Tamiya TRF417
#361
Tech Regular
Hey Cool
What are the bonus parts?
Do all kits come with them or are you just lucky to get the boxes that have them?
Wanted a 417 but could not wait so went with the TCX....still keeping a close eye on this thread though......
What are the bonus parts?
Do all kits come with them or are you just lucky to get the boxes that have them?
Wanted a 417 but could not wait so went with the TCX....still keeping a close eye on this thread though......
#363
#365
#366
Tech Regular
iTrader: (4)
So I ran the car in spec 17.5 this weekend(no boost) and it felt really good. It was a tenth or so faster than the X but like I thought you can run more consistant fast laps. The car feels the same lap after lap not changing much if at all during the run where as my X would take a few laps to come in every run and if I pushed too hard I would overheat the tires in the last 30 sec's or so of a run. Warmed tires, not warmed it didn't seem to make a difference other than the first 2-3 laps to gain heat in the tire without warmers.
I think it has to do with the motor mount more than anything else. The flex near the back of the chassis just feels more even and its a little stiffer.
All in all a great test day where I didn't have to change much from the stock set-up. The only real changes I made were to remove to shims from under the front blocks tighten the rear sway bar slightly and went down .5mm on the front inner link.
Me likey
I think it has to do with the motor mount more than anything else. The flex near the back of the chassis just feels more even and its a little stiffer.
All in all a great test day where I didn't have to change much from the stock set-up. The only real changes I made were to remove to shims from under the front blocks tighten the rear sway bar slightly and went down .5mm on the front inner link.
Me likey
#367
Tech Regular
Have a Tamiya 416X for sale, if interested send a PM
with Tamiya Org. Lipo Chassis
with Tamiya Org. Lipo Chassis
#368
feel harder than STD , near HPI .
Second lot TRF417 tomorrow arrive !
#369
Tech Rookie
Hi, all.
I put on some pix as I am assembling my new TRF417.
If anyone is interested, do feel free to visit my blog:
Aurora RC blog
here are a few:
Enjoy!
I put on some pix as I am assembling my new TRF417.
If anyone is interested, do feel free to visit my blog:
Aurora RC blog
here are a few:
Enjoy!
Last edited by Aurora; 12-20-2010 at 07:26 PM.