4LikesReflex Suspension Dynamics (RSD) TC6 Upgrades (vertical ball studs, pistons,etc)
04-07-2012, 01:14 PM
#841
Why? Because of space restrictions. In order to make the chassis narrower, and use double bellcranks, the battery system must be done this way. There just is no space to use the TC6 system. Personally, I prefer this method thought. Our system will allow you to adjust the battery cradle to fit slightly wider or narrower batteries by sliding the battery braces in or out.
Until you don't hold our chassis in your hands you won't understand how narrow it is. It is only 82mm wide, the TC6 is 96.
Until you don't hold our chassis in your hands you won't understand how narrow it is. It is only 82mm wide, the TC6 is 96.
04-07-2012, 01:45 PM
#842
04-08-2012, 03:08 PM
#844
Why? Because of space restrictions. In order to make the chassis narrower, and use double bellcranks, the battery system must be done this way. There just is no space to use the TC6 system. Personally, I prefer this method thought. Our system will allow you to adjust the battery cradle to fit slightly wider or narrower batteries by sliding the battery braces in or out.
Until you don't hold our chassis in your hands you won't understand how narrow it is. It is only 82mm wide, the TC6 is 96.
Until you don't hold our chassis in your hands you won't understand how narrow it is. It is only 82mm wide, the TC6 is 96.
Just one more question about the battery position: The original chassis offered two positions forward or backward. How is the position on your chassis in comparison to that?
04-08-2012, 04:46 PM
#845
The battery is about 2mm further back than the furthest back position. It is similar to the 417, but not quite as far back. Basically, it is about as far forward as it can be with the dual bellcranks. The car has tons of steering and tons of traction.
04-09-2012, 02:26 AM
#846
Tech Rookie
How much will the new chassi cost ?
04-09-2012, 02:35 AM
#847
Tech Addict
Hey Cristian, it will include the double bellcrank?
04-09-2012, 10:35 AM
#849
Tech Apprentice
i don't see where i can place a pre order for the chassis on your site .....
04-09-2012, 11:22 AM
#852
man i hope you have enough for me to order a set on tuesday. Have to wait till my payday
04-09-2012, 11:27 AM
#853
Tech Regular
Yeah I think I might add the chassis on my next order too. And some other stuff too, good work Cristian 
04-10-2012, 08:15 AM
#854
I just placed my order for the DCJ's this morning. Did you guys already run out????
04-10-2012, 08:20 AM
#855
Thanks!
No, we still have plenty in stock. We got a lot of them made
We should have pre-orders for the chassis hopefully by tonight. We will be giving a free spring set to everyone who pre-orders one. Turns out, the factory is telling me they will be done in about 15 days. That should make them ready to ship from our store in approximately 3 weeks!!!
No, we still have plenty in stock. We got a lot of them made
We should have pre-orders for the chassis hopefully by tonight. We will be giving a free spring set to everyone who pre-orders one. Turns out, the factory is telling me they will be done in about 15 days. That should make them ready to ship from our store in approximately 3 weeks!!!
