ioxqq

I am thinking to get one. Is it necessary? Do you use 1/8 Buggy car stand?

ghost68

I would get one... They definitely make wrenching on your kit a little easier...

dragracechief

iTrader: (1)

Dont laugh but I use a 4x4 screwed to a 2x6 base, simple and basically free and it works. Seen some other home built designs too, a little inginuity goes a long way.

portyansky

iTrader: (54)

I use my starter box.

drewmugx5t

iTrader: (21)

I mostly use my starter box too. I have one stationary stand and two spinning stands and i find myself using the starter box or the stationary stand most of the time.

sexyrexy

iTrader: (21)

I have a stand to but use a monster truck tire instead

bboard

iTrader: (1)

I have a spinning stand, but only use it wrenching away from the track and its more conveinent. Use starter box at the track.

bacchus

iTrader: (8)

+1

steve307b

iTrader: (23)

I use one of those white plastic first aid boxes from home depot. The car or truck spins on it for wrenching and you have your first aid supplys at the track. Works great

delane74

iTrader: (38)

+1 have way too many laying around.

MazDAMN

iTrader: (1)

i use a bucket. its the same diameter as a 1 gallon fuel bottle, lol

infact, i upgraded to this bucket FROM a 1 gallon fuel bottle that i just cut the top off of and put bracing on the inside, lmao.

(so im cheap)

AZRC4Me

iTrader: (8)

I was using that Ofna spinning plastic stand, getting ready for my heat, threw the glow plug ignitor on after preheating, pressed down, and was confused why my buggy wouldn't start...oh, duh, cause it's not a starter box

tgrand

+1 on the Ofna car stand....

Joey Powell

iTrader: (7)

http://www.nitrohouse.com/Accessorie...duct_info.html

T. Herwig

iTrader: (25)

I use the Duratrax spinning stand to work on my 8th scale vehicles and it works good.