Fusion Batteries
#1801
Fusion is not closing up. some changes are taking place though requiring production to be off line temporarily.
#1802
Tech Initiate
WHEW!!!
Thank you John, for clearing the air.
Can you share any info as far as what we can expect? Or when?
Can you share any info as far as what we can expect? Or when?
#1803
Tech Prophet
iTrader: (34)
The EP cells are not the only cells to have the self disharge problems. They IB cells do this same thing. Not all EP cells are bad on this as well. I have done some long term self dicharge testing on these tihngs and the problem is not as bad as it sound! Long term storage. (2 weeks or more) required a decent charge on the cells. Some self discharge harder then other but we are not talking about dead cells in a couple days here!
As long as the cells are not stored with no charge (ie taking them down to .9V) and then stored for days then this is really not a problem. For stock racing I just run the pack for 6-7 min runs and then store it. For mod if you are getting any where close to dumping the pack put some more charge back in them. Since you are just adding in a partial charge you should not need to equalize the pack prior to charging it back up. Just extra time and cycles IMO. And for what it is worth I have seen and played with few of these batteries myself!
As long as the cells are not stored with no charge (ie taking them down to .9V) and then stored for days then this is really not a problem. For stock racing I just run the pack for 6-7 min runs and then store it. For mod if you are getting any where close to dumping the pack put some more charge back in them. Since you are just adding in a partial charge you should not need to equalize the pack prior to charging it back up. Just extra time and cycles IMO. And for what it is worth I have seen and played with few of these batteries myself!
#1805
Anybody knows if ic an use this batts http://cgi.ebay.com/ws/eBayISAPI.dll...0331&rd=1&rd=1
in the kyosho motorcycle 1/8 HOR
thanks
in the kyosho motorcycle 1/8 HOR
thanks
#1806
Tech Elite
iTrader: (11)
Originally Posted by fenix
Anybody knows if ic an use this batts http://cgi.ebay.com/ws/eBayISAPI.dll...0331&rd=1&rd=1
in the kyosho motorcycle 1/8 HOR
thanks
in the kyosho motorcycle 1/8 HOR
thanks
#1807
I have a pack in for replacement 1-bad cell, I guess it was a donation for Fusion.
If you guys are in a reorg It would be nice to put a little more info out.
If you guys are in a reorg It would be nice to put a little more info out.
#1808
I inquired a week and half ago on the site.
I have to agree that by the looks of the website, and the fact that I didn't hear back from them on when stuff would be available, that they are done.
You would think that somethng on the site would say they are coming back soon if they in fact planned on coming back.
I have to agree that by the looks of the website, and the fact that I didn't hear back from them on when stuff would be available, that they are done.
You would think that somethng on the site would say they are coming back soon if they in fact planned on coming back.
#1809
Tech Adept
fusion la pack
One of three packs run time fell way off.One cell is down to 350 sec. @35 amps only used 5 times. maintained like recamended.Mark O Brein how long have you been waiting for the pack you sent back?I I guess I'll just wait with mine.Mark please post if you here from fusion.Greatly appreciate it Lance
#1810
The folks at the shop are away from it until at least monday. They are on business. Sit tight and I am sure they will take care of you.
#1811
John even the email address Fusion used for sales/billing has been turned off ?!?
Again if they are truly going to take care of us cool, but this method is very bad for business.
Again if they are truly going to take care of us cool, but this method is very bad for business.
#1812
Originally Posted by lance
One of three packs run time fell way off.One cell is down to 350 sec. @35 amps only used 5 times. maintained like recamended.Mark O Brein how long have you been waiting for the pack you sent back?I I guess I'll just wait with mine.Mark please post if you here from fusion.Greatly appreciate it Lance
#1813
Tech Initiate
Last edited by Faster1; 02-23-2007 at 08:04 PM.
#1814
Dont get carried away with the speculation. Like John said, they are out of town right now. Be patient. They have always been on time outherwise. Relax.
#1815
Fusion has been acquired by ProMatch Racing!!!
Ok guys I know everyone is not exactly happy right now but I have good news....
Effective today Fusion Batteries has been acquired by Pro Match Racing. You can find all the details at www.promatchracing.com More information is forthcoming and warranty issues will be worked out as well. If you have any questions you can send them to [email protected] or you can call 1-928-855-2226 during normal business hours. (Please do not send PM's to me regarding questions,pricing,availibilty of cells, or warranty questions) All issues will be handled through the website or via phone. We look forward to serving your racing needs and hope you will be patient during the transition. Keep your eyes on the ProMatch website for details as things unfold.
www.promatchracing.com
Effective today Fusion Batteries has been acquired by Pro Match Racing. You can find all the details at www.promatchracing.com More information is forthcoming and warranty issues will be worked out as well. If you have any questions you can send them to [email protected] or you can call 1-928-855-2226 during normal business hours. (Please do not send PM's to me regarding questions,pricing,availibilty of cells, or warranty questions) All issues will be handled through the website or via phone. We look forward to serving your racing needs and hope you will be patient during the transition. Keep your eyes on the ProMatch website for details as things unfold.
www.promatchracing.com