Newbies Queries - Ask and you shall be answered!
#4607
Tech Rookie
Hi Everyone,
Which is a better option?
Thunder Tiger - MT4 G3, 1/8 scale or Losi - TEN SCTE Troy Lee Design (TLD), 1/10 scale
Based on the following track conditions,
Please advise.
Thanks!
Which is a better option?
Thunder Tiger - MT4 G3, 1/8 scale or Losi - TEN SCTE Troy Lee Design (TLD), 1/10 scale
- Considering the following points:
- Durability (able to withstand some light bashing and hard landings)
- Smooth Handling (turnings, good traction, minimum flipping and rolling over etc.)
- Good after market parts support
Based on the following track conditions,
- Off Road/ Dirt Tracks
- Short/ Medium Grass Field
- Concrete Pavement
- BMX Skate Park
- Asphalt Road
Please advise.
Thanks!
#4608
4wd buggy
Guys,
Would a slipper eliminator be a wrong idea for a stock (17.5) 1/10 4wd buggy? I've got a Yokomo yz-4 and found that exotec sells slipper eliminators for a stock 2wd buggies. the item description says they are good for stock 2wd but doesn't mention 4wd buggies...
Can anybody share some knowledge in for this matter?
Thanks
Would a slipper eliminator be a wrong idea for a stock (17.5) 1/10 4wd buggy? I've got a Yokomo yz-4 and found that exotec sells slipper eliminators for a stock 2wd buggies. the item description says they are good for stock 2wd but doesn't mention 4wd buggies...
Can anybody share some knowledge in for this matter?
Thanks
#4609
Tech Rookie
Hi,interested to do some rc drifting
anyone got any recomandations for a rc drift car?
and also where is a good shop to get the stuff at
anyone got any recomandations for a rc drift car?
and also where is a good shop to get the stuff at
#4610
Tech Rookie
Hi All! very new to this. Hope to go long with this hobby!
#4611
Tech Rookie
wtb best electric buggy off road...where can get in singapore...want to buy those best with complete set up
#4612
Tech Rookie
Hi guys! just got and old savage 25. Thinking of replacing the engine because the carb is jammed and there is noises in the piston shaft. Does winnie have a replacement engine?
#4613
Tech Rookie
DBX 1.0 with a KE25
I would just like to know if it is possible to swap the gxr18 to the KE25. I broke the connecting rod on the gxr18 and also the crankcase. I don't want to buy a new engine and not upgrade it at the same time. You can also give me other ideas on what engine i should put in it. Someone said it does fit straight on it, but i don't want to buy it and just waste money.
Last edited by JonnePunkari; 09-06-2017 at 11:54 AM.
#4614
Tech Rookie
I am new and just bought my RTR.. is this forum still alive?
#4615
This is not a frequently updated forum. I think people look into more specific forums. There are particular forums for most car brands and also part specific ones e.g. orca Escs, Orion escs,turnigy motors etc.just to mention some.
Do you have any particular questions? I'm not a pro but have been in the hobby for a couple of years and know some stuff.
Cheers
Do you have any particular questions? I'm not a pro but have been in the hobby for a couple of years and know some stuff.
Cheers
#4616
Tech Rookie
New here
Hello I am new to this hobby. Would be great to drift with some friends here.
#4617
Tech Rookie
Hi, I am new to this hobby, would like to get a new on road car and was wondering if anyone can help with some recommendation. Budget of about $500.
#4618
Tech Rookie
Hello everyone
I'm planing to by a TEKNO mt 410 for bashing i don't really have experience but I've read alot about.
It's a kit that comes without electronic and you need to build it step by step, many ppl enjoying that.
But im looking for a R/C shop to build that instead of dealing with something I have no experience with.
Any help would be appreciate it
best regards
I'm planing to by a TEKNO mt 410 for bashing i don't really have experience but I've read alot about.
It's a kit that comes without electronic and you need to build it step by step, many ppl enjoying that.
But im looking for a R/C shop to build that instead of dealing with something I have no experience with.
Any help would be appreciate it
best regards
#4619
^Most shops offer that service for a fee, just enquire.
It will take some time tho...
It will take some time tho...
#4620
Tech Rookie