Xray XB4 thread
Tech Apprentice
Final update: It was the esc that unbind itself for somereason... :/
Tech Master
iTrader: (40)
Time for a new esc bud
Tech Elite
iTrader: (128)
Came home with my first kit yesterday and now I just have to get the rest =) Looks like I'm going for Hobbywing combo 3.1/6.5T but transmitter...? Also interested of receiver with built in antenna, anyone with experience of this on outdoor track?
ttp://forumbilder.se/F9GL8/20160405-191959-1-1.jpg
It stands between MT-4S and EX-2, have dry tested MT-4 and it feels well balanced with solid button and knobs. Think neither about the grip = nothing special and my local dealer says it's the same as MT-4S.
The problem is that he dont have EX-2 in stock and I can't pre-test it... About every search I make the first thing that pop up is how nice the grip is on the EX-2.
I have euro size 10 hands, is the EX-2 amazing and better in some other way than the grip or is it the other way around?
ttp://forumbilder.se/F9GL8/20160405-191959-1-1.jpg
It stands between MT-4S and EX-2, have dry tested MT-4 and it feels well balanced with solid button and knobs. Think neither about the grip = nothing special and my local dealer says it's the same as MT-4S.
The problem is that he dont have EX-2 in stock and I can't pre-test it... About every search I make the first thing that pop up is how nice the grip is on the EX-2.
I have euro size 10 hands, is the EX-2 amazing and better in some other way than the grip or is it the other way around?
Tech Apprentice
Actually the esc was brand new. Today i figured out the problem was the "also brand new" sanwa receiver from MT-4 ..
After it failed again, i tried out my old spektrum dx3r with the receiver and the car worked fine after a lot of abuse...
I am gonna cry now because the sanwa receiver is worth 60-70 euros
After it failed again, i tried out my old spektrum dx3r with the receiver and the car worked fine after a lot of abuse...
I am gonna cry now because the sanwa receiver is worth 60-70 euros
Tech Master
iTrader: (40)
Time will tell. I had the prob your describing with a brand new viper esc motor combo i had. Sent it back . Got it back then flogged it.
Anyone with a 16 still have or run a 14 XB4 back to back for comparison as I have been very close to buying a 16, but can't bring myself to do it with how well my 14 is working. The saddle configuration seems to work well on the low/med bite dirt I run on and I'd hate to go backwards to run a new car.
I also invested heavily in spare parts for the 14 (1st Xray) buying more than I needed, but I'd rather hold out hope that I might use some of it rather than give 'em away in a fire sale.
Curious to see if anyone went back to saddle configuration with either the 14 or 15 XB4's after owning a 16?
I also invested heavily in spare parts for the 14 (1st Xray) buying more than I needed, but I'd rather hold out hope that I might use some of it rather than give 'em away in a fire sale.
Curious to see if anyone went back to saddle configuration with either the 14 or 15 XB4's after owning a 16?
Tech Elite
iTrader: (74)
14/16
Anyone with a 16 still have or run a 14 XB4 back to back for comparison as I have been very close to buying a 16, but can't bring myself to do it with how well my 14 is working. The saddle configuration seems to work well on the low/med bite dirt I run on and I'd hate to go backwards to run a new car.
I also invested heavily in spare parts for the 14 (1st Xray) buying more than I needed, but I'd rather hold out hope that I might use some of it rather than give 'em away in a fire sale.
Curious to see if anyone went back to saddle configuration with either the 14 or 15 XB4's after owning a 16?
I also invested heavily in spare parts for the 14 (1st Xray) buying more than I needed, but I'd rather hold out hope that I might use some of it rather than give 'em away in a fire sale.
Curious to see if anyone went back to saddle configuration with either the 14 or 15 XB4's after owning a 16?
Tech Elite
iTrader: (74)
how do u guys like the center gear diff ? i didn't get one "yet" but thinking of trying it.
Selling my 16 car with CD and ECS installed if anyone's interested.
Tech Adept
I own a XB4 '15 for 8 months now and its still running strong. Using a Central Diff and works perfectly on the low grip tracks here in Malaysia.
My only gripe with the XB4 is needing to spend USD23 on part#368030 to get 4 sets of plastic shims for the bottom shocks which frequently wear out. I see other manufacturers are selling the plastic shims together with the shock o-rings which I think make more sense.
Is there any alternative way to get these shims without needing to buy the whole piston tree ?
My only gripe with the XB4 is needing to spend USD23 on part#368030 to get 4 sets of plastic shims for the bottom shocks which frequently wear out. I see other manufacturers are selling the plastic shims together with the shock o-rings which I think make more sense.
Is there any alternative way to get these shims without needing to buy the whole piston tree ?
I own a XB4 '15 for 8 months now and its still running strong. Using a Central Diff and works perfectly on the low grip tracks here in Malaysia.
My only gripe with the XB4 is needing to spend USD23 on part#368030 to get 4 sets of plastic shims for the bottom shocks which frequently wear out. I see other manufacturers are selling the plastic shims together with the shock o-rings which I think make more sense.
Is there any alternative way to get these shims without needing to buy the whole piston tree ?
My only gripe with the XB4 is needing to spend USD23 on part#368030 to get 4 sets of plastic shims for the bottom shocks which frequently wear out. I see other manufacturers are selling the plastic shims together with the shock o-rings which I think make more sense.
Is there any alternative way to get these shims without needing to buy the whole piston tree ?
http://www.ebay.com/itm/POM-Shock-Sh...kAAOSw9N1VjMRr
Tech Rookie
Great Forum!!
I have my own XB4 and it's runs on rails!! Did I mention it Jumps and lands superb!
I have my own XB4 and it's runs on rails!! Did I mention it Jumps and lands superb!
Tech Adept
Just received a set of these. Measured against the stockers with calipers they are an exact fit. I asked Bentka why they don't sell these separate...he's been asking Xray that question for a long time with no answer yet.
http://www.ebay.com/itm/POM-Shock-Sh...kAAOSw9N1VjMRr
http://www.ebay.com/itm/POM-Shock-Sh...kAAOSw9N1VjMRr
Tech Addict
iTrader: (11)
Anyone know if a rear skid plate for an XB4 will fit (or even made to fit) an XB2?