Speedzone Batteries & Motors
#1021
Ok cool I appreciate the recommendation, I didnt want to do a direct solder like I did with the pan cars. I was deciding on these or the lipo factory by trinity but since I cant fined any reviews or any info at all by them I will order from speedzone.
#1023
Tech Adept
iTrader: (28)
Amazing Batteries!!
I just wanted to say thanks again to Gavin!!! He has great products at SpeedZoneUSA. I am about to start my 3rd year racing for SpeedZone, and very happy for the opportunity to represent SpeedZone. I recently just dipped my toes into 1/12 mod for the first time. Never tried it before. I run the 7000mah 1s packs from Speedzone because the weight of those batteries puts my car right at race weight. Well long story short the first practice pack I ran, I had the timing turned up to high on my motor and the car died at 7:48 into my 8 min practice. Took the battery back to my pit and charged it. It was below the absolute safe minimum voltage of 3.0 volts. And I put 6948mah back into a 7000mah pack. But the SpeedZone packs are of such quality that the pack charged fine and is just as good as it was before my mistake. If anyone is looking for any great racing packs I would always point you to SpeedZone, I have never ran a better pack!! Thanks again Gavin.
P.S. Figured out the timing on the mod motor, So now I make the 8 min race!!
P.S. Figured out the timing on the mod motor, So now I make the 8 min race!!
#1025
Tech Adept
iTrader: (28)
Hello Guys. Just got back from the Winter Riot in North Dakota last night. Had a great weekend! I ran F1, Stock Touring, and Stock 1/12. In F1 I was using the new SpeedZone Elite V2 25.5. This motor is great! It has plenty of top end and more low end grunt than my previous Motiv motor. Qualifying didn't go as planned with a few driver errors but started 3rd on the grid. My Speedzone motors and batteries allowed me to get into first with only 30 seconds to spare to win the race. In touring my Speedzone batteries and Peerless V2 17.5 motor were on point all weekend long. Took TQ in all 4 rounds of qualifying and took the A-Main. In 1/12 my Speedzone batteries and Peerless V2 motor had more than enough power to place in the A, But I ended up going the wrong way with my car setup and couldn't carry the corner speed to be competitive in the main and finished 8th. All in all had a great weekend and am proud to be representing SpeedZone at all of my races, and look forward to representing to the the best of my abilities in the future!
#1026
Hello Guys. Just got back from the Winter Riot in North Dakota last night. Had a great weekend! I ran F1, Stock Touring, and Stock 1/12. In F1 I was using the new SpeedZone Elite V2 25.5. This motor is great! It has plenty of top end and more low end grunt than my previous Motiv motor. Qualifying didn't go as planned with a few driver errors but started 3rd on the grid. My Speedzone motors and batteries allowed me to get into first with only 30 seconds to spare to win the race. In touring my Speedzone batteries and Peerless V2 17.5 motor were on point all weekend long. Took TQ in all 4 rounds of qualifying and took the A-Main. In 1/12 my Speedzone batteries and Peerless V2 motor had more than enough power to place in the A, But I ended up going the wrong way with my car setup and couldn't carry the corner speed to be competitive in the main and finished 8th. All in all had a great weekend and am proud to be representing SpeedZone at all of my races, and look forward to representing to the the best of my abilities in the future!
#1028
Question, I have just bought my 4th Speedzone 5000mah 90c 2s lipo and I must say though I think my 50c have more power I am very pleased BUT... Why do all of my Speedzone packs randomly say "volt error" after charging? None of my other batteries do this. When I clear the message and hit charge right after it will charge for a few seconds and then says charge complete. And no I am not draining below 3.6v
#1029
Question, I have just bought my 4th Speedzone 5000mah 90c 2s lipo and I must say though I think my 50c have more power I am very pleased BUT... Why do all of my Speedzone packs randomly say "volt error" after charging? None of my other batteries do this. When I clear the message and hit charge right after it will charge for a few seconds and then says charge complete. And no I am not draining below 3.6v
Thanks!
#1033
4.5 peerless 550
Stupid question, but is this Motor a 2 or 4 pole?