BMI 1/12 conversion/car
#230
Tech Champion
iTrader: (5)
John-you should plan on racing the Halloween Classic. Our track is also a ultra-unbelievably competitive 12th scale track/club. Wayne and Paul Ciccarello are stupid fast-then theres a ton more guys just nipping at there heals-well trying to anyways. If you come up after the Classic-there will probably be 4 or 5 BMI 12th scale cars running as well.
#232
I made damper tubes for my L3 - Carbon tubes with Titanium shaft. It cost me about $18 for materials but I did about 4 hours work. The tubes were carbon arrow shafts. I reamed it out to 9/64" ( I think) 3.57mm and I used 3.5mm dia 115mm long e-max turnbuckles. I cut them in half and had to cylindrically grind them a little. Works very well, the cylindrical grinding put an interesting surface finish on the shaft which makes them really hold onto the damper fluid, I did not even have to groove the shafts.
#233
Tech Elite
iTrader: (2)
Originally posted by rayhuang
John-you should plan on racing the Halloween Classic. Our track is also a ultra-unbelievably competitive 12th scale track/club. Wayne and Paul Ciccarello are stupid fast-then theres a ton more guys just nipping at there heals-well trying to anyways. If you come up after the Classic-there will probably be 4 or 5 BMI 12th scale cars running as well.
John-you should plan on racing the Halloween Classic. Our track is also a ultra-unbelievably competitive 12th scale track/club. Wayne and Paul Ciccarello are stupid fast-then theres a ton more guys just nipping at there heals-well trying to anyways. If you come up after the Classic-there will probably be 4 or 5 BMI 12th scale cars running as well.
Your track does always look unbelieveable. I wish I could attend.
Wayne - Thanks for the part #'s, I'll look them up on CRC's site.
John
#235
Just give them a ring and you can pre-order either the conversion kit or the complete 1/12th kit.
#239
Tech Master
iTrader: (14)
Wayne:
Hi,
Thanks for getting Jason (my son aka Mini) all excited about your 1/12th scale. (ray has a part in this too) so far everyday he calls me to see if I have called Jay or Ray to see whats going on. he's been lurking here as he calls me at work to tell me who posted what.
so far this is the most he has been excited about any indoor racing. (we race Karts during the summer and race r/c during the winter) since he started Karting he has lost most of his interest in R/C. even tho he can run with Chuck L most weekends.
we look forward to running theB.M.I. 1/12th scale soon. and hopfully at Cleveland. I will introduce Mini to you there.
Ray any more thoughts on the TC3 (sorrry wayne for stealing your thread for a couple of minutes). call me on my cell around noon...I should be up then.
Thanks
Hi,
Thanks for getting Jason (my son aka Mini) all excited about your 1/12th scale. (ray has a part in this too) so far everyday he calls me to see if I have called Jay or Ray to see whats going on. he's been lurking here as he calls me at work to tell me who posted what.
so far this is the most he has been excited about any indoor racing. (we race Karts during the summer and race r/c during the winter) since he started Karting he has lost most of his interest in R/C. even tho he can run with Chuck L most weekends.
we look forward to running theB.M.I. 1/12th scale soon. and hopfully at Cleveland. I will introduce Mini to you there.
Ray any more thoughts on the TC3 (sorrry wayne for stealing your thread for a couple of minutes). call me on my cell around noon...I should be up then.
Thanks
#240
Ray... Thanks, The car was fast and smooth, POWER PUSH batteries and TEAM SCREAM motors were working!!!
Racenut123... I ran the BMI car in stock over the weekend... there were many non-t-bar cars there and some t-bar cars. I've tried the non-t-bar car and couldn't drive it.
Timxlb... see you guys at Cleveland
Wayne
Racenut123... I ran the BMI car in stock over the weekend... there were many non-t-bar cars there and some t-bar cars. I've tried the non-t-bar car and couldn't drive it.
Timxlb... see you guys at Cleveland
Wayne