gijoe64

iTrader: (30)

Well we ran the car and it was dialed, we do need to get some TRF shocks.
Everyone was shocked when I put the car in the A-main in stock sedan .
The big joke was to see if the car could make the c-main and I put it into the show. My son wants a TAO5, I think that will be our next project.

JiggaMan

Hi, Has anyone tried running the Trinity Stock CO2 Pro Motor on the TT01 chassis?

comments?

Will it work with thw standard ESC?

Preferred gearing?

surrealmaterial

iTrader: (4)

ive got a tt-01 and ive run up to a 19 turn on my TEU-101BK, but it ran real hot... Im not sure of the motor you want to run but if its above 19 turn it should be fine...

surrealmaterial

iTrader: (4)

another thing, on my tt-01 some of the screws thread and can never screw in properly anymore.....anyone have a solution??

thx

MTX

try to apply thread lock on the screw. If doesnt work,then you can try change the screw to the allen screw which has fine thread.

alecladanga

iTrader: (5)

that has happened to tt01, if the alum screws don't work, place just a few drops of super glue on the screw then put it in. just place JUST A FEW super glue on the screw, if you go adding it to the plastic, you'll have a hard time unscerwing it.

surrealmaterial

iTrader: (4)

ok thanks mate

Blueshark

dude, i made my TT01 into a rally WRX...check it out here
http://www.rctech.net/forum/showthread.php?t=114013


and if we use 19T, the TEU ESC will shut down. i ran 55/25 gear ratio and within 2 minutes....it will shut down...

creamsodauk

well finnaly got round to building my TT01 and stippng my TL01 for all the necsasery parts!!

And i added a few extra bumpers from some foam from the packaging from a washing machine box!!!

i know its a little rough but i hope it will save my car from many disasterouse crashs!!! lol i hope!!

p.s. does anyone use the thicker style hex parts that extend your wheels further out?? they look the business on my rear tyres, it jus means the bolts have less thread to hold the tyres on

surrealmaterial

iTrader: (4)

i run a 19t fireball on my TEU and it runs fine...
it gets real hot though, running full throttle for 30mins...

creamsodauk

i run a 19x2 fireball on my mitroniks esc with 15 turn limit!! goes pretty well(i still havent tried my tt01 but wen it was in the tl01 it wenty well)
i have to ask what is best for the speed tuned gears, i have a 19t pinion gear but this wont work with my new speed tuned gears?? correct??

so should i get a 22/23/24/25t?? whats the diffrence and whats best all round ??

also my tl01 wen running used to glitch wen it went off into the distance(not v far) yet my freinds who runs the same setup just a faster motor could go further without glitching?? both batterys were charged so im not sure why that was??

Blackwrench™

iTrader: (4)

Try to tightenen it just enough before it came loose again and put a soldering Iron on the top of the screw. heat it up just enough that you can move the srew while its hot, and then let it cool down. works fine with us.

moshmike

iTrader: (13)

Anyone here looking for a good used TT01? Has some hop ups and is ready to run. Just needs Batts. LMK
Mike

creamsodauk

Well i poped down to my LHS to get an unpainted body to add the finishing touch to my new build

However i ended up paying Ł20 for a ready painted Nissan 350z, which i think looked superb!!

i also brought a 22t pinion for my speed tuned gears but i cant be arsed to strip it down to swap it for a 58t gear!! so i have simply installed the 22t on my motor with the standard gearing and il c what effect that has!!

any way i will post up a pic of the car with chrome wheels, however my balck rims with drift tyres looks far better!!!

enjoy

creamsodauk

Well i poped down to my LHS to get an unpainted body to add the finishing touch to my new build

However i ended up paying Ł20 for a ready painted Nissan 350z, which i think looked superb!!

i also brought a 22t pinion for my speed tuned gears but i cant be arsed to strip it down to swap it for a 58t gear!! so i have simply installed the 22t on my motor with the standard gearing and il c what effect that has!!

any way i will post up a pic of the car with chrome wheels, however my balck rims with drift tyres looks far better!!!

enjoy