Autodrift Special Edition Competition 2015 (25 April 2015)
#1
Autodrift Special Edition Competition 2015 (25 April 2015)
Dear All Drifters,
Autodrift is excited to co-organize a Special Edition RC drifting competition incorporating 3D printed parts.
Venue: Suntec Singapore Convention & Exhibition Centre
Date: 25 April 2015 (Saturday)
Time: 9.00am to 7:00pm
Entry Fees: Free Entry
* Maximum Entries: 40 participants in total for both CS and RWD categories.
This will be an opportunity to pit your drifting skills with 3D printed car parts that are designed by yourself. For this tech challenge event, all participating cars must be fitted minimally with 3D printed spoiler and rims to be eligible for participation.
For registered participants, 2 sessions of free workshops will be provided for you to learn the basics of 3D printing technology and designing your own car parts. There will be trainers to guide you through the design and printing.
As this is a special edition event, there will be no participation fee involved. Please, however, confirm that you are available to commit your time in the pre-event workshops and competition dates before registering.
3D Printing Workshop (Session 1) – Introduction to 3D Design & Printing
Venue: To be advised
Date: 11 April 2015 (Saturday) - Update
Time: 2:00pm to 6:00pm
3D Printing Workshop (Session 2) – Finalisation of 3D Design of Car Parts & Printing
Venue: To be advised
Date: 12 April 2015 (Sunday) - Update
Time: 2:00pm to 6:00pm
Eligibility - Update
1. Please ensure that you can commit to ONE of the above-mentioned dates for 3D Printing workshop.
* Strongly suggest to participate both workshop.
2. Participation in 3D Printing workshops and Drift Competition is compulsory.
3. All cars must be fitted with 3D printed spoiler and rims to be eligible to participate in this event.
Category 1: Counter Steering Class (4WD).
Category 2: Rear Wheel Drive (RWD).
* RWD – Maximum weight 1,800grams include body shell & batteries.
Rules & Regulations (Apply to CS & RWD)
1. Chassis – Open to any 1/10 EP Drift Chassis (see note).
2. Body Shell – Open to any Yokomo Drift body shell (No approved sticker is needed for this event).
3. ESC / Motor – Open to any brands.
4. Batteries – Open to any brands NiCd / MH7.2v, Life 6.6v or LiPo 7.4v.
5. Official Tires – Autodrift Pro Grip Tires.
* Maximum total weight for Rear Wheel Drive class – 1,800 grams (include body shell & batteries)
Prizes
1. Group A – Trophies for Top Qualifier & Top 8.
2. Group B – Trophies for Top 3.
3. Best Body Shells – Trophies for Top 3.
3α. Best Car/Bodyshell Design using 3D printing Technology – Cash prize of $200.00.
Workshops
All registered competitors are required to provide their own laptop or MacBook for the workshops.
* We will cater in-house laptop for use after lesson 1 at Autodrift store if you do not have a laptop or MacBook.
Registration
To register, please email the following details to: [email protected] with subject header: Special Edition RC drifting competition or visit Autodrift Pte Ltd : Blk 465 Crawford Lane #01-06 Singapore 190465.
- Full name, Chassis, Mobile number, Email address, Competition category that you are registering for.
Closing Date
10 April 2015, Friday or when maximum entries are received (First come first served and see Note below).
(Note)
1. Maximum entries for both categories in total: 40 entries.
2. Priority will be given to Yokomo, enRoute, MST, RC-Art and Outclip chassis (with sticker) if total number exceed 40 entries.
Thank you.
Last edited by yokomo-SIA; 04-07-2015 at 08:28 AM.
#2
see post #3
Last edited by yokomo-SIA; 03-27-2015 at 07:25 AM.
#3
Dear All Drifters,
Autodrift is excited to co-organize a Special Edition RC drifting competition incorporating 3D printed parts.
Venue: Suntec Singapore Convention & Exhibition Centre
Date: 25 April 2015 (Saturday)
Time: 9.00am to 7:00pm
Entry Fees: Free Entry
* Maximum Entries: 40 participants in total for both CS and RWD categories.
Please, however, confirm that you are available to commit your time in the pre-event workshops and competition dates before registering.
3D Printing Workshop (Session 1) – Introduction to 3D Design & Printing
Venue: To be advised
Date: 11 April 2015 (Saturday) - Update
Time: 2:00pm to 6:00pm
3D Printing Workshop (Session 2) – Finalisation of 3D Design of Car Parts & Printing
Venue: To be advised
Date: 12 April 2015 (Sunday) - Update
Time: 2:00pm to 6:00pm
Eligibility - Update
1. Please ensure that you can commit to ONE of the above-mentioned dates for 3D Printing workshop.
* Strongly suggest to participate both workshop.
2. Participation in 3D Printing workshops and Drift Competition is compulsory.
3. All cars must be fitted with 3D printed spoiler and rims to be eligible to participate in this event.
Category 1: Counter Steering Class (4WD).
Name / Car / Mobile / Email
01. Clifford Ong / Yokomo DPM / Mobile & Email submitted.
02. Sean Ng / Yokomo DIB / Mobile & Email submitted.
03. Darryl Tan / Yokomo DIB / Mobile & Email submitted.
04.
05.
06.
07.
08.
09.
10.
Category 2: Rear Wheel Drive (RWD).
Name / Car / Mobile / Email
01. Bernard Saw / MST FXX-D / Mobile & Email submitted.
02.
03.
04.
05.
06.
07.
08.
09.
10.
* RWD – Maximum weight 1,800grams include body shell & batteries.
Closing Date
6 April 2015, Monday or when maximum entries are received (First come first served and see Note below).
Please see Post #1 for full information.
Thank you.
Autodrift is excited to co-organize a Special Edition RC drifting competition incorporating 3D printed parts.
Venue: Suntec Singapore Convention & Exhibition Centre
Date: 25 April 2015 (Saturday)
Time: 9.00am to 7:00pm
Entry Fees: Free Entry
* Maximum Entries: 40 participants in total for both CS and RWD categories.
Please, however, confirm that you are available to commit your time in the pre-event workshops and competition dates before registering.
3D Printing Workshop (Session 1) – Introduction to 3D Design & Printing
Venue: To be advised
Date: 11 April 2015 (Saturday) - Update
Time: 2:00pm to 6:00pm
3D Printing Workshop (Session 2) – Finalisation of 3D Design of Car Parts & Printing
Venue: To be advised
Date: 12 April 2015 (Sunday) - Update
Time: 2:00pm to 6:00pm
Eligibility - Update
1. Please ensure that you can commit to ONE of the above-mentioned dates for 3D Printing workshop.
* Strongly suggest to participate both workshop.
2. Participation in 3D Printing workshops and Drift Competition is compulsory.
3. All cars must be fitted with 3D printed spoiler and rims to be eligible to participate in this event.
Category 1: Counter Steering Class (4WD).
Name / Car / Mobile / Email
01. Clifford Ong / Yokomo DPM / Mobile & Email submitted.
02. Sean Ng / Yokomo DIB / Mobile & Email submitted.
03. Darryl Tan / Yokomo DIB / Mobile & Email submitted.
04.
05.
06.
07.
08.
09.
10.
Category 2: Rear Wheel Drive (RWD).
Name / Car / Mobile / Email
01. Bernard Saw / MST FXX-D / Mobile & Email submitted.
02.
03.
04.
05.
06.
07.
08.
09.
10.
* RWD – Maximum weight 1,800grams include body shell & batteries.
Closing Date
6 April 2015, Monday or when maximum entries are received (First come first served and see Note below).
Please see Post #1 for full information.
Thank you.
Last edited by yokomo-SIA; 03-28-2015 at 07:56 AM.
#4
Dear All Drifters,
Updates on criteria for this event:-
Changes in dates for the pre-event workshops.
3D Printing Workshop (Session 1) – Introduction to 3D Design & Printing
Venue: To be advised
Date: 11 April 2015 (Saturday) - Updated
Time: 2:00pm to 6:00pm
3D Printing Workshop (Session 2) – Finalisation of 3D Design of Car Parts & Printing
Venue: To be advised
Date: 12 April 2015 (Sunday) - Updated
Time: 2:00pm to 6:00pm
Eligibility - Update
1. Please ensure that you can commit to minimum ONE of the above-mentioned dates for 3D Printing workshop.
* Strongly suggest to participate both workshop.
2. Participation in 3D Printing workshops and Drift Competition is compulsory.
3. All cars must be fitted with 3D printed spoiler and rims to be eligible to participate in this event.
Closing Date
6 April 2015, Monday or when maximum entries are received.
Thank you.
Updates on criteria for this event:-
Changes in dates for the pre-event workshops.
3D Printing Workshop (Session 1) – Introduction to 3D Design & Printing
Venue: To be advised
Date: 11 April 2015 (Saturday) - Updated
Time: 2:00pm to 6:00pm
3D Printing Workshop (Session 2) – Finalisation of 3D Design of Car Parts & Printing
Venue: To be advised
Date: 12 April 2015 (Sunday) - Updated
Time: 2:00pm to 6:00pm
Eligibility - Update
1. Please ensure that you can commit to minimum ONE of the above-mentioned dates for 3D Printing workshop.
* Strongly suggest to participate both workshop.
2. Participation in 3D Printing workshops and Drift Competition is compulsory.
3. All cars must be fitted with 3D printed spoiler and rims to be eligible to participate in this event.
Closing Date
6 April 2015, Monday or when maximum entries are received.
Thank you.
Last edited by yokomo-SIA; 03-28-2015 at 07:57 AM.
#5
Dear All Drifters,
Autodrift is excited to co-organize a Special Edition RC drifting competition incorporating 3D printed parts.
Venue: Suntec Singapore Convention & Exhibition Centre
Date: 25 April 2015 (Saturday)
Time: 9.00am to 7:00pm
Entry Fees: Free Entry
* Maximum Entries: 40 participants in total for both CS and RWD categories.
Please, however, confirm that you are available to commit your time in the pre-event workshops and competition dates before registering.
3D Printing Workshop (Session 1) – Introduction to 3D Design & Printing
Venue: To be advised
Date: 11 April 2015 (Saturday) - Update
Time: 2:00pm to 6:00pm
3D Printing Workshop (Session 2) – Finalisation of 3D Design of Car Parts & Printing
Venue: To be advised
Date: 12 April 2015 (Sunday) - Update
Time: 2:00pm to 6:00pm
Eligibility - Update
1. Please ensure that you can commit to ONE of the above-mentioned dates for 3D Printing workshop.
* Strongly suggest to participate both workshop.
2. Participation in 3D Printing workshops and Drift Competition is compulsory.
3. All cars must be fitted with 3D printed spoiler and rims to be eligible to participate in this event.
Category 1: Counter Steering Class (4WD).
Name / Car / Mobile / Email
01. Clifford Ong / Yokomo DPM / Mobile & Email submitted.
02. Sean Ng / Yokomo DIB / Mobile & Email submitted.
03. Darryl Tan / Yokomo DIB / Mobile & Email submitted.
04. Melvin Poon / OTA / Mobile & Email submitted.
05.
06.
07.
08.
09.
10.
Category 2: Rear Wheel Drive (RWD).
Name / Car / Mobile / Email
01. Bernard Saw / MST FXX-D / Mobile & Email submitted.
02. Joohniam Lew /Yokomo DIB / Mobile & Email submitted.
03.
04.
05.
06.
07.
08.
09.
10.
* RWD – Maximum weight 1,800grams include body shell & batteries.
Closing Date
6 April 2015, Monday or when maximum entries are received (First come first served and see Note below).
Please see Post #1 for full information.
Thank you.
Autodrift is excited to co-organize a Special Edition RC drifting competition incorporating 3D printed parts.
Venue: Suntec Singapore Convention & Exhibition Centre
Date: 25 April 2015 (Saturday)
Time: 9.00am to 7:00pm
Entry Fees: Free Entry
* Maximum Entries: 40 participants in total for both CS and RWD categories.
Please, however, confirm that you are available to commit your time in the pre-event workshops and competition dates before registering.
3D Printing Workshop (Session 1) – Introduction to 3D Design & Printing
Venue: To be advised
Date: 11 April 2015 (Saturday) - Update
Time: 2:00pm to 6:00pm
3D Printing Workshop (Session 2) – Finalisation of 3D Design of Car Parts & Printing
Venue: To be advised
Date: 12 April 2015 (Sunday) - Update
Time: 2:00pm to 6:00pm
Eligibility - Update
1. Please ensure that you can commit to ONE of the above-mentioned dates for 3D Printing workshop.
* Strongly suggest to participate both workshop.
2. Participation in 3D Printing workshops and Drift Competition is compulsory.
3. All cars must be fitted with 3D printed spoiler and rims to be eligible to participate in this event.
Category 1: Counter Steering Class (4WD).
Name / Car / Mobile / Email
01. Clifford Ong / Yokomo DPM / Mobile & Email submitted.
02. Sean Ng / Yokomo DIB / Mobile & Email submitted.
03. Darryl Tan / Yokomo DIB / Mobile & Email submitted.
04. Melvin Poon / OTA / Mobile & Email submitted.
05.
06.
07.
08.
09.
10.
Category 2: Rear Wheel Drive (RWD).
Name / Car / Mobile / Email
01. Bernard Saw / MST FXX-D / Mobile & Email submitted.
02. Joohniam Lew /Yokomo DIB / Mobile & Email submitted.
03.
04.
05.
06.
07.
08.
09.
10.
* RWD – Maximum weight 1,800grams include body shell & batteries.
Closing Date
6 April 2015, Monday or when maximum entries are received (First come first served and see Note below).
Please see Post #1 for full information.
Thank you.
#6
Dear All Drifters,
Autodrift is excited to co-organize a Special Edition RC drifting competition incorporating 3D printed parts.
Venue: Suntec Singapore Convention & Exhibition Centre
Date: 25 April 2015 (Saturday)
Time: 9.00am to 7:00pm
Entry Fees: Free Entry
* Maximum Entries: 40 participants in total for both CS and RWD categories.
Please, however, confirm that you are available to commit your time in the pre-event workshops and competition dates before registering.
3D Printing Workshop (Session 1) – Introduction to 3D Design & Printing
Venue: To be advised
Date: 11 April 2015 (Saturday) - Update
Time: 2:00pm to 6:00pm
3D Printing Workshop (Session 2) – Finalisation of 3D Design of Car Parts & Printing
Venue: To be advised
Date: 12 April 2015 (Sunday) - Update
Time: 2:00pm to 6:00pm
Eligibility - Update
1. Please ensure that you can commit to ONE of the above-mentioned dates for 3D Printing workshop.
* Strongly suggest to participate both workshop.
2. Participation in 3D Printing workshops and Drift Competition is compulsory.
3. All cars must be fitted with 3D printed spoiler and rims to be eligible to participate in this event.
Category 1: Counter Steering Class (4WD).
Name / Car / Mobile / Email
01. Clifford Ong / Yokomo DPM / Mobile & Email submitted.
02. Sean Ng / Yokomo DIB / Mobile & Email submitted.
03. Darryl Tan / Yokomo DIB / Mobile & Email submitted.
04. Melvin Poon / OTA / Mobile & Email submitted.
05. Doran Yew / Kazama / Mobile & Email submitted.
06.
07.
08.
09.
10.
Category 2: Rear Wheel Drive (RWD).
Name / Car / Mobile / Email
01. Bernard Saw / MST FXX-D / Mobile & Email submitted.
02. Joohniam Lew /Yokomo DIB / Mobile & Email submitted.
03.
04.
05.
06.
07.
08.
09.
10.
* RWD – Maximum weight 1,800grams include body shell & batteries.
Closing Date
6 April 2015, Monday or when maximum entries are received (First come first served and see Note below).
Please see Post #1 for full information.
Thank you.
Autodrift is excited to co-organize a Special Edition RC drifting competition incorporating 3D printed parts.
Venue: Suntec Singapore Convention & Exhibition Centre
Date: 25 April 2015 (Saturday)
Time: 9.00am to 7:00pm
Entry Fees: Free Entry
* Maximum Entries: 40 participants in total for both CS and RWD categories.
Please, however, confirm that you are available to commit your time in the pre-event workshops and competition dates before registering.
3D Printing Workshop (Session 1) – Introduction to 3D Design & Printing
Venue: To be advised
Date: 11 April 2015 (Saturday) - Update
Time: 2:00pm to 6:00pm
3D Printing Workshop (Session 2) – Finalisation of 3D Design of Car Parts & Printing
Venue: To be advised
Date: 12 April 2015 (Sunday) - Update
Time: 2:00pm to 6:00pm
Eligibility - Update
1. Please ensure that you can commit to ONE of the above-mentioned dates for 3D Printing workshop.
* Strongly suggest to participate both workshop.
2. Participation in 3D Printing workshops and Drift Competition is compulsory.
3. All cars must be fitted with 3D printed spoiler and rims to be eligible to participate in this event.
Category 1: Counter Steering Class (4WD).
Name / Car / Mobile / Email
01. Clifford Ong / Yokomo DPM / Mobile & Email submitted.
02. Sean Ng / Yokomo DIB / Mobile & Email submitted.
03. Darryl Tan / Yokomo DIB / Mobile & Email submitted.
04. Melvin Poon / OTA / Mobile & Email submitted.
05. Doran Yew / Kazama / Mobile & Email submitted.
06.
07.
08.
09.
10.
Category 2: Rear Wheel Drive (RWD).
Name / Car / Mobile / Email
01. Bernard Saw / MST FXX-D / Mobile & Email submitted.
02. Joohniam Lew /Yokomo DIB / Mobile & Email submitted.
03.
04.
05.
06.
07.
08.
09.
10.
* RWD – Maximum weight 1,800grams include body shell & batteries.
Closing Date
6 April 2015, Monday or when maximum entries are received (First come first served and see Note below).
Please see Post #1 for full information.
Thank you.
#7
Dear All Drifters,
Autodrift is excited to co-organize a Special Edition RC drifting competition incorporating 3D printed parts.
Venue: Suntec Singapore Convention & Exhibition Centre
Date: 25 April 2015 (Saturday)
Time: 9.00am to 7:00pm
Entry Fees: Free Entry
* Maximum Entries: 40 participants in total for both CS and RWD categories.
Please, however, confirm that you are available to commit your time in the pre-event workshops and competition dates before registering.
3D Printing Workshop (Session 1) – Introduction to 3D Design & Printing
Venue: To be advised
Date: 11 April 2015 (Saturday) - Update
Time: 2:00pm to 6:00pm
3D Printing Workshop (Session 2) – Finalisation of 3D Design of Car Parts & Printing
Venue: To be advised
Date: 12 April 2015 (Sunday) - Update
Time: 2:00pm to 6:00pm
Eligibility - Update
1. Please ensure that you can commit to ONE of the above-mentioned dates for 3D Printing workshop.
* Strongly suggest to participate both workshop.
2. Participation in 3D Printing workshops and Drift Competition is compulsory.
3. All cars must be fitted with 3D printed spoiler and rims to be eligible to participate in this event.
Category 1: Counter Steering Class (4WD).
Name / Car / Mobile / Email
01. Clifford Ong / Yokomo DPM / Mobile & Email submitted.
02. Sean Ng / Yokomo DIB / Mobile & Email submitted.
03. Darryl Tan / Yokomo DIB / Mobile & Email submitted.
04. Melvin Poon / OTA / Mobile & Email submitted.
05. Doran Yew / Kazama / Mobile & Email submitted.
06. Michael / Yokomo DIB / Mobile & Email submitted.
07. Darryl Tan / Yokomo DIB / Mobile & Email submitted.
08. Willy Ho / Yokomo DIB / Mobile & Email submitted.
09.
10.
Category 2: Rear Wheel Drive (RWD).
Name / Car / Mobile / Email
01. Bernard Saw / MST FXX-D / Mobile & Email submitted.
02. Joohniam Lew /Yokomo DIB / Mobile & Email submitted.
03. Chua Eng Soon / Yokomo MR4TC / Mobile & Email submitted.
04.
05.
06.
07.
08.
09.
10.
* RWD – Maximum weight 1,800grams include body shell & batteries.
Closing Date
6 April 2015, Monday or when maximum entries are received (First come first served and see Note below).
Please see Post #1 for full information.
Thank you.
Autodrift is excited to co-organize a Special Edition RC drifting competition incorporating 3D printed parts.
Venue: Suntec Singapore Convention & Exhibition Centre
Date: 25 April 2015 (Saturday)
Time: 9.00am to 7:00pm
Entry Fees: Free Entry
* Maximum Entries: 40 participants in total for both CS and RWD categories.
Please, however, confirm that you are available to commit your time in the pre-event workshops and competition dates before registering.
3D Printing Workshop (Session 1) – Introduction to 3D Design & Printing
Venue: To be advised
Date: 11 April 2015 (Saturday) - Update
Time: 2:00pm to 6:00pm
3D Printing Workshop (Session 2) – Finalisation of 3D Design of Car Parts & Printing
Venue: To be advised
Date: 12 April 2015 (Sunday) - Update
Time: 2:00pm to 6:00pm
Eligibility - Update
1. Please ensure that you can commit to ONE of the above-mentioned dates for 3D Printing workshop.
* Strongly suggest to participate both workshop.
2. Participation in 3D Printing workshops and Drift Competition is compulsory.
3. All cars must be fitted with 3D printed spoiler and rims to be eligible to participate in this event.
Category 1: Counter Steering Class (4WD).
Name / Car / Mobile / Email
01. Clifford Ong / Yokomo DPM / Mobile & Email submitted.
02. Sean Ng / Yokomo DIB / Mobile & Email submitted.
03. Darryl Tan / Yokomo DIB / Mobile & Email submitted.
04. Melvin Poon / OTA / Mobile & Email submitted.
05. Doran Yew / Kazama / Mobile & Email submitted.
06. Michael / Yokomo DIB / Mobile & Email submitted.
07. Darryl Tan / Yokomo DIB / Mobile & Email submitted.
08. Willy Ho / Yokomo DIB / Mobile & Email submitted.
09.
10.
Category 2: Rear Wheel Drive (RWD).
Name / Car / Mobile / Email
01. Bernard Saw / MST FXX-D / Mobile & Email submitted.
02. Joohniam Lew /Yokomo DIB / Mobile & Email submitted.
03. Chua Eng Soon / Yokomo MR4TC / Mobile & Email submitted.
04.
05.
06.
07.
08.
09.
10.
* RWD – Maximum weight 1,800grams include body shell & batteries.
Closing Date
6 April 2015, Monday or when maximum entries are received (First come first served and see Note below).
Please see Post #1 for full information.
Thank you.
Last edited by yokomo-SIA; 04-04-2015 at 10:55 AM.
#8
Dear All Drifters,
Autodrift is excited to co-organize a Special Edition RC drifting competition incorporating 3D printed parts.
Venue: Suntec Singapore Convention & Exhibition Centre
Date: 25 April 2015 (Saturday)
Time: 9.00am to 7:00pm
Entry Fees: Free Entry
* Maximum Entries: 40 participants in total for both CS and RWD categories.
Please, however, confirm that you are available to commit your time in the pre-event workshops and competition dates before registering.
3D Printing Workshop (Session 1) – Introduction to 3D Design & Printing
Venue: To be advised
Date: 11 April 2015 (Saturday) - Update
Time: 2:00pm to 6:00pm
3D Printing Workshop (Session 2) – Finalisation of 3D Design of Car Parts & Printing
Venue: To be advised
Date: 12 April 2015 (Sunday) - Update
Time: 2:00pm to 6:00pm
Eligibility - Update
1. Please ensure that you can commit to ONE of the above-mentioned dates for 3D Printing workshop.
* Strongly suggest to participate both workshop.
2. Participation in 3D Printing workshops and Drift Competition is compulsory.
3. All cars must be fitted with 3D printed spoiler and rims to be eligible to participate in this event.
Category 1: Counter Steering Class (4WD).
Name / Car / Mobile / Email
01. Clifford Ong / Yokomo DPM / Mobile & Email submitted.
02. Sean Ng / Yokomo DIB / Mobile & Email submitted.
03. Darryl Tan / Yokomo DIB / Mobile & Email submitted.
04. Melvin Poon / StreetJam OTA / Mobile & Email submitted.
05. Doran Yew / Kazama / Mobile & Email submitted.
06. Michael / Yokomo DIB / Mobile & Email submitted.
07. Shawn Chia / Yokomo DIB / Mobile & Email submitted.
08. Willy Ho / Yokomo DIB / Mobile & Email submitted.
09. Marcus Tan / StreetJam OTA R31 / Mobile & Email submitted.
10. Md Thaqif / Yokomo DIB / Mobile & Email submitted.
11.
12.
13.
14.
15.
Category 2: Rear Wheel Drive (RWD).
Name / Car / Mobile / Email
01. Bernard Saw / MST FXX-D / Mobile & Email submitted.
02. Joohniam Lew / Yokomo DIB / Mobile & Email submitted.
03. Chua Eng Soon / Yokomo MR4TC / Mobile & Email submitted.
04. Benjamin Chua / Yokomo DPM / Mobile & Email submitted.
05.
06.
07.
08.
09.
10.
* RWD – Maximum weight 1,800grams include body shell & batteries.
Closing Date
10 April 2015, Monday or when maximum entries are received (First come first served and see Note below).
Please see Post #1 for full information.
Thank you.
Autodrift is excited to co-organize a Special Edition RC drifting competition incorporating 3D printed parts.
Venue: Suntec Singapore Convention & Exhibition Centre
Date: 25 April 2015 (Saturday)
Time: 9.00am to 7:00pm
Entry Fees: Free Entry
* Maximum Entries: 40 participants in total for both CS and RWD categories.
Please, however, confirm that you are available to commit your time in the pre-event workshops and competition dates before registering.
3D Printing Workshop (Session 1) – Introduction to 3D Design & Printing
Venue: To be advised
Date: 11 April 2015 (Saturday) - Update
Time: 2:00pm to 6:00pm
3D Printing Workshop (Session 2) – Finalisation of 3D Design of Car Parts & Printing
Venue: To be advised
Date: 12 April 2015 (Sunday) - Update
Time: 2:00pm to 6:00pm
Eligibility - Update
1. Please ensure that you can commit to ONE of the above-mentioned dates for 3D Printing workshop.
* Strongly suggest to participate both workshop.
2. Participation in 3D Printing workshops and Drift Competition is compulsory.
3. All cars must be fitted with 3D printed spoiler and rims to be eligible to participate in this event.
Category 1: Counter Steering Class (4WD).
Name / Car / Mobile / Email
01. Clifford Ong / Yokomo DPM / Mobile & Email submitted.
02. Sean Ng / Yokomo DIB / Mobile & Email submitted.
03. Darryl Tan / Yokomo DIB / Mobile & Email submitted.
04. Melvin Poon / StreetJam OTA / Mobile & Email submitted.
05. Doran Yew / Kazama / Mobile & Email submitted.
06. Michael / Yokomo DIB / Mobile & Email submitted.
07. Shawn Chia / Yokomo DIB / Mobile & Email submitted.
08. Willy Ho / Yokomo DIB / Mobile & Email submitted.
09. Marcus Tan / StreetJam OTA R31 / Mobile & Email submitted.
10. Md Thaqif / Yokomo DIB / Mobile & Email submitted.
11.
12.
13.
14.
15.
Category 2: Rear Wheel Drive (RWD).
Name / Car / Mobile / Email
01. Bernard Saw / MST FXX-D / Mobile & Email submitted.
02. Joohniam Lew / Yokomo DIB / Mobile & Email submitted.
03. Chua Eng Soon / Yokomo MR4TC / Mobile & Email submitted.
04. Benjamin Chua / Yokomo DPM / Mobile & Email submitted.
05.
06.
07.
08.
09.
10.
* RWD – Maximum weight 1,800grams include body shell & batteries.
Closing Date
10 April 2015, Monday or when maximum entries are received (First come first served and see Note below).
Please see Post #1 for full information.
Thank you.
Last edited by yokomo-SIA; 04-07-2015 at 01:37 AM.
#9
Dear All Drifters,
Autodrift is excited to co-organize a Special Edition RC drifting competition incorporating 3D printed parts.
Venue: Suntec Singapore Convention & Exhibition Centre
Date: 25 April 2015 (Saturday)
Time: 9.00am to 7:00pm
Entry Fees: Free Entry
* Maximum Entries: 40 participants in total for both CS and RWD categories.
Please, however, confirm that you are available to commit your time in the pre-event workshops and competition dates before registering.
3D Printing Workshop (Session 1) – Introduction to 3D Design & Printing
Venue: To be advised
Date: 11 April 2015 (Saturday) - Update
Time: 2:00pm to 6:00pm
3D Printing Workshop (Session 2) – Finalisation of 3D Design of Car Parts & Printing
Venue: To be advised
Date: 12 April 2015 (Sunday) - Update
Time: 2:00pm to 6:00pm
Eligibility - Update
1. Please ensure that you can commit to ONE of the above-mentioned dates for 3D Printing workshop.
* Strongly suggest to participate both workshop.
2. Participation in 3D Printing workshops and Drift Competition is compulsory.
3. All cars must be fitted with 3D printed spoiler and rims to be eligible to participate in this event.
Category 1: Counter Steering Class (4WD).
Name / Car / Mobile / Email
01. Clifford Ong / Yokomo DPM / Mobile & Email submitted.
02. Sean Ng / Yokomo DIB / Mobile & Email submitted.
03. Darryl Tan / Yokomo DIB / Mobile & Email submitted.
04. Melvin Poon / StreetJam OTA / Mobile & Email submitted.
05. Doran Yew / Kazama / Mobile & Email submitted.
06. Michael / Yokomo DIB / Mobile & Email submitted.
07. Shawn Chia / Yokomo DIB / Mobile & Email submitted.
08. Willy Ho / Yokomo DIB / Mobile & Email submitted.
09. Marcus Tan / StreetJam OTA R31 / Mobile & Email submitted.
10. Md Thaqif / Yokomo DIB / Mobile & Email submitted.
11. Muhamat Amin / D3 / Mobile & Email submitted.
12.
13.
14.
15.
Category 2: Rear Wheel Drive (RWD).
Name / Car / Mobile / Email
01. Bernard Saw / MST FXX-D / Mobile & Email submitted.
02. Joohniam Lew / Yokomo DIB / Mobile & Email submitted.
03. Chua Eng Soon / Yokomo MR4TC / Mobile & Email submitted.
04. Benjamin Chua / Yokomo DPM / Mobile & Email submitted.
05.
06.
07.
08.
09.
10.
* RWD – Maximum weight 1,800grams include body shell & batteries.
Closing Date
10 April 2015, Friday or when maximum entries are received (First come first served and see Note below).
Please see Post #1 for full information.
Thank you.
Autodrift is excited to co-organize a Special Edition RC drifting competition incorporating 3D printed parts.
Venue: Suntec Singapore Convention & Exhibition Centre
Date: 25 April 2015 (Saturday)
Time: 9.00am to 7:00pm
Entry Fees: Free Entry
* Maximum Entries: 40 participants in total for both CS and RWD categories.
Please, however, confirm that you are available to commit your time in the pre-event workshops and competition dates before registering.
3D Printing Workshop (Session 1) – Introduction to 3D Design & Printing
Venue: To be advised
Date: 11 April 2015 (Saturday) - Update
Time: 2:00pm to 6:00pm
3D Printing Workshop (Session 2) – Finalisation of 3D Design of Car Parts & Printing
Venue: To be advised
Date: 12 April 2015 (Sunday) - Update
Time: 2:00pm to 6:00pm
Eligibility - Update
1. Please ensure that you can commit to ONE of the above-mentioned dates for 3D Printing workshop.
* Strongly suggest to participate both workshop.
2. Participation in 3D Printing workshops and Drift Competition is compulsory.
3. All cars must be fitted with 3D printed spoiler and rims to be eligible to participate in this event.
Category 1: Counter Steering Class (4WD).
Name / Car / Mobile / Email
01. Clifford Ong / Yokomo DPM / Mobile & Email submitted.
02. Sean Ng / Yokomo DIB / Mobile & Email submitted.
03. Darryl Tan / Yokomo DIB / Mobile & Email submitted.
04. Melvin Poon / StreetJam OTA / Mobile & Email submitted.
05. Doran Yew / Kazama / Mobile & Email submitted.
06. Michael / Yokomo DIB / Mobile & Email submitted.
07. Shawn Chia / Yokomo DIB / Mobile & Email submitted.
08. Willy Ho / Yokomo DIB / Mobile & Email submitted.
09. Marcus Tan / StreetJam OTA R31 / Mobile & Email submitted.
10. Md Thaqif / Yokomo DIB / Mobile & Email submitted.
11. Muhamat Amin / D3 / Mobile & Email submitted.
12.
13.
14.
15.
Category 2: Rear Wheel Drive (RWD).
Name / Car / Mobile / Email
01. Bernard Saw / MST FXX-D / Mobile & Email submitted.
02. Joohniam Lew / Yokomo DIB / Mobile & Email submitted.
03. Chua Eng Soon / Yokomo MR4TC / Mobile & Email submitted.
04. Benjamin Chua / Yokomo DPM / Mobile & Email submitted.
05.
06.
07.
08.
09.
10.
* RWD – Maximum weight 1,800grams include body shell & batteries.
Closing Date
10 April 2015, Friday or when maximum entries are received (First come first served and see Note below).
Please see Post #1 for full information.
Thank you.
Last edited by yokomo-SIA; 04-07-2015 at 08:28 AM.
#10
Dear All Drifters,
Autodrift is excited to co-organize a Special Edition RC drifting competition incorporating 3D printed parts.
Venue: Suntec Singapore Convention & Exhibition Centre
Date: 25 April 2015 (Saturday)
Time: 9.00am to 7:00pm
Entry Fees: Free Entry
* Maximum Entries: 40 participants in total for both CS and RWD categories.
Please, however, confirm that you are available to commit your time in the pre-event workshops and competition dates before registering.
3D Printing Workshop (Session 1) – Introduction to 3D Design & Printing
Venue: To be advised
Date: 11 April 2015 (Saturday) - Update
Time: 2:00pm to 6:00pm
3D Printing Workshop (Session 2) – Finalisation of 3D Design of Car Parts & Printing
Venue: To be advised
Date: 12 April 2015 (Sunday) - Update
Time: 2:00pm to 6:00pm
Eligibility - Update
1. Please ensure that you can commit to ONE of the above-mentioned dates for 3D Printing workshop.
* Strongly suggest to participate both workshop.
2. Participation in 3D Printing workshops and Drift Competition is compulsory.
3. All cars must be fitted with 3D printed spoiler and rims to be eligible to participate in this event.
Category 1: Counter Steering Class (4WD).
Name / Car / Mobile / Email
01. Clifford Ong / Yokomo DPM / Mobile & Email submitted.
02. Sean Ng / Yokomo DIB / Mobile & Email submitted.
03. Darryl Tan / Yokomo DIB / Mobile & Email submitted.
04. Melvin Poon / StreetJam OTA / Mobile & Email submitted.
05. Doran Yew / Kazama / Mobile & Email submitted.
06. Michael / Yokomo DIB / Mobile & Email submitted.
07. Shawn Chia / Yokomo DIB / Mobile & Email submitted.
08. Willy Ho / Yokomo DIB / Mobile & Email submitted.
09. Marcus Tan / StreetJam OTA R31 / Mobile & Email submitted.
10. Md Thaqif / Yokomo DIB / Mobile & Email submitted.
11. Muhamat Amin / D3 / Mobile & Email submitted.
12.
13.
14.
15.
Category 2: Rear Wheel Drive (RWD).
Name / Car / Mobile / Email
01. Bernard Saw / MST FXX-D / Mobile & Email submitted.
02. Joohniam Lew / Yokomo DIB / Mobile & Email submitted.
03. Chua Eng Soon / Yokomo MR4TC / Mobile & Email submitted.
04. Benjamin Chua / Yokomo DPM / Mobile & Email submitted.
05. Francis Tay / MST FXXD S / Mobile & Email submitted.
06.
07.
08.
09.
10.
* RWD – Maximum weight 1,800grams include body shell & batteries.
Closing Date
10 April 2015, Friday or when maximum entries are received (First come first served and see Note below).
Please see Post #1 for full information.
Thank you.
Autodrift is excited to co-organize a Special Edition RC drifting competition incorporating 3D printed parts.
Venue: Suntec Singapore Convention & Exhibition Centre
Date: 25 April 2015 (Saturday)
Time: 9.00am to 7:00pm
Entry Fees: Free Entry
* Maximum Entries: 40 participants in total for both CS and RWD categories.
Please, however, confirm that you are available to commit your time in the pre-event workshops and competition dates before registering.
3D Printing Workshop (Session 1) – Introduction to 3D Design & Printing
Venue: To be advised
Date: 11 April 2015 (Saturday) - Update
Time: 2:00pm to 6:00pm
3D Printing Workshop (Session 2) – Finalisation of 3D Design of Car Parts & Printing
Venue: To be advised
Date: 12 April 2015 (Sunday) - Update
Time: 2:00pm to 6:00pm
Eligibility - Update
1. Please ensure that you can commit to ONE of the above-mentioned dates for 3D Printing workshop.
* Strongly suggest to participate both workshop.
2. Participation in 3D Printing workshops and Drift Competition is compulsory.
3. All cars must be fitted with 3D printed spoiler and rims to be eligible to participate in this event.
Category 1: Counter Steering Class (4WD).
Name / Car / Mobile / Email
01. Clifford Ong / Yokomo DPM / Mobile & Email submitted.
02. Sean Ng / Yokomo DIB / Mobile & Email submitted.
03. Darryl Tan / Yokomo DIB / Mobile & Email submitted.
04. Melvin Poon / StreetJam OTA / Mobile & Email submitted.
05. Doran Yew / Kazama / Mobile & Email submitted.
06. Michael / Yokomo DIB / Mobile & Email submitted.
07. Shawn Chia / Yokomo DIB / Mobile & Email submitted.
08. Willy Ho / Yokomo DIB / Mobile & Email submitted.
09. Marcus Tan / StreetJam OTA R31 / Mobile & Email submitted.
10. Md Thaqif / Yokomo DIB / Mobile & Email submitted.
11. Muhamat Amin / D3 / Mobile & Email submitted.
12.
13.
14.
15.
Category 2: Rear Wheel Drive (RWD).
Name / Car / Mobile / Email
01. Bernard Saw / MST FXX-D / Mobile & Email submitted.
02. Joohniam Lew / Yokomo DIB / Mobile & Email submitted.
03. Chua Eng Soon / Yokomo MR4TC / Mobile & Email submitted.
04. Benjamin Chua / Yokomo DPM / Mobile & Email submitted.
05. Francis Tay / MST FXXD S / Mobile & Email submitted.
06.
07.
08.
09.
10.
* RWD – Maximum weight 1,800grams include body shell & batteries.
Closing Date
10 April 2015, Friday or when maximum entries are received (First come first served and see Note below).
Please see Post #1 for full information.
Thank you.
#11
Dear All Drifters,
Autodrift is excited to co-organize a Special Edition RC drifting competition incorporating 3D printed parts.
Venue: Suntec Singapore Convention & Exhibition Centre
Date: 25 April 2015 (Saturday)
Time: 9.00am to 7:00pm
Entry Fees: Free Entry
* Maximum Entries: 40 participants in total for both CS and RWD categories.
Please, however, confirm that you are available to commit your time in the pre-event workshops and competition dates before registering.
3D Printing Workshop (Session 1) – Introduction to 3D Design & Printing
Venue: To be advised
Date: 11 April 2015 (Saturday) - Update
Time: 2:00pm to 6:00pm
3D Printing Workshop (Session 2) – Finalisation of 3D Design of Car Parts & Printing
Venue: To be advised
Date: 12 April 2015 (Sunday) - Update
Time: 2:00pm to 6:00pm
Eligibility - Update
1. Please ensure that you can commit to ONE of the above-mentioned dates for 3D Printing workshop.
* Strongly suggest to participate both workshop.
2. Participation in 3D Printing workshops and Drift Competition is compulsory.
3. All cars must be fitted with 3D printed spoiler and rims to be eligible to participate in this event.
Category 1: Counter Steering Class (4WD).
Name / Car / Mobile / Email
01. Clifford Ong / Yokomo DPM / Mobile & Email submitted.
02. Sean Ng / Yokomo DIB / Mobile & Email submitted.
03. Darryl Tan / Yokomo DIB / Mobile & Email submitted.
04. Melvin Poon / StreetJam OTA / Mobile & Email submitted.
05. Doran Yew / Kazama / Mobile & Email submitted.
06. Michael / Yokomo DIB / Mobile & Email submitted.
07. Shawn Chia / Yokomo DIB / Mobile & Email submitted.
08. Willy Ho / Yokomo DIB / Mobile & Email submitted.
09. Marcus Tan / StreetJam OTA R31 / Mobile & Email submitted.
10. Muhamat Amin / D3 / Mobile & Email submitted.
11.
12.
13.
14.
15.
Category 2: Rear Wheel Drive (RWD).
Name / Car / Mobile / Email
01. Bernard Saw / MST FXX-D / Mobile & Email submitted.
02. Joohniam Lew / Yokomo DIB / Mobile & Email submitted.
03. Chua Eng Soon / Yokomo MR4TC / Mobile & Email submitted.
04. Benjamin Chua / Yokomo DPM / Mobile & Email submitted.
05. Francis Tay / MST FXXD S / Mobile & Email submitted.
06.
07.
08.
09.
10.
* RWD – Maximum weight 1,800grams include body shell & batteries.
Closing Date
10 April 2015, Friday or when maximum entries are received (First come first served and see Note below).
Please see Post #1 for full information.
Thank you.
Autodrift is excited to co-organize a Special Edition RC drifting competition incorporating 3D printed parts.
Venue: Suntec Singapore Convention & Exhibition Centre
Date: 25 April 2015 (Saturday)
Time: 9.00am to 7:00pm
Entry Fees: Free Entry
* Maximum Entries: 40 participants in total for both CS and RWD categories.
Please, however, confirm that you are available to commit your time in the pre-event workshops and competition dates before registering.
3D Printing Workshop (Session 1) – Introduction to 3D Design & Printing
Venue: To be advised
Date: 11 April 2015 (Saturday) - Update
Time: 2:00pm to 6:00pm
3D Printing Workshop (Session 2) – Finalisation of 3D Design of Car Parts & Printing
Venue: To be advised
Date: 12 April 2015 (Sunday) - Update
Time: 2:00pm to 6:00pm
Eligibility - Update
1. Please ensure that you can commit to ONE of the above-mentioned dates for 3D Printing workshop.
* Strongly suggest to participate both workshop.
2. Participation in 3D Printing workshops and Drift Competition is compulsory.
3. All cars must be fitted with 3D printed spoiler and rims to be eligible to participate in this event.
Category 1: Counter Steering Class (4WD).
Name / Car / Mobile / Email
01. Clifford Ong / Yokomo DPM / Mobile & Email submitted.
02. Sean Ng / Yokomo DIB / Mobile & Email submitted.
03. Darryl Tan / Yokomo DIB / Mobile & Email submitted.
04. Melvin Poon / StreetJam OTA / Mobile & Email submitted.
05. Doran Yew / Kazama / Mobile & Email submitted.
06. Michael / Yokomo DIB / Mobile & Email submitted.
07. Shawn Chia / Yokomo DIB / Mobile & Email submitted.
08. Willy Ho / Yokomo DIB / Mobile & Email submitted.
09. Marcus Tan / StreetJam OTA R31 / Mobile & Email submitted.
10. Muhamat Amin / D3 / Mobile & Email submitted.
11.
12.
13.
14.
15.
Category 2: Rear Wheel Drive (RWD).
Name / Car / Mobile / Email
01. Bernard Saw / MST FXX-D / Mobile & Email submitted.
02. Joohniam Lew / Yokomo DIB / Mobile & Email submitted.
03. Chua Eng Soon / Yokomo MR4TC / Mobile & Email submitted.
04. Benjamin Chua / Yokomo DPM / Mobile & Email submitted.
05. Francis Tay / MST FXXD S / Mobile & Email submitted.
06.
07.
08.
09.
10.
* RWD – Maximum weight 1,800grams include body shell & batteries.
Closing Date
10 April 2015, Friday or when maximum entries are received (First come first served and see Note below).
Please see Post #1 for full information.
Thank you.
Last edited by yokomo-SIA; 04-07-2015 at 09:26 PM.
#12
Dear All Drifters,
Autodrift is excited to co-organize a Special Edition RC drifting competition incorporating 3D printed parts.
Venue: Suntec Singapore Convention & Exhibition Centre
Date: 25 April 2015 (Saturday)
Time: 9.00am to 7:00pm
Entry Fees: Free Entry
* Maximum Entries: 40 participants in total for both CS and RWD categories.
Please, however, confirm that you are available to commit your time in the pre-event workshops and competition dates before registering.
3D Printing Workshop (Session 1) – Introduction to 3D Design & Printing
Venue: To be advised
Date: 11 April 2015 (Saturday) - Update
Time: 2:00pm to 6:00pm
3D Printing Workshop (Session 2) – Finalisation of 3D Design of Car Parts & Printing
Venue: To be advised
Date: 12 April 2015 (Sunday) - Update
Time: 2:00pm to 6:00pm
Eligibility - Update
1. Please ensure that you can commit to ONE of the above-mentioned dates for 3D Printing workshop.
* Strongly suggest to participate both workshop.
2. Participation in 3D Printing workshops and Drift Competition is compulsory.
3. All cars must be fitted with 3D printed spoiler and rims to be eligible to participate in this event.
Category 1: Counter Steering Class (4WD).
Name / Car / Mobile / Email
01. Clifford Ong / Yokomo DPM / Mobile & Email submitted.
02. Sean Ng / Yokomo DIB / Mobile & Email submitted.
03. Darryl Tan / Yokomo DIB / Mobile & Email submitted.
04. Melvin Poon / StreetJam OTA / Mobile & Email submitted.
05. Doran Yew / Kazama / Mobile & Email submitted.
06. Michael / Yokomo DIB / Mobile & Email submitted.
07. Shawn Chia / Yokomo DIB / Mobile & Email submitted.
08. Willy Ho / Yokomo DIB / Mobile & Email submitted.
09. Marcus Tan / StreetJam OTA R31 / Mobile & Email submitted.
10. Muhamat Amin / D3 / Mobile & Email submitted.
11.
12.
13.
14.
15.
Category 2: Rear Wheel Drive (RWD).
Name / Car / Mobile / Email
01. Bernard Saw / MST FXX-D / Mobile & Email submitted.
02. Joohniam Lew / Yokomo DIB / Mobile & Email submitted.
03. Chua Eng Soon / Yokomo MR4TC / Mobile & Email submitted.
04. Benjamin Chua / Yokomo DPM / Mobile & Email submitted.
05. Francis Tay / MST FXXD S / Mobile & Email submitted.
06. Jun Hua / Yokomo DRB / Mobile & Email submitted.
07.
08.
09.
10.
* RWD – Maximum weight 1,800grams include body shell & batteries.
Closing Date
10 April 2015, Friday or when maximum entries are received (First come first served and see Note below).
Please see Post #1 for full information.
Thank you.
Autodrift is excited to co-organize a Special Edition RC drifting competition incorporating 3D printed parts.
Venue: Suntec Singapore Convention & Exhibition Centre
Date: 25 April 2015 (Saturday)
Time: 9.00am to 7:00pm
Entry Fees: Free Entry
* Maximum Entries: 40 participants in total for both CS and RWD categories.
Please, however, confirm that you are available to commit your time in the pre-event workshops and competition dates before registering.
3D Printing Workshop (Session 1) – Introduction to 3D Design & Printing
Venue: To be advised
Date: 11 April 2015 (Saturday) - Update
Time: 2:00pm to 6:00pm
3D Printing Workshop (Session 2) – Finalisation of 3D Design of Car Parts & Printing
Venue: To be advised
Date: 12 April 2015 (Sunday) - Update
Time: 2:00pm to 6:00pm
Eligibility - Update
1. Please ensure that you can commit to ONE of the above-mentioned dates for 3D Printing workshop.
* Strongly suggest to participate both workshop.
2. Participation in 3D Printing workshops and Drift Competition is compulsory.
3. All cars must be fitted with 3D printed spoiler and rims to be eligible to participate in this event.
Category 1: Counter Steering Class (4WD).
Name / Car / Mobile / Email
01. Clifford Ong / Yokomo DPM / Mobile & Email submitted.
02. Sean Ng / Yokomo DIB / Mobile & Email submitted.
03. Darryl Tan / Yokomo DIB / Mobile & Email submitted.
04. Melvin Poon / StreetJam OTA / Mobile & Email submitted.
05. Doran Yew / Kazama / Mobile & Email submitted.
06. Michael / Yokomo DIB / Mobile & Email submitted.
07. Shawn Chia / Yokomo DIB / Mobile & Email submitted.
08. Willy Ho / Yokomo DIB / Mobile & Email submitted.
09. Marcus Tan / StreetJam OTA R31 / Mobile & Email submitted.
10. Muhamat Amin / D3 / Mobile & Email submitted.
11.
12.
13.
14.
15.
Category 2: Rear Wheel Drive (RWD).
Name / Car / Mobile / Email
01. Bernard Saw / MST FXX-D / Mobile & Email submitted.
02. Joohniam Lew / Yokomo DIB / Mobile & Email submitted.
03. Chua Eng Soon / Yokomo MR4TC / Mobile & Email submitted.
04. Benjamin Chua / Yokomo DPM / Mobile & Email submitted.
05. Francis Tay / MST FXXD S / Mobile & Email submitted.
06. Jun Hua / Yokomo DRB / Mobile & Email submitted.
07.
08.
09.
10.
* RWD – Maximum weight 1,800grams include body shell & batteries.
Closing Date
10 April 2015, Friday or when maximum entries are received (First come first served and see Note below).
Please see Post #1 for full information.
Thank you.
#13
Dear All Drifters,
Autodrift is excited to co-organize a Special Edition RC drifting competition incorporating 3D printed parts.
Venue: Suntec Singapore Convention & Exhibition Centre
Date: 25 April 2015 (Saturday)
Time: 9.00am to 7:00pm
Entry Fees: Free Entry
* Maximum Entries: 40 participants in total for both CS and RWD categories.
Please, however, confirm that you are available to commit your time in the pre-event workshops and competition dates before registering.
3D Printing Workshop (Session 1) – Introduction to 3D Design & Printing
Venue: To be advised
Date: 11 April 2015 (Saturday) - Update
Time: 2:00pm to 6:00pm
3D Printing Workshop (Session 2) – Finalisation of 3D Design of Car Parts & Printing
Venue: To be advised
Date: 12 April 2015 (Sunday) - Update
Time: 2:00pm to 6:00pm
Eligibility - Update
1. Please ensure that you can commit to ONE of the above-mentioned dates for 3D Printing workshop.
* Strongly suggest to participate both workshop.
2. Participation in 3D Printing workshops and Drift Competition is compulsory.
3. All cars must be fitted with 3D printed spoiler and rims to be eligible to participate in this event.
Category 1: Counter Steering Class (4WD).
Name / Car / Mobile / Email
01. Clifford Ong / Yokomo DPM / Mobile & Email submitted.
02. Sean Ng / Yokomo DIB / Mobile & Email submitted.
03. Darryl Tan / Yokomo DIB / Mobile & Email submitted.
04. Melvin Poon / StreetJam OTA / Mobile & Email submitted.
05. Doran Yew / Kazama / Mobile & Email submitted.
06. Michael / Yokomo DIB / Mobile & Email submitted.
07. Shawn Chia / Yokomo DIB / Mobile & Email submitted.
08. Willy Ho / Yokomo DIB / Mobile & Email submitted.
09. Marcus Tan / StreetJam OTA R31 / Mobile & Email submitted.
10. Muhamat Amin / D3 / Mobile & Email submitted.
11. Md Thaqif / Yokomo DIB / Mobile & Email submitted.
12.
13.
14.
15.
Category 2: Rear Wheel Drive (RWD).
Name / Car / Mobile / Email
01. Bernard Saw / MST FXX-D / Mobile & Email submitted.
02. Joohniam Lew / Yokomo DIB / Mobile & Email submitted.
03. Chua Eng Soon / Yokomo MR4TC / Mobile & Email submitted.
04. Benjamin Chua / Yokomo DPM / Mobile & Email submitted.
05. Francis Tay / MST FXXD S / Mobile & Email submitted.
06. Jun Hua / Yokomo DRB / Mobile & Email submitted.
07.
08.
09.
10.
* RWD – Maximum weight 1,800grams include body shell & batteries.
Closing Date
10 April 2015, Friday or when maximum entries are received (First come first served and see Note below).
Please see Post #1 for full information.
Thank you.
Autodrift is excited to co-organize a Special Edition RC drifting competition incorporating 3D printed parts.
Venue: Suntec Singapore Convention & Exhibition Centre
Date: 25 April 2015 (Saturday)
Time: 9.00am to 7:00pm
Entry Fees: Free Entry
* Maximum Entries: 40 participants in total for both CS and RWD categories.
Please, however, confirm that you are available to commit your time in the pre-event workshops and competition dates before registering.
3D Printing Workshop (Session 1) – Introduction to 3D Design & Printing
Venue: To be advised
Date: 11 April 2015 (Saturday) - Update
Time: 2:00pm to 6:00pm
3D Printing Workshop (Session 2) – Finalisation of 3D Design of Car Parts & Printing
Venue: To be advised
Date: 12 April 2015 (Sunday) - Update
Time: 2:00pm to 6:00pm
Eligibility - Update
1. Please ensure that you can commit to ONE of the above-mentioned dates for 3D Printing workshop.
* Strongly suggest to participate both workshop.
2. Participation in 3D Printing workshops and Drift Competition is compulsory.
3. All cars must be fitted with 3D printed spoiler and rims to be eligible to participate in this event.
Category 1: Counter Steering Class (4WD).
Name / Car / Mobile / Email
01. Clifford Ong / Yokomo DPM / Mobile & Email submitted.
02. Sean Ng / Yokomo DIB / Mobile & Email submitted.
03. Darryl Tan / Yokomo DIB / Mobile & Email submitted.
04. Melvin Poon / StreetJam OTA / Mobile & Email submitted.
05. Doran Yew / Kazama / Mobile & Email submitted.
06. Michael / Yokomo DIB / Mobile & Email submitted.
07. Shawn Chia / Yokomo DIB / Mobile & Email submitted.
08. Willy Ho / Yokomo DIB / Mobile & Email submitted.
09. Marcus Tan / StreetJam OTA R31 / Mobile & Email submitted.
10. Muhamat Amin / D3 / Mobile & Email submitted.
11. Md Thaqif / Yokomo DIB / Mobile & Email submitted.
12.
13.
14.
15.
Category 2: Rear Wheel Drive (RWD).
Name / Car / Mobile / Email
01. Bernard Saw / MST FXX-D / Mobile & Email submitted.
02. Joohniam Lew / Yokomo DIB / Mobile & Email submitted.
03. Chua Eng Soon / Yokomo MR4TC / Mobile & Email submitted.
04. Benjamin Chua / Yokomo DPM / Mobile & Email submitted.
05. Francis Tay / MST FXXD S / Mobile & Email submitted.
06. Jun Hua / Yokomo DRB / Mobile & Email submitted.
07.
08.
09.
10.
* RWD – Maximum weight 1,800grams include body shell & batteries.
Closing Date
10 April 2015, Friday or when maximum entries are received (First come first served and see Note below).
Please see Post #1 for full information.
Thank you.
#14
Dear All Drifters,
Autodrift is excited to co-organize a Special Edition RC drifting competition incorporating 3D printed parts.
Venue: Suntec Singapore Convention & Exhibition Centre
Date: 25 April 2015 (Saturday)
Time: 9.00am to 7:00pm
Entry Fees: Free Entry
* Maximum Entries: 40 participants in total for both CS and RWD categories.
Please, however, confirm that you are available to commit your time in the pre-event workshops and competition dates before registering.
3D Printing Workshop (Session 1) – Introduction to 3D Design & Printing
Venue: To be advised
Date: 11 April 2015 (Saturday) - Update
Time: 2:00pm to 6:00pm
3D Printing Workshop (Session 2) – Finalisation of 3D Design of Car Parts & Printing
Venue: To be advised
Date: 12 April 2015 (Sunday) - Update
Time: 2:00pm to 6:00pm
Eligibility - Update
1. Please ensure that you can commit to ONE of the above-mentioned dates for 3D Printing workshop.
* Strongly suggest to participate both workshop.
2. Participation in 3D Printing workshops and Drift Competition is compulsory.
3. All cars must be fitted with 3D printed spoiler and rims to be eligible to participate in this event.
Category 1: Counter Steering Class (4WD).
Name / Car / Mobile / Email
01. Clifford Ong / Yokomo DPM / Mobile & Email submitted.
02. Sean Ng / Yokomo DIB / Mobile & Email submitted.
03. Darryl Tan / Yokomo DIB / Mobile & Email submitted.
04. Melvin Poon / StreetJam OTA / Mobile & Email submitted.
05. Doran Yew / Kazama / Mobile & Email submitted.
06. Michael / Yokomo DIB / Mobile & Email submitted.
07. Shawn Chia / Yokomo DIB / Mobile & Email submitted.
08. Willy Ho / Yokomo DIB / Mobile & Email submitted.
09. Marcus Tan / StreetJam OTA R31 / Mobile & Email submitted.
10. Muhamat Amin / D3 / Mobile & Email submitted.
11. Md Thaqif / Yokomo DIB / Mobile & Email submitted.
12.
13.
14.
15.
Category 2: Rear Wheel Drive (RWD).
Name / Car / Mobile / Email
01. Bernard Saw / MST FXX-D / Mobile & Email submitted.
02. Joohniam Lew / Yokomo DIB / Mobile & Email submitted.
03. Chua Eng Soon / Yokomo MR4TC / Mobile & Email submitted.
04. Benjamin Chua / Yokomo DPM / Mobile & Email submitted.
05. Francis Tay / MST FXXD S / Mobile & Email submitted.
06. Jun Hua / Yokomo DRB / Mobile & Email submitted.
07. Frendy Tay / MST FXX-D S / Mobile & Email submitted.
08. Marc / MST XXX-D / Mobile & Email submitted.
09.
10.
* RWD – Maximum weight 1,800grams include body shell & batteries.
Closing Date
10 April 2015, Friday or when maximum entries are received (First come first served and see Note below).
Please see Post #1 for full information.
Thank you.
Autodrift is excited to co-organize a Special Edition RC drifting competition incorporating 3D printed parts.
Venue: Suntec Singapore Convention & Exhibition Centre
Date: 25 April 2015 (Saturday)
Time: 9.00am to 7:00pm
Entry Fees: Free Entry
* Maximum Entries: 40 participants in total for both CS and RWD categories.
Please, however, confirm that you are available to commit your time in the pre-event workshops and competition dates before registering.
3D Printing Workshop (Session 1) – Introduction to 3D Design & Printing
Venue: To be advised
Date: 11 April 2015 (Saturday) - Update
Time: 2:00pm to 6:00pm
3D Printing Workshop (Session 2) – Finalisation of 3D Design of Car Parts & Printing
Venue: To be advised
Date: 12 April 2015 (Sunday) - Update
Time: 2:00pm to 6:00pm
Eligibility - Update
1. Please ensure that you can commit to ONE of the above-mentioned dates for 3D Printing workshop.
* Strongly suggest to participate both workshop.
2. Participation in 3D Printing workshops and Drift Competition is compulsory.
3. All cars must be fitted with 3D printed spoiler and rims to be eligible to participate in this event.
Category 1: Counter Steering Class (4WD).
Name / Car / Mobile / Email
01. Clifford Ong / Yokomo DPM / Mobile & Email submitted.
02. Sean Ng / Yokomo DIB / Mobile & Email submitted.
03. Darryl Tan / Yokomo DIB / Mobile & Email submitted.
04. Melvin Poon / StreetJam OTA / Mobile & Email submitted.
05. Doran Yew / Kazama / Mobile & Email submitted.
06. Michael / Yokomo DIB / Mobile & Email submitted.
07. Shawn Chia / Yokomo DIB / Mobile & Email submitted.
08. Willy Ho / Yokomo DIB / Mobile & Email submitted.
09. Marcus Tan / StreetJam OTA R31 / Mobile & Email submitted.
10. Muhamat Amin / D3 / Mobile & Email submitted.
11. Md Thaqif / Yokomo DIB / Mobile & Email submitted.
12.
13.
14.
15.
Category 2: Rear Wheel Drive (RWD).
Name / Car / Mobile / Email
01. Bernard Saw / MST FXX-D / Mobile & Email submitted.
02. Joohniam Lew / Yokomo DIB / Mobile & Email submitted.
03. Chua Eng Soon / Yokomo MR4TC / Mobile & Email submitted.
04. Benjamin Chua / Yokomo DPM / Mobile & Email submitted.
05. Francis Tay / MST FXXD S / Mobile & Email submitted.
06. Jun Hua / Yokomo DRB / Mobile & Email submitted.
07. Frendy Tay / MST FXX-D S / Mobile & Email submitted.
08. Marc / MST XXX-D / Mobile & Email submitted.
09.
10.
* RWD – Maximum weight 1,800grams include body shell & batteries.
Closing Date
10 April 2015, Friday or when maximum entries are received (First come first served and see Note below).
Please see Post #1 for full information.
Thank you.
#15
Dear All Participants,
Please check your email for event information on the RC Drift Competition at Tech Saturday.
Event Date: 25 April 2015, Saturday
Event Venue: Suntec Singapore Convention & Exhibition Centre (Level 4, Hall 401-402)
Venue Address: 1 Raffles Boulevard, Suntec City, Singapore 039593
1) Race Schedule (Please take note of the registration time and race briefing time)
2) Venue Layout of Suntec Hall
3) Attire – Casual wear but please wear covered shoes; no slippers/ sandals.
4) Carpet surface.
For more information on other activities happening at Tech Saturday, please visit the event facebook page:https://www.facebook.com/IDA.Singapo...44333196&ref=s
See you at Tech Saturday!
Thank you.
Please check your email for event information on the RC Drift Competition at Tech Saturday.
Event Date: 25 April 2015, Saturday
Event Venue: Suntec Singapore Convention & Exhibition Centre (Level 4, Hall 401-402)
Venue Address: 1 Raffles Boulevard, Suntec City, Singapore 039593
1) Race Schedule (Please take note of the registration time and race briefing time)
2) Venue Layout of Suntec Hall
3) Attire – Casual wear but please wear covered shoes; no slippers/ sandals.
4) Carpet surface.
For more information on other activities happening at Tech Saturday, please visit the event facebook page:https://www.facebook.com/IDA.Singapo...44333196&ref=s
See you at Tech Saturday!
Thank you.