CRC F1
#181
Tech Fanatic
iTrader: (4)
I ran the first two UF1 Midwest races at the Gate this past weekend. TQ and won all three mains on Saturday, and won two out of the three mains on Sunday. Hot lap and quickest averages every time on the track. I ran my standard setup, which is what comes in the box. Use all of the kit springs and 10k in the tubes. I also used the CRC Part#4185 F1 body. The car was on rails all weekend on the TCS tires which is what we will be using at IIC.
#182
Picked up a airtronics 94761z micro servo for my wtf1 now my question is what servo saver do I need ?
#184
#186
Tech Elite
Join Date: Dec 2005
Location: 5280 Raceway. Denver's finest RC facility
Posts: 4,780
yep. tan kimbrough. thats what is on mine.
#187
Tech Champion
iTrader: (22)
I ran the first two UF1 Midwest races at the Gate this past weekend. TQ and won all three mains on Saturday, and won two out of the three mains on Sunday. Hot lap and quickest averages every time on the track. I ran my standard setup, which is what comes in the box. Use all of the kit springs and 10k in the tubes. I also used the CRC Part#4185 F1 body. The car was on rails all weekend on the TCS tires which is what we will be using at IIC.
#189
Tech Adept
#191
Tech Adept
It looks to be Sy-Brand body.
#193
#194
About half way down the page
no image available though
https://www.teamcrc.com/crc/modules....category_id=29
no image available though
https://www.teamcrc.com/crc/modules....category_id=29