reedy mach2 13.5 and orca vx esc issue?
#1
reedy mach2 13.5 and orca vx esc issue?
does anybody here running this setup and have an issue with the motor or esc? thanks!
#2
Team EAM
iTrader: (79)
Not the answer your looking for but it has happened on a few occasions with no answer as to why or how.
EA
#3
#4
Team EAM
iTrader: (79)
Hey Sean,
On the ones Ive seen it acts as the sensor board is faulty but even swapping it out didnt help the issue. Different Reedy motors didnt fix it either. Only thing that did was swapping to a different brand speedo or a different orca speedo. It almost acts likes its a tolerance in the speedo itself. Ive only seen it on 3.
EA
On the ones Ive seen it acts as the sensor board is faulty but even swapping it out didnt help the issue. Different Reedy motors didnt fix it either. Only thing that did was swapping to a different brand speedo or a different orca speedo. It almost acts likes its a tolerance in the speedo itself. Ive only seen it on 3.
EA
#5
#6
I have heard from several people that have issues using the Reedy motor with the VX or VXX. I can not figure out why and neither has ORCA. As the motors that have had issues work perfect with other brands of speedo's when tested and any other motor works fine on their orca speedo...just not a reedy.
Not the answer your looking for but it has happened on a few occasions with no answer as to why or how.
EA
Not the answer your looking for but it has happened on a few occasions with no answer as to why or how.
EA
#7
i guess i have to purchase an orca motor then. if u guys have one for sale let me know. Thanks!
#10
thats right. its worth a try. I like reedy motors. hope im not gonna have some issues. thanks again for all the help. appreciate it.