Stick Clod Buster Crawler - Super Crawler RTR!!
#1
Stick Clod Buster Crawler - Super Crawler RTR!!
Here's my homemade stick crawler with Clod axles, it's based off of TCS original Stick chassis with a homemade backbone out of solid 1/2 aluminum bar and stock stock mounts out of 6061T aluminum 1/4 plate. Axle links out of 3/16 threaded rod with aluminum tube covers and traxxas rod ends. Shocks are HPI MT. Everything else including chassis hardware was ordered from TCS store. This rig has never seen the rocks! only my grass back yard and the living room furniture. Everything works great and just needs tweaked for an awesome super rig. Have what you can't buy new any more...a Clod Stick! Here's the specs: everything except the DX6 and wheels and tires were purchased new!
-Clod axles new with hot glue locked diffs with stainless steel screw kit
-CC Sidewinder micro ESC's - bought new with boxes
-low bucks racing 55T motors - 3 runs on them
-CC BEC's x 2
- 2 x Blue Lipo 3S 1800mah 25C batteries - 3 charges (currently ran in parrallel)
- 6 x GP 3300 mah Nimh divided on front hubs - (Powering the Servo BECs)
- Front servo Hitec HS-7980TH ($175) with 610 oz/in @7.4v
- rear servo Hitec HS-7954SH
- AR6000 spektrum reciever
- DX6 radio with smooth throttle with neutral return spring installed (with original box and 4 - micro servos, charger, manual!)
- Cen GST 7.7" wheels with 23mm adapters
- spare set of Proline beadlock Cheyenne narrow beadlocks with moab XL tires and custom wheel weight system included (see pics) - with hub covers and extra screws
extras: Hitech HPP-21 servo programmer
- HS805BB 1/4 scale servo
- Clod adjustable motor mounts
-original boxes for servos and esc's
- 6 x GP 3300 Nimh batteries
I'm asking $375 shipped to your door via fedex ground to the lower 48 US. Paypal preferred!! No TRADES!!!! PM with questions!
Selling to fund my brushless Muggy conversion.
(ebay id: bud_45lcacp)
h**p://i44.photobucket.com/albums/f13/magicald_223/Stick%20Crawler/IMG_6483.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/2.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/Stick%20Crawler/IMG_6482.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/Stick%20Crawler/IMG_6484.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/Stick%20Crawler/IMG_6490.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/Stick%20Crawler/IMG_6489.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/Stick%20Crawler/IMG_6486.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/Stick%20Crawler/IMG_6485.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/Stick%20Crawler/IMG_6492.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/8.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/Stick%20Crawler/IMG_6495.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/Stick%20Crawler/IMG_6494.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/Stick%20Crawler/IMG_6489.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/Stick%20Crawler/IMG_6496.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/Stick%20Crawler/IMG_6497.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/Stick%20Crawler/IMG_6498.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/Stick%20Crawler/IMG_6499.jpg
-Clod axles new with hot glue locked diffs with stainless steel screw kit
-CC Sidewinder micro ESC's - bought new with boxes
-low bucks racing 55T motors - 3 runs on them
-CC BEC's x 2
- 2 x Blue Lipo 3S 1800mah 25C batteries - 3 charges (currently ran in parrallel)
- 6 x GP 3300 mah Nimh divided on front hubs - (Powering the Servo BECs)
- Front servo Hitec HS-7980TH ($175) with 610 oz/in @7.4v
- rear servo Hitec HS-7954SH
- AR6000 spektrum reciever
- DX6 radio with smooth throttle with neutral return spring installed (with original box and 4 - micro servos, charger, manual!)
- Cen GST 7.7" wheels with 23mm adapters
- spare set of Proline beadlock Cheyenne narrow beadlocks with moab XL tires and custom wheel weight system included (see pics) - with hub covers and extra screws
extras: Hitech HPP-21 servo programmer
- HS805BB 1/4 scale servo
- Clod adjustable motor mounts
-original boxes for servos and esc's
- 6 x GP 3300 Nimh batteries
I'm asking $375 shipped to your door via fedex ground to the lower 48 US. Paypal preferred!! No TRADES!!!! PM with questions!
Selling to fund my brushless Muggy conversion.
(ebay id: bud_45lcacp)
h**p://i44.photobucket.com/albums/f13/magicald_223/Stick%20Crawler/IMG_6483.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/2.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/Stick%20Crawler/IMG_6482.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/Stick%20Crawler/IMG_6484.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/Stick%20Crawler/IMG_6490.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/Stick%20Crawler/IMG_6489.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/Stick%20Crawler/IMG_6486.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/Stick%20Crawler/IMG_6485.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/Stick%20Crawler/IMG_6492.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/8.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/Stick%20Crawler/IMG_6495.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/Stick%20Crawler/IMG_6494.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/Stick%20Crawler/IMG_6489.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/Stick%20Crawler/IMG_6496.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/Stick%20Crawler/IMG_6497.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/Stick%20Crawler/IMG_6498.jpg
h**p://i44.photobucket.com/albums/f13/magicald_223/Stick%20Crawler/IMG_6499.jpg