Barracuda from Alex racing
#4501
R/C Tech Elite Member
iTrader: (47)
Re: R2 sale
Originally posted by JDM_DOHC_SiR
OK guys here is the last one I have up for sale..
http://www.rctech.net/forum/showthre...127#post507127
-Dave
OK guys here is the last one I have up for sale..
http://www.rctech.net/forum/showthre...127#post507127
-Dave
#4502
R/C Tech Elite Member
iTrader: (47)
Originally posted by Herminator
Hehe, does Dave have anything else than tricked out cuda's?
I bet whenever he buys a new one the shop says and what options would you be wanting with that?
Hehe, does Dave have anything else than tricked out cuda's?
I bet whenever he buys a new one the shop says and what options would you be wanting with that?
#4505
Tech Champion
iTrader: (9)
Originally posted by Randman
Actually I saw a Pro 3 that Dave was selling a while back, nothing short of the nicest Pro 3 I've ever seen... just like the cudas he builds
Actually I saw a Pro 3 that Dave was selling a while back, nothing short of the nicest Pro 3 I've ever seen... just like the cudas he builds
Dave had one of the nicest Pro3 I've seen as well... and so did I... and KO, and Maj. Teeth.
#4506
Regional Moderator
Originally posted by rc-zombies
Pro3... did someone say pro3
Dave had one of the nicest Pro3 I've seen as well... and so did I... and KO, and Maj. Teeth.
Pro3... did someone say pro3
Dave had one of the nicest Pro3 I've seen as well... and so did I... and KO, and Maj. Teeth.
#4511
Regional Moderator
Originally posted by JDM_DOHC_SiR
the Pro 4 is looking good...but I might want a thicker chassis..
the Pro 4 is looking good...but I might want a thicker chassis..
#4512
Hmm, Pro 4, no thanks, not after my previous HPI experiences with parts prices and avialability on occasion...
OK, I have a question for you guys, I already know the answer, it's a problem I just came across with my car but know how to fix it.
I went to clean my comm by pushing the car along whilst holding a comm stick in the motor and find the car won't move
I turn both front wheels together and there is no problem that end so I do the same to the rear, no problem. The motor will turn fine too. Put it on the ground again and it still won't move when I push it whats up if the drive train is free?
OK, I have a question for you guys, I already know the answer, it's a problem I just came across with my car but know how to fix it.
I went to clean my comm by pushing the car along whilst holding a comm stick in the motor and find the car won't move
I turn both front wheels together and there is no problem that end so I do the same to the rear, no problem. The motor will turn fine too. Put it on the ground again and it still won't move when I push it whats up if the drive train is free?
#4513
Tech Champion
iTrader: (31)
Originally posted by Herminator
Hmm, Pro 4, no thanks, not after my previous HPI experiences with parts prices and avialability on occasion...
OK, I have a question for you guys, I already know the answer, it's a problem I just came across with my car but know how to fix it.
I went to clean my comm by pushing the car along whilst holding a comm stick in the motor and find the car won't move
I turn both front wheels together and there is no problem that end so I do the same to the rear, no problem. The motor will turn fine too. Put it on the ground again and it still won't move when I push it whats up if the drive train is free?
Hmm, Pro 4, no thanks, not after my previous HPI experiences with parts prices and avialability on occasion...
OK, I have a question for you guys, I already know the answer, it's a problem I just came across with my car but know how to fix it.
I went to clean my comm by pushing the car along whilst holding a comm stick in the motor and find the car won't move
I turn both front wheels together and there is no problem that end so I do the same to the rear, no problem. The motor will turn fine too. Put it on the ground again and it still won't move when I push it whats up if the drive train is free?
1st big No NO...always do motor maint. when the motor is out of the car..!!! and as far as your drive train not moving..???you have me not to clear on what your saying...but if it`s free when the motor is out then it`s more than likely the magnets or there`s some crud in your motor that needs to be cleaned out...thats all that I can think of
-Dave
#4514
hehe, maybe read what I said more closely front wheels move fine together and rear wheels move fine together....
silly me installed the rear difff the wrong way round when I was reshimming it this morning wheels didn't like going in opposite directions when pushed along the ground had me scratching my head for a few minutes, then it changed to hitting my head
I guess I should pay more attention when putting it together again next time
motor was cleaned out of the car but I had a little look at it and thought the comm could be more shiney nothing wrong with a little rub with a comm stick, letting the wheels do the work, of course I don't have the motor wired up at the time.
silly me installed the rear difff the wrong way round when I was reshimming it this morning wheels didn't like going in opposite directions when pushed along the ground had me scratching my head for a few minutes, then it changed to hitting my head
I guess I should pay more attention when putting it together again next time
motor was cleaned out of the car but I had a little look at it and thought the comm could be more shiney nothing wrong with a little rub with a comm stick, letting the wheels do the work, of course I don't have the motor wired up at the time.
#4515
Tech Champion
iTrader: (31)
Originally posted by Herminator
hehe, maybe read what I said more closely front wheels move fine together and rear wheels move fine together....
silly me installed the rear difff the wrong way round when I was reshimming it this morning wheels didn't like going in opposite directions when pushed along the ground had me scratching my head for a few minutes, then it changed to hitting my head
I guess I should pay more attention when putting it together again next time
motor was cleaned out of the car but I had a little look at it and thought the comm could be more shiney nothing wrong with a little rub with a comm stick, letting the wheels do the work, of course I don't have the motor wired up at the time.
hehe, maybe read what I said more closely front wheels move fine together and rear wheels move fine together....
silly me installed the rear difff the wrong way round when I was reshimming it this morning wheels didn't like going in opposite directions when pushed along the ground had me scratching my head for a few minutes, then it changed to hitting my head
I guess I should pay more attention when putting it together again next time
motor was cleaned out of the car but I had a little look at it and thought the comm could be more shiney nothing wrong with a little rub with a comm stick, letting the wheels do the work, of course I don't have the motor wired up at the time.
-Dave