the slotted hole behind the motor area; they cut the fibers in a stressed area. Yes they do look cool though.
You can take out some material in front of the motor with some cool designs near the outer area.
The relief on the top deck is cool, putt it on the top and we know its there, I’d put it underside and do one under the very cool B-Mi-2.
With the battery slots in the frame the chassis’ stiffness is coming from the upper deck, the new Schumacher cars have aluminum inserts for the four corner holes connecting to the aluminum bulkheads to prevent tweaking, I’d keep them.
Nice work
#5126
Jason...get those anodizing samples in today?
If you did and get a chance to... drop a picture in here for all of us to drool over while your on vacation.
bob
If you did and get a chance to... drop a picture in here for all of us to drool over while your on vacation.
bob
#5127
Ya Jason...
Where are those parts!!!
Where are those parts!!!
#5128
Heres a pic Art sent to me of the B-Mi-2 with the pack in it to show the much much improved battery location.
#5130
Heres the other pic Art sent to me of the bottom of the B-Mi-2.