Jammin X1 - so close yet so far
08-16-2006, 12:12 AM
#2431
Originally Posted by arghh
nope.. very sadly at last he choose err.. err.. all alloy bullet proof part.. worrying dnf..teheheh 
what brand is that arghhh
i cant escape. sponsorship comes from everywhere. got to go with the one no one has here yet ... the teammate of my truggy.
08-16-2006, 01:58 AM
#2432
Originally Posted by jfc_tech
teammate of my truggy.
08-16-2006, 06:15 PM
#2434
Originally Posted by macnkitty2002
buggy or what?
08-16-2006, 11:20 PM
#2437
Originally Posted by jfc_tech
confirmed i got the X1CR Pro with STS 21B Turbo. especially the no e-clip hinge pin. cool. 
08-16-2006, 11:28 PM
#2438
Originally Posted by arghh
pro kit still use e-clip.. maybe yours one is FTE one.. does it come with 5mm shock tower, alloy front lower arm holder, carbon disc brake, one piece engine mounting..
normal engine mounting, 4.5mm tower(sukat pakai pembaris biasa),no big bore shocks, the brake is the pro one(slotted metal) not fiber disc as my truggy and all suspension arm mounts cnc alloy with 3deg at rear. i posted picture later.
08-17-2006, 07:40 AM
#2439
its mix match buggy. Pro plus FTE.
normal engine mounting, 4.5mm tower(sukat pakai pembaris biasa),no big bore shocks, the brake is the pro one(slotted metal) not fiber disc as my truggy and all suspension arm mounts cnc alloy with 3deg at rear. i posted picture later.
normal engine mounting, 4.5mm tower(sukat pakai pembaris biasa),no big bore shocks, the brake is the pro one(slotted metal) not fiber disc as my truggy and all suspension arm mounts cnc alloy with 3deg at rear. i posted picture later.
08-17-2006, 02:23 PM
#2440
Mac in Australia we get a different version again to most other places.
We get the one piece engine mount and a Hong Nor Eureka 2027 one piece pipe standard as well as the threaded hinge pins, big bore shocks, fibre brakes etc.
This pipe is one of the best on the market too and the developer here in Australia has just released a new version, the Eureka 2047 which is a 3 chamber and has a stinger support like the JP 1, 2 & 3 pipes.
You gotta love it.
We get the one piece engine mount and a Hong Nor Eureka 2027 one piece pipe standard as well as the threaded hinge pins, big bore shocks, fibre brakes etc.
This pipe is one of the best on the market too and the developer here in Australia has just released a new version, the Eureka 2047 which is a 3 chamber and has a stinger support like the JP 1, 2 & 3 pipes.
You gotta love it.
08-17-2006, 08:38 PM
#2441
Originally Posted by macnkitty2002
that's strange, is it just something you get in Asia?
here, our FTE edition come with 5mm shock tower, carbon disc brake, captured hinge pin, alloy "B" block and bigbore shock and i think it same as yours one..
08-18-2006, 04:00 AM
#2442
X1-CR Editions
Between the Pro and FTE kits we had a "Malang Edition" in Australia.
It was the first with the fully milled chassis but it didn't have the big bore shocks and the fibre brakes but had captured hinge pins, mono block engine mount and Eureka EFRA 2027 Pipe.
That's what mine was until i put a set of Big Bores on it, upper and lower B Blocks and some Cradok Brakes and the heavier sway bars front and rear.
I just got the new Hong Nor alloy rear Uprights and they are sweet!
Got them on the CRT first and putting them onto my CR this weekend.
They are one nice piece of work hey.
Has anyone tried the new alloy centre diff mount yet?
It's supposed to be awesome and the new brake set up is a lot better too.
It was the first with the fully milled chassis but it didn't have the big bore shocks and the fibre brakes but had captured hinge pins, mono block engine mount and Eureka EFRA 2027 Pipe.
That's what mine was until i put a set of Big Bores on it, upper and lower B Blocks and some Cradok Brakes and the heavier sway bars front and rear.
I just got the new Hong Nor alloy rear Uprights and they are sweet!
Got them on the CRT first and putting them onto my CR this weekend.
They are one nice piece of work hey.
Has anyone tried the new alloy centre diff mount yet?
It's supposed to be awesome and the new brake set up is a lot better too.
08-18-2006, 06:44 PM
#2444
yea... i noticed my chassis is also milled.
i put my CRT big bore to the CR for the Borneo race.in fact, since i dont have enough servos right now, i take the receiver boxes & servos from the CRT onto the CR. nice.
and yes mac, special edtion to mine. im partly sponsored actually.
i put my CRT big bore to the CR for the Borneo race.in fact, since i dont have enough servos right now, i take the receiver boxes & servos from the CRT onto the CR. nice.
and yes mac, special edtion to mine. im partly sponsored actually.