Team Associated TC4
#136
Uh... I stumbled onto it while researching other things haha.. I dunno if it's suppose to be there or not.. so I'll PM ya...
#138
Haha, now you will get a hundred PMs Kilruf.
#139
Tech Fanatic
bring the car to tfb race barry tc4
Originally posted by Barry Baker
On the Shaft issue.....
The TC4 hs a new shaft and input cup, WAY WAY more strong and the shaft stays much straighter for longer....in fact havent seen one bend yet...
but if you do have the tobee or IRS they will still work but you have to use the old input cups....
Hope that answered you question,
Barry
On the Shaft issue.....
The TC4 hs a new shaft and input cup, WAY WAY more strong and the shaft stays much straighter for longer....in fact havent seen one bend yet...
but if you do have the tobee or IRS they will still work but you have to use the old input cups....
Hope that answered you question,
Barry
#140
Randy,
Did you get a chance to drive it at all? If so, impressions?
Did you get a chance to drive it at all? If so, impressions?
#142
Tech Addict
iTrader: (7)
check the competitionx site under the manual section, the tc4 one is there as a .pdf file.
http://ebiz.netopia.com/competitionx/formsmanuals/
http://ebiz.netopia.com/competitionx/formsmanuals/
#143
Tech Regular
If you guys go to competitionx.com and check out the manual, it shows how the input bearing deal has been changed. Also shows how the complicated shimming of the toe, kickup, anti dive, and pro dive is done. Hopefully it wont be too bad.
Chris
Chris
#144
R/C Tech Elite Member
iTrader: (40)
Originally posted by mtc3od
If you guys go to competitionx.com and check out the manual, it shows how the input bearing deal has been changed. Also shows how the complicated shimming of the toe, kickup, anti dive, and pro dive is done. Hopefully it wont be too bad.
Chris
If you guys go to competitionx.com and check out the manual, it shows how the input bearing deal has been changed. Also shows how the complicated shimming of the toe, kickup, anti dive, and pro dive is done. Hopefully it wont be too bad.
Chris
I think the new spur mount was based off an aluminum one trinity had. I have one on my TC3, which allows me to use three screws for the spur, and not just two. Glad to see that they took note of it.
Overall, i'm impressed with changes that AE has made, they've improved on everything i disliked about the TC3....
#145
Tech Master
iTrader: (15)
Re: bring the car to tfb race barry tc4
Originally posted by tc3 racer sc
hi barry ru going to bring the car to fernando so we can get a look at it please do thxs reggie
hi barry ru going to bring the car to fernando so we can get a look at it please do thxs reggie
#146
Car looks good guys...
Going to make me buy a TC again...
Going to make me buy a TC again...
#147
Tech Apprentice
I saw Barry run it at So-cal saturday too. He didnt run it very much though. I couldnt decide from that if he liked the set up or not because he wasnt driving like i normally see him drive. I didnt ask him though.
#148
Tech Elite
iTrader: (27)
Impressions
Hi! I had a chance to see this car first hand. Tony P. of associated was kind enough to let me hold it and inspect this awesome car. My impressions was they basically made the TC3 even better and kept what the tc3 was all about. I am a big Tamiya fan and kudos to the the TB EVO 4 but TC3 is still the car to beat and I am glad associated did not go to far off from the original. They did what it needed to have and it will be the car that every manufacturer have to go by again.
#149
Tech Fanatic
Re: Re: bring the car to tfb race barry tc4
Originally posted by J.Filipow
Reggie- Barry ran it a little bit today in practice at So Cal...I am sure he will be bringing it to TFB. I would be there, too, if I could. Good luck!
Reggie- Barry ran it a little bit today in practice at So Cal...I am sure he will be bringing it to TFB. I would be there, too, if I could. Good luck!