Kyosho v-one rrr
06-21-2005, 09:24 AM
#3076
Originally Posted by kidDynomite
Jeffrey, I take it that they're a little more $ than the V-one PB's, but a lot less than Kyosho Ti PB's. Thanks for the info. I'll check with RC Champs to see if they have both of them.
06-21-2005, 09:54 AM
#3077
Tech Fanatic
Originally Posted by NiMo
VSW007
This will give the rear drive shafts a 2mm offset so you can run 0mm offset wheels.
I've done it to mine.
This will give the rear drive shafts a 2mm offset so you can run 0mm offset wheels.
I've done it to mine.
06-21-2005, 09:55 AM
#3078
Originally Posted by joemugen
the vsw007 is the little silver bushings, right?
06-21-2005, 09:57 AM
#3079
Tech Fanatic
Originally Posted by jeffreylin
No it's the entire rear universal with the silver bushing included.
06-21-2005, 10:09 AM
#3080
Originally Posted by joemugen
ah, ok. well what i did was buy the dog bones from the regular rrr and the cups that go into the uprights (they come with the small bushings). i think that will work too right?
06-21-2005, 10:12 AM
#3081
Tech Fanatic
Originally Posted by jeffreylin
I suppose. I just get the whole set from Japan. It's not too bad at about $26 a set.
06-21-2005, 02:18 PM
#3082
Nimo.......
I was running dog bones in the front today and they popped out twice .......was thinking of uni's in front but since i moved to diff's in the front.....was wondering will the vsw007's work in the front also.
I was running dog bones in the front today and they popped out twice .......was thinking of uni's in front but since i moved to diff's in the front.....was wondering will the vsw007's work in the front also.
06-21-2005, 10:09 PM
#3083
Everyone finding the Kyosho Parts they need ok?
06-21-2005, 10:38 PM
#3084
Originally Posted by Gearhead3
Everyone finding the Kyosho Parts they need ok?
(I have a T5, but I think it is too fast for me. I need one that would last longer since I am still in practice mode)
06-21-2005, 10:45 PM
#3085
CLICK HERE FOR THE MAP DEALERS This map gets updated every two weeks or so. Shoot me a PM of where you Live, I will try to find a shop close to you if there is not one on the map. Also Try Ultimate hobbies in Orange, CA. They do mail order, but you have to call them, there web site is for the birds.
06-21-2005, 10:48 PM
#3086
Originally Posted by Gearhead3
Everyone finding the Kyosho Parts they need ok?
06-21-2005, 11:01 PM
#3087
I would recomend supporting your LHS before Going to Kyosho direct, Even though they only sell Parts direct, it is allways best to get parts from your LHS.
06-22-2005, 04:31 AM
#3088
Originally Posted by uaerc
Nimo.......
I was running dog bones in the front today and they popped out twice .......was thinking of uni's in front but since i moved to diff's in the front.....was wondering will the vsw007's work in the front also.
I was running dog bones in the front today and they popped out twice .......was thinking of uni's in front but since i moved to diff's in the front.....was wondering will the vsw007's work in the front also.
Same length shafts but 0mm offset wheel shaft.
06-22-2005, 05:29 AM
#3089
Tech Fanatic
Originally Posted by silverM3
any suggestions? I tried to order from rc champ, but I just found their price ok. Their discount price is good. But, after extra paypal charge + extra 4% charge + shipping to USA, it adds up more than US shops. I tried to buy a OS .12 TZ(P) T3 from them. After adding up all the fees, it becomes not so good deal !!! I can find better deals in US.
(I have a T5, but I think it is too fast for me. I need one that would last longer since I am still in practice mode)
(I have a T5, but I think it is too fast for me. I need one that would last longer since I am still in practice mode)
06-22-2005, 05:31 AM
#3090
Tech Adept
Hi, someone mentioned titanium Drivshafts made by east racing?
I cant find their website.
Does anyone have it?
Thanks
I cant find their website.
Does anyone have it?
Thanks