Yokomo MR4TC-BD
#1411
R/C Tech Elite Member
iTrader: (47)
Originally posted by Matt Howard
Last week I ran the hardened front universals in my car and they worked fine. I did have to shave the end down slightly and take out the O ring from the oneway drive cup but I had no problems.
Last week I ran the hardened front universals in my car and they worked fine. I did have to shave the end down slightly and take out the O ring from the oneway drive cup but I had no problems.
#1412
Tech Champion
iTrader: (6)
Originally posted by Randy Caster
ok, I got the impression from your post they didnt work. Do you have the part # on hand, I'll need to include a few sets in my next order.
ok, I got the impression from your post they didnt work. Do you have the part # on hand, I'll need to include a few sets in my next order.
#1414
Originally posted by Rob Phillips
It's offical. I am the proud new owner of a BD.
You guys just starting with the stock setup for carpet? I may put in a diff in the front instead of the one way.
Steve, any word on when yokomo will have the locked center shaft/gear/pulley?
It's offical. I am the proud new owner of a BD.
You guys just starting with the stock setup for carpet? I may put in a diff in the front instead of the one way.
Steve, any word on when yokomo will have the locked center shaft/gear/pulley?
I'll have to check with Yokomo next week, they are getting a new shipment in and it suppose to contain a lot of the BD parts
Steve Wang
#1417
Hi Guys,
I'm sorry, I had to close my own thread and open it up only to post new product arrivals because there were too many people with inquiry about emails and orders, but not leaving me enough information to look it up. So the thread just ended up with a lot of inquiries back and forth and not really about what's new at Speed Tech R/C
Steve Wang
I'm sorry, I had to close my own thread and open it up only to post new product arrivals because there were too many people with inquiry about emails and orders, but not leaving me enough information to look it up. So the thread just ended up with a lot of inquiries back and forth and not really about what's new at Speed Tech R/C
Steve Wang
#1419
I'd like to change my screen name too. Wonder if Shane'll change it for me? Needs to be Jimmy Mac
Anyways, I edited my carpet setup. My shocks were 60mm... not 61mm.
Anyways, I edited my carpet setup. My shocks were 60mm... not 61mm.
#1423
Tech Master
iTrader: (63)
sway bays
Randy or Rocketron or Matt or anyone:
anybody know the part numbers for the optional (front & rear) sway bars??????
also, would the "aluminum fan mount" for the SD work on the BD
last,
anybody know a good "final drive ratio" for "Stock Touring" for Scotts track in Hesperia?????
thanks in advanced,
the only BD owner in Vegas.......
anybody know the part numbers for the optional (front & rear) sway bars??????
also, would the "aluminum fan mount" for the SD work on the BD
last,
anybody know a good "final drive ratio" for "Stock Touring" for Scotts track in Hesperia?????
thanks in advanced,
the only BD owner in Vegas.......
#1424
Tech Champion
iTrader: (6)
Re: sway bays
Originally posted by ghoppa
Randy or Rocketron or Matt or anyone:
anybody know the part numbers for the optional (front & rear) sway bars??????
also, would the "aluminum fan mount" for the SD work on the BD
last,
anybody know a good "final drive ratio" for "Stock Touring" for Scotts track in Hesperia?????
thanks in advanced,
the only BD owner in Vegas.......
Randy or Rocketron or Matt or anyone:
anybody know the part numbers for the optional (front & rear) sway bars??????
also, would the "aluminum fan mount" for the SD work on the BD
last,
anybody know a good "final drive ratio" for "Stock Touring" for Scotts track in Hesperia?????
thanks in advanced,
the only BD owner in Vegas.......