Mugen MRX4 W/Kyosho ?
03-02-2010, 01:53 PM
#1
Mugen MRX4 W/Kyosho ?
I was wondering if the Kyosho Evolva Pulleys are the same as the Mugen MRX pulleys, ie will the Kyosho pulleys work on a Mugen.
They look the same and alot of parts on ebay will say mrx4, evolva.
Just kinda wondered.
They look the same and alot of parts on ebay will say mrx4, evolva.
Just kinda wondered.
03-02-2010, 02:34 PM
#3
Team Titan Pulley
03-02-2010, 02:48 PM
#4
MUGEN/KYOSHO PULLEYS
TEAMTITAN SELLS MAKES THEM
RCMUSHROOM ON EBAY SELLS THEM ALSO HERE THEY ARE
Item number: 170430083610
Item number: 400071323049
Item number: 170419204193
Item number: 400091344119
THESE ARE ALL THEY HAVE THEY DO NOT HAVE THE FRONT PULLEY AND THE REAR ONE. GOOD LUCK. 
RCMUSHROOM ON EBAY SELLS THEM ALSO HERE THEY ARE
Item number: 170430083610
Item number: 400071323049
Item number: 170419204193
Item number: 400091344119
THESE ARE ALL THEY HAVE THEY DO NOT HAVE THE FRONT PULLEY AND THE REAR ONE. GOOD LUCK.
03-02-2010, 03:57 PM
#5
This is what they look like on the MRX4X
03-02-2010, 04:07 PM
#7
03-02-2010, 04:10 PM
#8
Pulleys
The 16 tooth is what I was looking for and the Zeppin racing list this part for MRX4, Evolva 05,M3.
It is this kind of listing that makes me wonder about the Kyosho pulleys.
Not to mention the fact they are $6 a set versus Mugen at $22.
However I was wanting to run the aluminum pulleys but my usual supplier is out of stock in the 16.
The Zeppinn pulley on Ebay is about the same price as the Titan so maybe I will get one of those.
Would still be interested in the Kyosho fit I think I will find someone with a Kyosho at the nest race and check it out.
\
----->
It is this kind of listing that makes me wonder about the Kyosho pulleys.
Not to mention the fact they are $6 a set versus Mugen at $22.
However I was wanting to run the aluminum pulleys but my usual supplier is out of stock in the 16.
The Zeppinn pulley on Ebay is about the same price as the Titan so maybe I will get one of those.
Would still be interested in the Kyosho fit I think I will find someone with a Kyosho at the nest race and check it out.
\
----->
03-02-2010, 04:16 PM
#10
The 16 tooth is what I was looking for and the Zeppin racing list this part for MRX4, Evolva 05,M3.
It is this kind of listing that makes me wonder about the Kyosho pulleys.
Not to mention the fact they are $6 a set versus Mugen at $22.
However I was wanting to run the aluminum pulleys but my usual supplier is out of stock in the 16.
The Zeppinn pulley on Ebay is about the same price as the Titan so maybe I will get one of those.
Would still be interested in the Kyosho fit I think I will find someone with a Kyosho at the nest race and check it out.
\
----->
It is this kind of listing that makes me wonder about the Kyosho pulleys.
Not to mention the fact they are $6 a set versus Mugen at $22.
However I was wanting to run the aluminum pulleys but my usual supplier is out of stock in the 16.
The Zeppinn pulley on Ebay is about the same price as the Titan so maybe I will get one of those.
Would still be interested in the Kyosho fit I think I will find someone with a Kyosho at the nest race and check it out.
\
----->
03-02-2010, 04:17 PM
#11
03-02-2010, 04:19 PM
#13
I only put them on because where I run the pulleys save my belts.
03-02-2010, 04:24 PM
#14
Pulleys
I just received some stuff from them actually emailed Doug at serpent and there was not one in the box.
I just emailed him asking about stock so I should know tomorrow.
The Zeppin one is in Hong Kong dought I would get that by next weekend.
\
----->
I just emailed him asking about stock so I should know tomorrow.
The Zeppin one is in Hong Kong dought I would get that by next weekend.
\
----->
03-02-2010, 05:08 PM
#15
Tech Master
iTrader: (1)
I have run the belts and pulleys for two state races and the WINTERNATS
no wear at all changed belts for the 45 min "a" main but keep the belts i took off still good
Last edited by jrice; 03-02-2010 at 05:35 PM.