Team Losi JRXS
#3916
My LHS told me today I should have it next Thursday or Friday. I'm still not too worried about it since I may not have time to put it together much less get the body painted. I may just hold out and see how other set theirs up and wait till they have it dialed. I have a dialed XXXS that I can always fall back on if I can't get a setup on the JRXS. Still happy it will be in my hands sometime next week!!!
#3917
Tech Elite
iTrader: (15)
You know what will be funny...... After waiting this long, another day or so isn't going to matter to anyone because there's no big races and the outdoor season isn't going anywhere soon. But how many of us are going to have the car OVERNIGHTED WITH SATURDAY DELIVERY??????? haha I know my kit is going special express mail hand delivered by the post master general's mother in-law cost no option bow down at my feet and hand over the touring car to end all touring cars right now or die by my spectrums antennae you commie scum!
#3918
Originally posted by Greg Sharpe
You know what will be funny...... After waiting this long, another day or so isn't going to matter to anyone because there's no big races and the outdoor season isn't going anywhere soon. But how many of us are going to have the car OVERNIGHTED WITH SATURDAY DELIVERY??????? haha I know my kit is going special express mail hand delivered by the post master general's mother in-law cost no option bow down at my feet and hand over the touring car to end all touring cars right now or die by my spectrums antennae you commie scum!
You know what will be funny...... After waiting this long, another day or so isn't going to matter to anyone because there's no big races and the outdoor season isn't going anywhere soon. But how many of us are going to have the car OVERNIGHTED WITH SATURDAY DELIVERY??????? haha I know my kit is going special express mail hand delivered by the post master general's mother in-law cost no option bow down at my feet and hand over the touring car to end all touring cars right now or die by my spectrums antennae you commie scum!
Well said!!
Brant
#3919
Yeti, are you racing at the drags or spectating.. I'm heading out Wednesday.
#3920
Would love to be racin but my azz will be sittin in the stands with everyone else watchin. I am flyin into town on Thursday and hopefully going to catch some of the gas sedan racin going on at the Silver something or other football stadium parking lot.
#3921
The Evicerator
Stay strong guys... only a little while longer!
#3922
Stock set up - carpet/foam
Front:
kit pistons - 60 wt Losi oil - 60lb spring - 2 o-rings - middle hole on tower - camber link in lowest position - 4 degree caster blocks - arms flat on chassis - low roll center - 1mm up travel from ride height (4mm) - no sway bars - wheel base in middle - 1 degree arm sweep - 1.5 neg camber - downstops set 1mm before chassis hits bottom - Parma Cyan
Rear:
kit pistons - 40 wt. Losi oil - 25lb spring - 1 o-ring - out on tower and out on arm - camber link inside on hub and inside middle on tower - 1 degree rear toe - 0 degree off set hubs - wheel base in middle - 2mm up travel from ride height (4.25mm) - downstops set 1mm before chassis hits bottom - Parma Magenta - 1.5 neg camber - sway bar if more steering is needed - low roll center raised .030
I think this is everything. I am doing this from memory while sitting at work This should be a good starting point..
kit pistons - 60 wt Losi oil - 60lb spring - 2 o-rings - middle hole on tower - camber link in lowest position - 4 degree caster blocks - arms flat on chassis - low roll center - 1mm up travel from ride height (4mm) - no sway bars - wheel base in middle - 1 degree arm sweep - 1.5 neg camber - downstops set 1mm before chassis hits bottom - Parma Cyan
Rear:
kit pistons - 40 wt. Losi oil - 25lb spring - 1 o-ring - out on tower and out on arm - camber link inside on hub and inside middle on tower - 1 degree rear toe - 0 degree off set hubs - wheel base in middle - 2mm up travel from ride height (4.25mm) - downstops set 1mm before chassis hits bottom - Parma Magenta - 1.5 neg camber - sway bar if more steering is needed - low roll center raised .030
I think this is everything. I am doing this from memory while sitting at work This should be a good starting point..
#3923
Originally posted by Evicerator
Stay strong guys... only a little while longer!
Stay strong guys... only a little while longer!
#3924
Originally posted by STAN STICKLER
Now I just need to sell one of my kidneys for like 350 bucks,any takers?
Now I just need to sell one of my kidneys for like 350 bucks,any takers?
#3925
TTT
#3927
Originally posted by Windsorguy99
in here does :
TTT = is iT ouT yeT
in here does :
TTT = is iT ouT yeT
stomp..stomp..WELL--Is It Out Yet? LMAO
Brant
#3929
Originally posted by POOKYT
stomp..stomp..WELL--Is It Out Yet? LMAO
Brant
stomp..stomp..WELL--Is It Out Yet? LMAO
Brant