Big Selloff
#1
Big Selloff
sc10 roller A - 150$ shipped
sc10 roller B - 160$ shipped
B4.1 roller(+8mm) - 150$ shipped
all factory team kits.
rollers include manual, 1 body(your choice) , spring kits, toe blocks, dialed inc bags, one set of tires (your choice below) (buggy has lots of extra wings)
tires are 8$ per pair + shipping. (unless noted otherwise)
b4 tires as follows
JC barcodes front and rear super soft good condition
PL Scrubs front clay compound good condition - SOLD
PL Suburb Rear Clay compound good condition - SOLD
PL slicer front soft compound good condition
AKA rebar front and rear soft compound front new rear medium wear (6$ for rears)
panther switch 2.0 rear new
PL hole shot rear m3 good condition.
rulux rear rims 3$
rear inserts 1$ per pair
Sc10tires as follows
JC Subcultures rear super soft new condition
PL Suburbs Front and rear super soft medium wear(5$ per pair)
PL suburbs Front and Rear clay compound new
team associated stock Front and rear new
AKA rebar front and rear soft front used rear almost bald(2$ for bald ones)
AKA rebar front and rear soft all new
panther switch 2.0 rear new
PL holeshot rear soft two pairs new
AKA grid iron rear soft new
associated rear rims 2$ - SOLD
Protek 2s 5000mah 65c - 18$ shipped - SOLD
OFNA car stands 5$ each - SOLD
Shock rebuild rack 2$ - SOLD
RC Screws KIT SC10 - 5$
Sticky Kits Red - 4$ - SOLD
AKA Tire Glue -3$ - SOLD
RPM Camber Gauge W/ Associated Wrench - 4$
Factory Team Ride Height -10$
shock oil rack w/ oils - 10$ - SOLD
Parts trays has mostly interchangeable parts. 25$ for both trays
I want to combine shipping on as much stuff as possible so please check my other posts as well.
Photo's at
http://s83.photobucket.com/albums/j3...20car%20stuff/
RC tech limits me to 5 photo's and we need more
sc10 roller B - 160$ shipped
B4.1 roller(+8mm) - 150$ shipped
all factory team kits.
rollers include manual, 1 body(your choice) , spring kits, toe blocks, dialed inc bags, one set of tires (your choice below) (buggy has lots of extra wings)
tires are 8$ per pair + shipping. (unless noted otherwise)
b4 tires as follows
JC barcodes front and rear super soft good condition
PL Scrubs front clay compound good condition - SOLD
PL Suburb Rear Clay compound good condition - SOLD
PL slicer front soft compound good condition
AKA rebar front and rear soft compound front new rear medium wear (6$ for rears)
panther switch 2.0 rear new
PL hole shot rear m3 good condition.
rulux rear rims 3$
rear inserts 1$ per pair
Sc10tires as follows
JC Subcultures rear super soft new condition
PL Suburbs Front and rear super soft medium wear(5$ per pair)
PL suburbs Front and Rear clay compound new
team associated stock Front and rear new
AKA rebar front and rear soft front used rear almost bald(2$ for bald ones)
AKA rebar front and rear soft all new
panther switch 2.0 rear new
PL holeshot rear soft two pairs new
AKA grid iron rear soft new
associated rear rims 2$ - SOLD
Protek 2s 5000mah 65c - 18$ shipped - SOLD
OFNA car stands 5$ each - SOLD
Shock rebuild rack 2$ - SOLD
RC Screws KIT SC10 - 5$
Sticky Kits Red - 4$ - SOLD
AKA Tire Glue -3$ - SOLD
RPM Camber Gauge W/ Associated Wrench - 4$
Factory Team Ride Height -10$
shock oil rack w/ oils - 10$ - SOLD
Parts trays has mostly interchangeable parts. 25$ for both trays
I want to combine shipping on as much stuff as possible so please check my other posts as well.
Photo's at
http://s83.photobucket.com/albums/j3...20car%20stuff/
RC tech limits me to 5 photo's and we need more
Last edited by TrevJonez; 05-27-2012 at 09:36 AM.
#2
Pictures
Protek 2s 5000mah 65c - 18$ shipped
OFNA car stands 5$ each
Shock rebuild rack 2$
Sticky Kits Red - 4$
AKA Tire Glue -3$
RPM Camber Gauge W/ Associated Wrench - 4$
Factory Team Ride Height -10$
shock oil rack w/ oils - 10$
Got Pictures??? I'll PM you with E-Mail.
OFNA car stands 5$ each
Shock rebuild rack 2$
Sticky Kits Red - 4$
AKA Tire Glue -3$
RPM Camber Gauge W/ Associated Wrench - 4$
Factory Team Ride Height -10$
shock oil rack w/ oils - 10$
Got Pictures??? I'll PM you with E-Mail.
#5
Pm sent
#6
pm'ed
#7
roller prices reduced
#8
I sent you a pm no reply I want the Camber gauge and wrench
#9
Tech Rookie
pics? of rollers and whats the diff
#10
PM sent