Hello all-- Welcome to Slingshot Batteries thread.
Slingshot Batteries has been around since 2004 matching world class quality batteries. In just the last two years Slingshot Batteries have won 2 national titles, 5 JBRL series titles along with wins at prestigious races like the Cactus Classic, Hot Rod Hobbies Shootout and the SoCal Supercross. Slingshot batteries is dedicated to helping power your cars to the winner circle!
Thank you for the introduction Casper..... For those of you who do not know me, my name is Keith Whisler and I'm the owner of Slingshot Batteries. If you have any questions concerning Slingshot Batteries and our product line, please feel free to ask either Casper or myself and we will be happy to answer them for you. Currently our webstore is fully stocked with IB cells and the new EP cells. Take a look, we hope you like what you see...
Scott and James--Thanks for stopping by the thread....
Casper - No I haven’t figured it out yet but I haven’t looked at it yet either. I am heading out to Pegasus tomorrow and will have a pad next to me to write down any questions I have. I did hear back from Intigy yesterday and a scathing e-mail. I was told they would e-mail me the manual right away, nothing yet.
If you are going to use it just charge your batteries at 6 amps. Do not worry about the step charging. Step one set to like 10 mah 6 amps , step two set 20 mah at 6 amps and then set step 3 to 4200 mah a 6 amps. Set the temp cutoff to 48 deg C. Set the delta peak as low as it will go. You should be fine. If the batteries do not feel warm when they peak out turn up the delta peak on step at a time. As long as you have the temp probe on the pack with a 48 deg C stop temp you should be ok. Have you picked up any new EP packs yet?
If you have EP packs turn up step 3 to 4400 mah. Still charge all three steps at 6 amps.
You can put the probe under the pack so the pack sits on it or if you do not glue the pack together you can wedge it between two middle cells. You can also use tape but that seems like a pain. I have to get a better look at that probe but I have some great magnets for keeping probes on the cells. Bug me next time you see me and I can hook you up.