Johanson132

Hello guys,
im building my MRX5 right now and im asking me if
my servos are ok

the servo is super fast but only has 50 Ncm.
Ive got 2 of them from electric onroad.
can i use them on throttle or steering or better go for 100Ncm Servos?

Greetings

Johan

DJ_Shakespear

The want the power for the servos to be at least in the 100 oz/in or 7.2 kg/cm @6V and to have speed of less than 0.15 sec in 60 degrees.
There are sooo many servo's you can good from, but I would definitely stick to metal geared servos, and try to get them in digital mode as well (much smoother)