X12 rotor
#1
X12 rotor
Hi all,
Have a stockspec X12 13.5 motor that let go last race meeting.
After pulling it apart I found that the magnet has come loose off the rotor shaft, nothing smashed though, it's still all in one piece,Can the magnet just be glued back in place in some way or do I just get another rotor
Thanks Lee
Have a stockspec X12 13.5 motor that let go last race meeting.
After pulling it apart I found that the magnet has come loose off the rotor shaft, nothing smashed though, it's still all in one piece,Can the magnet just be glued back in place in some way or do I just get another rotor
Thanks Lee
#2
I know a couple of people who have re-glued their rotors but I'm afraid I don't know what glue they used.
Skiddins
Skiddins
#3
Tech Fanatic
this is becoming quite common now, maybe we should get back to LRP about this recurring problem.
Anyone from LRP on this forum?
otherwise, epoxy resin will be ok to glue it back
Anyone from LRP on this forum?
otherwise, epoxy resin will be ok to glue it back
#4
Had exactly the same issue today.
Another guy at the track said they can be superglued back together, so may give it a try.
Another guy at the track said they can be superglued back together, so may give it a try.