Mugen MTX-4
10-21-2005, 12:32 AM
#1486
Originally Posted by litespeed-dom
ER bill for broken head from banging on the bench because your kit was missing shocks - $4000
Mugen USA support - PRICELESS
Dom
But that's why we in Europe can buy in Asia, we are all fully health ensured
Seriously now. German car makers have tried to refuse service and warranty to cars that where re-imported from other European countries, where the cars are cheaper. They didn't get very far with it.
In an open market, a company has to stand in for the quality of their product, no matter where the customer bought it.
IF I would buy a MTX4 in Asia and it would miss something major (not a few screws) I would get it through Mugen Europe, guaranteed!
10-21-2005, 02:28 AM
#1487
Tech Adept
hi stefan,
i think if you pay missing parts, you are right.
dieter
i think if you pay missing parts, you are right.
dieter
10-21-2005, 04:27 AM
#1488
Tech Initiate
Nice Ideas stefan...
Id like to say... Im waiting too... but there´s a big problem... Im from Brazil... And I m just gonna receive my car.. (that-s already payed lol) from Mugen USA... so It´s funny hear all the complains... about time ... bla bla bla.. try to imagine my feelings.. lol
ohhhh.. there´s a another point... Ive sold my mtx3.. .and the next race ( Regional Chamnpionship) is gonna be on next 13 .. .lol... Im in troubles..
btw... Id rather wait for the MTX4 than buy another cheaper car... like 710 the cheapest pro12 here in Brazil...
Patience Guys... PAtience...
A little bit of patience makes a man !!!!!
Id like to say... Im waiting too... but there´s a big problem... Im from Brazil... And I m just gonna receive my car.. (that-s already payed lol) from Mugen USA... so It´s funny hear all the complains... about time ... bla bla bla.. try to imagine my feelings.. lol
ohhhh.. there´s a another point... Ive sold my mtx3.. .and the next race ( Regional Chamnpionship) is gonna be on next 13 .. .lol... Im in troubles..
btw... Id rather wait for the MTX4 than buy another cheaper car... like 710 the cheapest pro12 here in Brazil...
Patience Guys... PAtience...
A little bit of patience makes a man !!!!!
10-21-2005, 04:47 AM
#1489
Can we start another MTX-4 thread? 
Leave this one for price discussion and the new one for the real stuff, like helping eachother, performance, setups, etc.
Don't you all agree that pretty much everything has been said about price, when it's going to be available, serial number, etc? I think a lot of people are getting fed up of this.
Let's turn this into something good...
Leave this one for price discussion and the new one for the real stuff, like helping eachother, performance, setups, etc.
Don't you all agree that pretty much everything has been said about price, when it's going to be available, serial number, etc? I think a lot of people are getting fed up of this.
Let's turn this into something good...
10-21-2005, 04:55 AM
#1490
Thanks for JDESOTO for the building tips. p2
keep up the good work man.. .
originally posted by JDESOTO
http://www.rollcenterproducts.com/Bu..._-_part_2.html
Here's the second in the series.
-Joaquin
Today 10:46 AM
http://www.rollcenterproducts.com/Bu..._-_part_2.html
Here's the second in the series.
-Joaquin
Today 10:46 AM
10-21-2005, 06:01 AM
#1491
Tech Initiate
Serpent 710 or Mugen MTX4?
Hello!
I NEED to know wich one is the best car between serpent 710 & mugen mtx4..please answer quickly, i need the answer today!
Thanks..
I NEED to know wich one is the best car between serpent 710 & mugen mtx4..please answer quickly, i need the answer today!
Thanks..
10-21-2005, 06:31 AM
#1493
Originally Posted by rcfoolz
And I motion for an end to the price issues, it isn't going to change, anybody else had enough and second it?
I'm here to read about the car and not the price. For those so bothered with the price then buy something else.
10-21-2005, 06:32 AM
#1494
Originally Posted by andream88
Hello!
I NEED to know wich one is the best car between serpent 710 & mugen mtx4..please answer quickly, i need the answer today!
Thanks..
I NEED to know wich one is the best car between serpent 710 & mugen mtx4..please answer quickly, i need the answer today!
Thanks..
10-21-2005, 06:41 AM
#1495
Tech Adept
Originally Posted by rcfoolz
only for myself, I cut a couple 3mm rear shock towers. pic is of both of them. I put super glue on the sides, thus its shiny. I didn't chamfer the mounting holes yet.
Why not 4mm, like the RRR? Just curious.
10-21-2005, 07:07 AM
#1496
Originally Posted by JustRace
Get the one that has parts available in your area. They're both good cars.
I agree with that.
10-21-2005, 07:52 AM
#1498
I didn't got to the 4mm yet for 2 reasons. Knowing the location of the carbon fibre and the width of the body mounts, if I went with the 4, the 2 screws that hold the shock tower/body mount on would probably stip with the leverage that the 4 would produce. The 3mm was almost 45% stronger and still had some flex. Also, I put another screw in the top of the rear bridge so I have 3 screw holes in the rear shock tower, the pic does not show that.
Thanks for the question
Thanks for the question
10-21-2005, 08:05 AM
#1499
Tech Initiate
I can buy a mtx4 for 299€!
And a serpent 710 for 400€, with 150€ of 3racing optional parts!
Tell me what to do plz..!
Someone told me that the 710 is too complicated to set up!
It's better a mtx4 or a mtx3 prospec?
it's better a mtx4 or a rrr?
Thanks..
And a serpent 710 for 400€, with 150€ of 3racing optional parts!
Tell me what to do plz..!
Someone told me that the 710 is too complicated to set up!
It's better a mtx4 or a mtx3 prospec?
it's better a mtx4 or a rrr?
Thanks..
Last edited by andream88; 10-21-2005 at 08:19 AM.
10-21-2005, 08:31 AM
#1500
just get a mtx-4 and be done with it 
it's the newest car out there
it's the newest car out there