Lab C-02
#151
Tech Elite
High guys,
I had a few racers ask for my set up from this past weekend at the Airtronic's Race. If you have any questions or if i missed anything, just ask here and I will do my best to help. I had a pretty good car with a little bit of a push going in. If you like that then this is a good set up. If you like more turn in, you can try a softer from diff oil.
DJ Apolaro
I had a few racers ask for my set up from this past weekend at the Airtronic's Race. If you have any questions or if i missed anything, just ask here and I will do my best to help. I had a pretty good car with a little bit of a push going in. If you like that then this is a good set up. If you like more turn in, you can try a softer from diff oil.
DJ Apolaro
#152
BLACKEDOUT C02! WC
Had all my red anode black, looks like a xray now, but meaner! love the shocks, my favorite part!
#153
Black c02
1more
#154
1more
#155
Car looks really good. Can you run the throttle servo under the radio tray and flip the linkages to the top side of the servo arm? Would probably need some spacers to mount the servo so that the flange on the servo mounts clear the radio tray.
#156
Thanks, Eventually I'm going to stop being lazy and drop the throttle servo down, only reason I haven't done it is, I made a small mod that's attached to the side of the steering servo mount to keep the wires neat, that mod is in the way of me mounting the throttle under the deck, The flange ill just trim off with a exacto!
#157
#158
Thanks, What up Niko, thanks again for the C02 wc got it done at a place here in Hayward CA. (Electro plating Specialties)...... run you around $65 just wanted to b a little different cause I race with 6 or so guys that have the Capricorn
#159
Tech Elite
iTrader: (13)
Join Date: Feb 2007
Location: Landsborough, Queensland, Australia.
Posts: 2,142
Trader Rating: 13 (100%+)
Thanks, Eventually I'm going to stop being lazy and drop the throttle servo down, only reason I haven't done it is, I made a small mod that's attached to the side of the steering servo mount to keep the wires neat, that mod is in the way of me mounting the throttle under the deck, The flange ill just trim off with a exacto!
Kindest regards,
Lars.
#160
oh no not laying servo down, just placing under the upperdeck
#161
Tech Elite
iTrader: (13)
Join Date: Feb 2007
Location: Landsborough, Queensland, Australia.
Posts: 2,142
Trader Rating: 13 (100%+)
#162
That's what I meant by putting the servo under the Upperdeck! Everyone does it if u run low profile throttle servo
#163
Closer shot
#165