Spintec Battery Manager
#886
Originally Posted by MBreve
#887
Tech Master
I know this isn't the best question... but will we be able to upgrade the first version for the BM for a lesser price than buying a new one?
#888
Tech Adept
Yeti,
I had no trouble whatsoever reading the screen on the BatMan V2 in the bright sun of the worlds in Italy. The contrast is very good as you can see on the picture Victor posted.
The only 'drawback' is you don't see the red backlight
Upgrade? Well, I guess you could tear your 'old' BatMan apart and use the heatsink and wires to save about $5.
I had no trouble whatsoever reading the screen on the BatMan V2 in the bright sun of the worlds in Italy. The contrast is very good as you can see on the picture Victor posted.
The only 'drawback' is you don't see the red backlight
Upgrade? Well, I guess you could tear your 'old' BatMan apart and use the heatsink and wires to save about $5.
#890
Okay guys hot of the Press from Spintec today:
4,5,6,7,8 cell discharging
10 or 35 Amp Coolflex discharging
0.8 - 1.1 volt cut off
micro, receiver and transmitter pack discharging
Clear, red backlight, 3 lines screen
IB4200 discharge support
Expected to be released in August 2006 (NL i guess)
Price ..................?
For more info look at www.rcnews.nl
Marc
4,5,6,7,8 cell discharging
10 or 35 Amp Coolflex discharging
0.8 - 1.1 volt cut off
micro, receiver and transmitter pack discharging
Clear, red backlight, 3 lines screen
IB4200 discharge support
Expected to be released in August 2006 (NL i guess)
Price ..................?
For more info look at www.rcnews.nl
Marc
#891
For all you who also want to know the price (in euro's). The new Battery Manager will go for 79 euro's Retail.
#892
Looking at the specs of the new BM, does it mean the previous BM is not suitable for 4200's?
#893
Tech Adept
Originally Posted by psychosilence
Looking at the specs of the new BM, does it mean the previous BM is not suitable for 4200's?
But some new features have been added (not mentioned in TDO's post) where you can select different settings to suit your preference for your type of battery or discharge style.
Prototypes didn't have this enabled at the time of the worlds but will be so in the new release.
(look at the CC setting on the right of the 3rd line)
#894
Thanks for that! Almost thought my BM is redundant
#895
#896
#897
#898
Originally Posted by Erik Jonk
#899
Team EAM
iTrader: (79)
Got my V2 Spintec discharger today. Very nice. Same size as previous one but the LCD screen is dialed!! Red backlight and easy to read. 3 different types of discharge, 4-8 cells, 10 or 35 amps....Everything that guys complained about with the first one have been fixed plus some!! I'll be putting it through the EAM testing phase all this week and will report my findings....Which Im sure will be good
EA
EA