FS: Kyosho Double Dare/USA 1 (almost) roller
08-28-2013, 10:07 PM
#1
SOLD: Kyosho Double Dare/USA 1 (almost) roller
SOLD
I'm pretty sure it's a USA1 chassis because of the wider steering knuckle. It's runnable as-is but should be completed, IMO.
The Good:
It's sheer, unadulterated, old-school monster truck awesomeness.
4wd and 4ws
dual motors (Mega 360's)
converted to 12mm hex hubs
tires are in good shape
I have the original manual speed control if you want it. if not, I'll use it as a break-in control for my brushed motors.
all the plastics are in great shape, as are the gearboxes.
The Bad:
It's missing the tray cover for the chassis.
It's missing a wheel bearing
it's missing the gear cover on the front transmission
I would not buy this and throw a brushless system, it will probably tear up the gears (I'd also recommend cleaning and oiling the motors)
I would however, throw a bigger set of tires on it, a chassis brace and some 100k gear oil and have a blast with it.
or you could use it to do a IFS/IRS 1:6 scaler.(kinda, since it's MOA)
$50 shipped or $40 without the tires and wheels
yes, that's right! your own bonafide old-school legendary monster truck for one low price!
Shipping is now included in the price 9.2.13
I'm pretty sure it's a USA1 chassis because of the wider steering knuckle. It's runnable as-is but should be completed, IMO.
The Good:
It's sheer, unadulterated, old-school monster truck awesomeness.
4wd and 4ws
dual motors (Mega 360's)
converted to 12mm hex hubs
tires are in good shape
I have the original manual speed control if you want it. if not, I'll use it as a break-in control for my brushed motors.
all the plastics are in great shape, as are the gearboxes.
The Bad:
It's missing the tray cover for the chassis.
It's missing a wheel bearing
it's missing the gear cover on the front transmission
I would not buy this and throw a brushless system, it will probably tear up the gears (I'd also recommend cleaning and oiling the motors)
I would however, throw a bigger set of tires on it, a chassis brace and some 100k gear oil and have a blast with it.
or you could use it to do a IFS/IRS 1:6 scaler.(kinda, since it's MOA)
$50 shipped or $40 without the tires and wheels
yes, that's right! your own bonafide old-school legendary monster truck for one low price!
Shipping is now included in the price 9.2.13
Last edited by makya; 09-04-2013 at 10:08 AM.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
