Barracuda from Alex racing
#3226
Regional Moderator
Originally posted by JDM_DOHC_SiR
ahh Color change ..hehehehe
What color?
-Dave
ahh Color change ..hehehehe
What color?
-Dave
#3227
Tech Champion
iTrader: (31)
Originally posted by Ko Racer
no color change I did one of your mods to it just a bit of shaving to it
no color change I did one of your mods to it just a bit of shaving to it
-Dave
#3228
Regional Moderator
Originally posted by JDM_DOHC_SiR
I see you did the lower motor mount ..heheh but I was just a cheap bastard and bought the PAL set up...for too much money .. can you say 140$ for the lower mounts Oh well who every get`s this car is going to love it...it has Squat Dry bearings and Ceramic diff balls ect ect..
-Dave
I see you did the lower motor mount ..heheh but I was just a cheap bastard and bought the PAL set up...for too much money .. can you say 140$ for the lower mounts Oh well who every get`s this car is going to love it...it has Squat Dry bearings and Ceramic diff balls ect ect..
-Dave
i have one set on my pal car and use to run them in all my mini z's
Last edited by Ko Racer; 07-28-2003 at 10:22 AM.
#3229
our SMTCA.org website has just been updated with loads of pics.
here's a nice one of my car in action one of the few times it was handling ok that day must have been the last qualifier where I hauled myself into the A final.
here's a nice one of my car in action one of the few times it was handling ok that day must have been the last qualifier where I hauled myself into the A final.
#3230
Here's a pic of me checking how badly I'd done, I hope the photo has been stratched a little
#3231
Regional Moderator
nice pic's herminator
#3233
R/C Tech Elite Member
iTrader: (47)
Originally posted by JDM_DOHC_SiR
OK here is my Latest Body for next weeks Big Race...
I have decided to use the Cheveon Models EB110LMS .... it`s a very High speed body..
Have a look
-Dave
OK here is my Latest Body for next weeks Big Race...
I have decided to use the Cheveon Models EB110LMS .... it`s a very High speed body..
Have a look
-Dave
#3235
R/C Tech Elite Member
iTrader: (47)
Originally posted by JDM_DOHC_SiR
Naww... I just don`t drive it as much as the Cuda`s.... and I have to add like almost 100grams to race with it ..! It`s that Dang Light
I`m selling it for cheap too...about >>>.00$
Naww... I just don`t drive it as much as the Cuda`s.... and I have to add like almost 100grams to race with it ..! It`s that Dang Light
I`m selling it for cheap too...about >>>.00$
#3236
Thanks guys.
Up very early aren't you Dave? I'm up very late though aswell I suppose, 2.15am well I did sleep half the day
Looks like the new venue for Sunday's race is slightly rough tarmac, and has a split drain accross it which if it's like I think it will cause some ride height issues for those on the 5mm limit or with low shells Aparently it will be dusty too since they haven't even raced on it before suppose it can't be any worse than our Ayr venue turned out to be, used to be ok but so many trucks have left terrible dents and lots of brake dust.
Ahwell should be interesting.....
Up very early aren't you Dave? I'm up very late though aswell I suppose, 2.15am well I did sleep half the day
Looks like the new venue for Sunday's race is slightly rough tarmac, and has a split drain accross it which if it's like I think it will cause some ride height issues for those on the 5mm limit or with low shells Aparently it will be dusty too since they haven't even raced on it before suppose it can't be any worse than our Ayr venue turned out to be, used to be ok but so many trucks have left terrible dents and lots of brake dust.
Ahwell should be interesting.....
#3238
Originally posted by Randman
Cant have worse traction than a wood floor though...
Cant have worse traction than a wood floor though...
get some old tyres and put thumb tacs through them wouldn't like to be the marshal that pics a car up with it's wheels spinning though OUCH!
the problem I have is if it's too low grip, since I have no option about running a front one way diff, I need to order another normal diff unit and use what parts I can from my knackered one as spares for the future going to have to get the back end nailed to the track without making the car understeer too much, although a little understeer is a lot easier than oversteer, but it's not as fast...