HPI Savage Flux with FULL MODs
12-21-2009, 04:57 AM
#1
HPI Savage Flux with FULL MODs
Selling fully hop-up Savage FLUX roller kit with ESC & MOTOR!!
Like Brand new! 5 mins of running time on glass for testing!
Below are the list of items you will get, plus all the STOCK parts (all new)
1. HPI X clear shell (Came with Original Black/RED shell as well) Not spray
2. HPI Alu Race Suspension Conversion
3. HPI Titanium drive shaft
4. HPI Titanium gear shaft
5. HPI Steering ball-bearing
6. HPI 17mm hex wheel conversion
7. Flextek full titanium flexi-arms (Cost $300USD exclude shipping!!)
8. Bad Horsie shock sock
9. Lundford Titanium suspension pins
10. Lundford Titanium turn-buckles
11. FLM Alu 4.7mm thick TVP chassis plate
12. RPM StableMaxx Revolver Black 17mm rims x 4 with pro-line tires (stock chrome rims with tires also be given)
13. Full stainless-steel screws
14. Platinium RC Carbon Fiber TVP chassis plate
15. Platinium RC Carbon Fiber skid-plate
16. Platinium RC Carbon Fiber radio plate
17. Platinium RC Carbon Fiber motor plate
18. Platinium RC Carbon Fiber bulkhead lower plate x 2
19. Platinium RC Carbon Fiber rear wing mount plate
20. Hotbodies Wing stay mount
The stock spares can bulit up another kit!!
Selling for $1199 nett.
No low baller. I'm not urgent to sell!!
If interested Please contact 82674664.
P.S. You just need a transmiter & receiver to run this Monster.
http://www.platinumrcproducts.com/products.html
Like Brand new! 5 mins of running time on glass for testing!
Below are the list of items you will get, plus all the STOCK parts (all new)
1. HPI X clear shell (Came with Original Black/RED shell as well) Not spray
2. HPI Alu Race Suspension Conversion
3. HPI Titanium drive shaft
4. HPI Titanium gear shaft
5. HPI Steering ball-bearing
6. HPI 17mm hex wheel conversion
7. Flextek full titanium flexi-arms (Cost $300USD exclude shipping!!)
8. Bad Horsie shock sock
9. Lundford Titanium suspension pins
10. Lundford Titanium turn-buckles
11. FLM Alu 4.7mm thick TVP chassis plate
12. RPM StableMaxx Revolver Black 17mm rims x 4 with pro-line tires (stock chrome rims with tires also be given)
13. Full stainless-steel screws
14. Platinium RC Carbon Fiber TVP chassis plate
15. Platinium RC Carbon Fiber skid-plate
16. Platinium RC Carbon Fiber radio plate
17. Platinium RC Carbon Fiber motor plate
18. Platinium RC Carbon Fiber bulkhead lower plate x 2
19. Platinium RC Carbon Fiber rear wing mount plate
20. Hotbodies Wing stay mount
The stock spares can bulit up another kit!!
Selling for $1199 nett.
No low baller. I'm not urgent to sell!!
If interested Please contact 82674664.
P.S. You just need a transmiter & receiver to run this Monster.
http://www.platinumrcproducts.com/products.html
Last edited by andre lim; 12-21-2009 at 05:30 AM.
12-21-2009, 08:01 AM
#2
Selling fully hop-up Savage FLUX roller kit with ESC & MOTOR!!
Like Brand new! 5 mins of running time on glass for testing!
Below are the list of items you will get, plus all the STOCK parts (all new)
1. HPI X clear shell (Came with Original Black/RED shell as well) Not spray
2. HPI Alu Race Suspension Conversion
3. HPI Titanium drive shaft
4. HPI Titanium gear shaft
5. HPI Steering ball-bearing
6. HPI 17mm hex wheel conversion
7. Flextek full titanium flexi-arms (Cost $300USD exclude shipping!!)
8. Bad Horsie shock sock
9. Lundford Titanium suspension pins
10. Lundford Titanium turn-buckles
11. FLM Alu 4.7mm thick TVP chassis plate
12. RPM StableMaxx Revolver Black 17mm rims x 4 with pro-line tires (stock chrome rims with tires also be given)
13. Full stainless-steel screws
14. Platinium RC Carbon Fiber TVP chassis plate
15. Platinium RC Carbon Fiber skid-plate
16. Platinium RC Carbon Fiber radio plate
17. Platinium RC Carbon Fiber motor plate
18. Platinium RC Carbon Fiber bulkhead lower plate x 2
19. Platinium RC Carbon Fiber rear wing mount plate
20. Hotbodies Wing stay mount
The stock spares can bulit up another kit!!
Selling for $1199 nett.
No low baller. I'm not urgent to sell!!
If interested Please contact 82674664.
P.S. You just need a transmiter & receiver to run this Monster.
http://www.platinumrcproducts.com/products.html
Like Brand new! 5 mins of running time on glass for testing!
Below are the list of items you will get, plus all the STOCK parts (all new)
1. HPI X clear shell (Came with Original Black/RED shell as well) Not spray
2. HPI Alu Race Suspension Conversion
3. HPI Titanium drive shaft
4. HPI Titanium gear shaft
5. HPI Steering ball-bearing
6. HPI 17mm hex wheel conversion
7. Flextek full titanium flexi-arms (Cost $300USD exclude shipping!!)
8. Bad Horsie shock sock
9. Lundford Titanium suspension pins
10. Lundford Titanium turn-buckles
11. FLM Alu 4.7mm thick TVP chassis plate
12. RPM StableMaxx Revolver Black 17mm rims x 4 with pro-line tires (stock chrome rims with tires also be given)
13. Full stainless-steel screws
14. Platinium RC Carbon Fiber TVP chassis plate
15. Platinium RC Carbon Fiber skid-plate
16. Platinium RC Carbon Fiber radio plate
17. Platinium RC Carbon Fiber motor plate
18. Platinium RC Carbon Fiber bulkhead lower plate x 2
19. Platinium RC Carbon Fiber rear wing mount plate
20. Hotbodies Wing stay mount
The stock spares can bulit up another kit!!
Selling for $1199 nett.
No low baller. I'm not urgent to sell!!
If interested Please contact 82674664.
P.S. You just need a transmiter & receiver to run this Monster.
http://www.platinumrcproducts.com/products.html
This is a hell of a buy! Saw it for myself yesterday and this truck ROCKS!
Titanium, Carbon Fiber, Titanium, Carbon Fiber ! ! !
Andre, you really have to post photos for this truck!
And all the spares that you are putting in this bundle!
A brand new Stock Savage Flux is also about the same price~!
12-21-2009, 10:02 AM
#3
This is a hell of a buy! Saw it for myself yesterday and this truck ROCKS!
Titanium, Carbon Fiber, Titanium, Carbon Fiber ! ! !
Andre, you really have to post photos for this truck!
And all the spares that you are putting in this bundle!
A brand new Stock Savage Flux is also about the same price~!
12-21-2009, 09:15 PM
#7
Can I know the reason why are you selling? You're not including the stock tx & rx?
12-21-2009, 10:34 PM
#10
12-21-2009, 10:40 PM
#11
12-21-2009, 10:43 PM
#12
All email reply!
12-22-2009, 04:52 AM
#13
That is a nice kit. If only it were out for sale just a bit earlier. My FXT arms are already in the mail.
Let me check with a colleague who's looking to start the hobby. I could use some spare parts, and he wants a truck heheheh.
btw how did you manage to use the 17mm conversion kit on the flux? Everything I have read online points to that being incompatible with the SHD cups for the XL and Flux.
XL
Let me check with a colleague who's looking to start the hobby. I could use some spare parts, and he wants a truck heheheh.
btw how did you manage to use the 17mm conversion kit on the flux? Everything I have read online points to that being incompatible with the SHD cups for the XL and Flux.
XL
12-22-2009, 09:28 AM
#14
That is a nice kit. If only it were out for sale just a bit earlier. My FXT arms are already in the mail.
Let me check with a colleague who's looking to start the hobby. I could use some spare parts, and he wants a truck heheheh.
btw how did you manage to use the 17mm conversion kit on the flux? Everything I have read online points to that being incompatible with the SHD cups for the XL and Flux.
XL
Let me check with a colleague who's looking to start the hobby. I could use some spare parts, and he wants a truck heheheh.
btw how did you manage to use the 17mm conversion kit on the flux? Everything I have read online points to that being incompatible with the SHD cups for the XL and Flux.
XL
12-22-2009, 09:31 AM
#15
For serious buyer!
If interested can view at Hougang area.
If interested can view at Hougang area.