danjoy25

iTrader: (38)

Checked their site but says that they don't do international order.

TeamButter

iTrader: (3)

Model Chicks......R/C cars, Model Chicks......R/C cars, Model Chicks......R/C cars.....ummmm ok..Let you slide on that one!!

Have fun bro!!

vi3tishduy

So when is the RDX coming out? Worth getting of JRXS?

pipih2000

I got mine yesterday and is fantastic, except it's missing the bearing cariers for the diffs, front and rear.I was planing on racing the car next weekend,but i gess i'll have to wait

koabich

The RDX is already out. Corally called me last week saying they had the car to fill my backorder. But it took too long for them to get it out and I fell in love with the 415.

rcgen

Are you guys having to prep the chassis? For example sanding/glueing the edges. I saw a couple of the RDXs at the Super Regional race in Florida. I didn't notice if that was done.

pipih2000

Well i did mine for the looks and the nice finish, not that the car needs the extra look. It's so beautifuly finished and crafted!!! Know i shall wait for the parts missing in my kit and then hit the track
Thumbs-up for the Corally RDX

barnacle

iTrader: (9)

Yeah definately do the usual prep to the chassis. I used a wet 600 grit to take off the edges and then used some CA. Also file down the battery slots they are a bit sharp (just a little otherwise your cells will drag).

barnacle

iTrader: (9)

Also a little heads up for those building an RDX, skip to the end and assemble the sway bar mounts on the arms at the beginning of the assembly process.

Take note of the sway bars cause they look the same but are actually different lengths!

speedxl

barnie youre highly technical!

barnacle

iTrader: (9)

I finally got to run my RDX and was pretty impressed with how smooth and quiet this car is. In about 6 batteries I was able to get the same lap times as my Xray that I have had 6 months to tune on the layout with.

KoE

iTrader: (6)

would be great ehh if they could but much earlier they told me that they are bound not to sell outside north america. try asking ray huang if he has extra

u also need to find some buddies to help ya with the parts too! those are my obstacles but there are lots of good ppl on rctech that will help ya out

AdamD

iTrader: (6)

Hey Mike, You were able to match your xray lap times after just 6 packs. Thats awesome! Car must be great right out of the box. Goodluck with your new car.

AdamD

barnacle

iTrader: (9)

Yeah it was pretty good right outta the box.

I think once I get some time on it and get a "setup" I should be a few tenths faster.

kartermdb

iTrader: (15)

ive had my RDX for a few weeks and i cant wait to race it tomorrow night

my assassin has been beat to death and now i have fresh stuff to run, im excited