RedBullFiXX

iTrader: (34)

experiment, and see what effect it has

1.5 gr is where I start...

G4ZZ4

iTrader: (9)

Lol yes! 😌

kobiwan

iTrader: (12)

I have the BD7 2015 Black Edition. I want to go to 2.5 rear toe. I know I need to change my rear/rear suspension mount and i have found the part on Amain but it is of the blue variety. Does any one know if/where they sell the same part in black?

LloydLoar

iTrader: (20)

http://banzaihobby.com/Yokomo-B7-3157B

AL1983

iTrader: (4)

Hi,
Try Banzaihobby!
http://banzaihobby.com/Yokomo-B7-3157B

WinDarK83

Hi guys
The 2015 diff fits on 2013??
Thanks

RedBullFiXX

iTrader: (34)

Yes sir

WinDarK83

Thanks !!!

Les

iTrader: (2)

All fixed

Lonestar

iTrader: (14)

I ran the car yesterday for a few packs with a brand new prev-gen diff, filled with 5K... after 8 packs, no leaks. The first few laps were definitely a handful, probably as it took a few efforts for all the internals to set in. But zero leak either on pulley or the outdrives side. I had soaked the paper gasket in moly grease, and sanded the diff half so it was perfectly flat. Looks like it paid off



Paul

CLovely

Will a 14 front gear diff fit a 15
Or does the 15 need two of its own?

Racing4Evo

iTrader: (2)

Diffs are interchangeable between all versions of the BD7 and the BD5.

LloydLoar

iTrader: (20)

FYI, I have a set of BD7 short shocks I am trying to sell:

http://www.rctech.net/forum/r-c-item...-w-towers.html

The included shock towers are for the BD7 2014, but the shocks would also work just fine on a BD7 2015 with the appropriate shock towers.

Lonestar

iTrader: (14)

the 14 diff drops right in the 15 rear bulkheads... don't see why the front would be any different...

Lonestar

iTrader: (14)

what is the single suspension geometry adjustment you found to have the biggest effect on the car's balance, guys?

Paul