What's new @ Speed Tech R/C
#166
Hi Guys,
We are finally getting some Integy Alignment stations back in stock. They will be available for shipping today. Also, their six piece Ti-nitride hex wrench sets are also back in stock. Please check out the special tools page!
Thanks
Steve Wang
Speed Tech R/C
www.speedtechrc.com
We are finally getting some Integy Alignment stations back in stock. They will be available for shipping today. Also, their six piece Ti-nitride hex wrench sets are also back in stock. Please check out the special tools page!
Thanks
Steve Wang
Speed Tech R/C
www.speedtechrc.com
#167
Hey Steve, question for ya. Why is it that your Integy GP33004 costs $58.99 when the Integy themselves sell them for only $49.99?? Same stock number. Usually I see you sell Integy at a cheaper price than their website, but in the case of these batteries you don't. Just curious. Anyhow, it's about time you got the setup stations in! Been wanting to order them for some time now. Almost went to Integy to get them! You goin to Cleveland?
Jimmy Mac
Jimmy Mac
#168
Kilruf,
Thanks for catching my mistake. Those are actually the top of the line GP33006 from Integy (I got the part number wrong) which integy sells them for $59.99. I'll change it over today.
Thanks again! Cleveland is a little bit too far for me
Steve Wang
Speed Tech R/C
www.speedtechrc.com
Thanks for catching my mistake. Those are actually the top of the line GP33006 from Integy (I got the part number wrong) which integy sells them for $59.99. I'll change it over today.
Thanks again! Cleveland is a little bit too far for me
Steve Wang
Speed Tech R/C
www.speedtechrc.com
#169
Integy Gp3300
Have you gotten any of the integy gp3300 with the average v to 1.22. I just pickup up 1 pack and was looking for some more.
#170
Sweet! That was the only thing holding me back from ordering them. If there's anymore in stock, I'll have to place an order. Thanks!
Jimmy Mac
Jimmy Mac
#171
Tech Champion
iTrader: (32)
Re: Integy Gp3300
Originally posted by theisgroup
Have you gotten any of the integy gp3300 with the average v to 1.22. I just pickup up 1 pack and was looking for some more.
Have you gotten any of the integy gp3300 with the average v to 1.22. I just pickup up 1 pack and was looking for some more.
#172
Hi Guys,
We got some of the new Trinity Monster Horsepower stock motors in and they are going fast!!! Also in stock are more titanium racing parts and Cross F201 parts. The F201 quickly becoming a popular class, with handling characteristics of sedan and looks of F1, this class is a lot of FUN
And don't forget, the Integy alignment stations are back in stock, this item is a must have for all racers.
Have a good weekend guys!
Steve Wang
Speed Tech R/C
www.speedtechrc.com
We got some of the new Trinity Monster Horsepower stock motors in and they are going fast!!! Also in stock are more titanium racing parts and Cross F201 parts. The F201 quickly becoming a popular class, with handling characteristics of sedan and looks of F1, this class is a lot of FUN
And don't forget, the Integy alignment stations are back in stock, this item is a must have for all racers.
Have a good weekend guys!
Steve Wang
Speed Tech R/C
www.speedtechrc.com
#173
hey steve wang. trying finally to get the rclab going. a few questions for ya.
first; do you have any super thin shims for metric axles? 5mm maybe? i'm talking .003-.005 thick. i need desperately to take out all of the slop on this car.
second; do you have instock any aluum wheel hexes that are comparable to the thicker rclab molded ones?
third; i'm interested in a bunch of yokomo springs. do you know the rates? i want them between 15 and 25 lb/in. i think most of these will come from the gt4.
i'll probably call you about this. let me know. later, seaball.
oh, do you have the 2 degree aluminum hubs in for the lab?
first; do you have any super thin shims for metric axles? 5mm maybe? i'm talking .003-.005 thick. i need desperately to take out all of the slop on this car.
second; do you have instock any aluum wheel hexes that are comparable to the thicker rclab molded ones?
third; i'm interested in a bunch of yokomo springs. do you know the rates? i want them between 15 and 25 lb/in. i think most of these will come from the gt4.
i'll probably call you about this. let me know. later, seaball.
oh, do you have the 2 degree aluminum hubs in for the lab?
#174
Hi Guys,
Here's what's new at Speed Tech R/C:
* RD Logics Light Weight NTC3 chassis are in stock (Limited colors)
* Jaco Nitro Shoes Foam tires are in stock (26mm, 30mm, and 30mm +2)
* Sorex 36R touring car tires are back in stock!
* K-Factory Hop-ups for Nitro TC3 are now in stock.
* Kawahara Micro Centax clutch for V1R are in stock
seaball,
I don't think I have the shimes you're looking for. As for aluminum hex hubs, the Yokomo clamp hubs for the MR-4TC will work. I don't know the spring rate on the Yokomo springs, sorry about that And lastly, I believe we do have the 2 degree aluminum hubs in stock right now.
Thanks
Steve Wang
Speed Tech R/C
www.speedtechrc.com
Here's what's new at Speed Tech R/C:
* RD Logics Light Weight NTC3 chassis are in stock (Limited colors)
* Jaco Nitro Shoes Foam tires are in stock (26mm, 30mm, and 30mm +2)
* Sorex 36R touring car tires are back in stock!
* K-Factory Hop-ups for Nitro TC3 are now in stock.
* Kawahara Micro Centax clutch for V1R are in stock
seaball,
I don't think I have the shimes you're looking for. As for aluminum hex hubs, the Yokomo clamp hubs for the MR-4TC will work. I don't know the spring rate on the Yokomo springs, sorry about that And lastly, I believe we do have the 2 degree aluminum hubs in stock right now.
Thanks
Steve Wang
Speed Tech R/C
www.speedtechrc.com
#175
Hi Guys,
As promised we got the Yokomo YRX-12 parts online. The parts listed are the parts available from Yokomo and not AE. The parts not listed should be parts interchangeable with the RC12L and are available from Associated. There are more parts, but not yet available for the YRX-12. The next shipment of car kits is 2-3 weeks away and those of you on the waiting list, please be patient
Also In stock:
Integy new 16x5 v6 charger is available
Keyence Zero V-Extreme 2002 speed control is in stock
Thanks
Steve Wang
Speed Tech R/C
www.speedtechrc.com
As promised we got the Yokomo YRX-12 parts online. The parts listed are the parts available from Yokomo and not AE. The parts not listed should be parts interchangeable with the RC12L and are available from Associated. There are more parts, but not yet available for the YRX-12. The next shipment of car kits is 2-3 weeks away and those of you on the waiting list, please be patient
Also In stock:
Integy new 16x5 v6 charger is available
Keyence Zero V-Extreme 2002 speed control is in stock
Thanks
Steve Wang
Speed Tech R/C
www.speedtechrc.com
#176
Tech Initiate
How much for the Zero V Extreme 2002 and how much would postage and packaging be to Australia?
#177
ecenshu,
It will be around $32.99 to ship to Australia.
Thanks
Steve Wang
Speed Tech R/C
www.speedtechrc.com
It will be around $32.99 to ship to Australia.
Thanks
Steve Wang
Speed Tech R/C
www.speedtechrc.com
#178
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
Steve do you have any of those Yokomo ZS-007 Ball studs that the Yokomo drivers are using? No one seems to be able to get those. If you have some I would like 2 packs. I will check back later and if you do I will call to give you the info you need.
Thanks
Brian
Thanks
Brian
#179
Brian,
I had more than one person ask about that part, and if I remember correctly when I checked with Yokomo USA, they said there was no such part number
I will give them a call again and check, I'll let you know what I find out.
Steve Wang
Speed Tech R/C
www.speedtechrc.com
I had more than one person ask about that part, and if I remember correctly when I checked with Yokomo USA, they said there was no such part number
I will give them a call again and check, I'll let you know what I find out.
Steve Wang
Speed Tech R/C
www.speedtechrc.com
#180
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
Thanks Steve.....I heard they were going to re release that part. I guess Chris Tossilini, Masami, and Baker have used this modification on their cars.
Thanks
Brian
Thanks
Brian