FlySky GT3C with custom firmware, firmware flashing kit, 3 x 3ch Rx, 1 x 6ch Rx
#1
FlySky GT3C with custom firmware, firmware flashing kit, 3 x 3ch Rx, 1 x 6ch Rx
*****SOLD*****
I am selling my Flysky Tx/Rxs, as I recently upgraded.
This has been an awesome setup, especially once the custom firmware opened up its full capabilities.
First off, what I'm including:
Flysky GT3C Tx (silver)
- Modded with power switch (to fix steering wheel power button issue)
- Flashing port soldered to main board, and is accessible without disassembly of the Tx (see pic).
2 x FS-GR3E 3ch Rx
1 x FS-GR3F 3ch Rx (this is high voltage capable, up to 8.4v)
1 x FS-R6B 6ch Rx
Overkill RC flashing kit: http://overkillrc.3dcartstores.com/G...-Kit_p_13.html
Here is a breakdown of some of the upgraded features with the custom FW:
- 3-8 Channels
- Trim
- Sub-trim (All channels)
- EPA's (All channels)
- Adjustable Backlight timer
- Inactivity Alarm
- 63 Model Memory
- Calibration Menu
- ST and TH Dead Zone
- Channel Speed (All Channels)
- Dual ESC Mixing
- 4WS Mixing
- Multi Position Switches
- Key Mapping
You can program any button to be whatever you want. It makes the Tx MUCH more powerful.
Here's a manual for the custom FW (v 0.6.1 is currently installed):
http://www.rctech.net/forum/radio-el...re-manual.html
Also 4 binding plugs and 3 antenna tubes.
Let me know if you have any questions!
SOLD
I am selling my Flysky Tx/Rxs, as I recently upgraded.
This has been an awesome setup, especially once the custom firmware opened up its full capabilities.
First off, what I'm including:
Flysky GT3C Tx (silver)
- Modded with power switch (to fix steering wheel power button issue)
- Flashing port soldered to main board, and is accessible without disassembly of the Tx (see pic).
2 x FS-GR3E 3ch Rx
1 x FS-GR3F 3ch Rx (this is high voltage capable, up to 8.4v)
1 x FS-R6B 6ch Rx
Overkill RC flashing kit: http://overkillrc.3dcartstores.com/G...-Kit_p_13.html
Here is a breakdown of some of the upgraded features with the custom FW:
- 3-8 Channels
- Trim
- Sub-trim (All channels)
- EPA's (All channels)
- Adjustable Backlight timer
- Inactivity Alarm
- 63 Model Memory
- Calibration Menu
- ST and TH Dead Zone
- Channel Speed (All Channels)
- Dual ESC Mixing
- 4WS Mixing
- Multi Position Switches
- Key Mapping
You can program any button to be whatever you want. It makes the Tx MUCH more powerful.
Here's a manual for the custom FW (v 0.6.1 is currently installed):
http://www.rctech.net/forum/radio-el...re-manual.html
Also 4 binding plugs and 3 antenna tubes.
Let me know if you have any questions!
SOLD
Last edited by lobuzz311; 11-25-2014 at 10:48 AM. Reason: SOLD