Team ORCA USA Discussion Thread
#196
Hi,
My son, Andrew Hardman, TQ'd and won the 13.5 TC Super Stock class at the US Indoor Champs race held over this past weekend. We were using the recently approved V3 software in the ESC.
In the Mod class, Andrew was 3rd on the grid and finished 3rd in the race behind Paul Lemieux and Keven Hebert.
Thanks ORCA for the great ESCs, motors and batteries.
Regards,
Ian
My son, Andrew Hardman, TQ'd and won the 13.5 TC Super Stock class at the US Indoor Champs race held over this past weekend. We were using the recently approved V3 software in the ESC.
In the Mod class, Andrew was 3rd on the grid and finished 3rd in the race behind Paul Lemieux and Keven Hebert.
Thanks ORCA for the great ESCs, motors and batteries.
Regards,
Ian
#197
Hi,
My son, Andrew Hardman, TQ'd and won the 13.5 TC Super Stock class at the US Indoor Champs race held over this past weekend. We were using the recently approved V3 software in the ESC.
In the Mod class, Andrew was 3rd on the grid and finished 3rd in the race behind Paul Lemieux and Keven Hebert.
Thanks ORCA for the great ESCs, motors and batteries.
Regards,
Ian
My son, Andrew Hardman, TQ'd and won the 13.5 TC Super Stock class at the US Indoor Champs race held over this past weekend. We were using the recently approved V3 software in the ESC.
In the Mod class, Andrew was 3rd on the grid and finished 3rd in the race behind Paul Lemieux and Keven Hebert.
Thanks ORCA for the great ESCs, motors and batteries.
Regards,
Ian
I ran the 1s speedo this past weekend, it feels rather nice, and no rx pack needed
#198
#199
Tech Apprentice
Thanks Mark.
We are testing now - and will be out for Snowbirds in 1/12 Mod. Andrew loves it - just didn't have enough testing time yet.
We are hoping to do an ETS race too. Let us know which one you are planning to go to.
Regards,
Ian
We are testing now - and will be out for Snowbirds in 1/12 Mod. Andrew loves it - just didn't have enough testing time yet.
We are hoping to do an ETS race too. Let us know which one you are planning to go to.
Regards,
Ian
#200
Will let you know surely after holidays. Keep up the good work.
#202
Looking at one of the last three. There are about 6 racers that are interested in making the trip. Might be quite the event!
17th – 19th May 2013 Apeldoorn, Netherlands 14th – 16th June 2013 Traiskirchen, Austria 19th – 21st July 2013
Trencin, Slovakia
17th – 19th May 2013 Apeldoorn, Netherlands 14th – 16th June 2013 Traiskirchen, Austria 19th – 21st July 2013
Trencin, Slovakia
#203
R/C Tech Elite Member
iTrader: (28)
Looking at one of the last three. There are about 6 racers that are interested in making the trip. Might be quite the event!
17th – 19th May 2013 Apeldoorn, Netherlands 14th – 16th June 2013 Traiskirchen, Austria 19th – 21st July 2013
Trencin, Slovakia
17th – 19th May 2013 Apeldoorn, Netherlands 14th – 16th June 2013 Traiskirchen, Austria 19th – 21st July 2013
Trencin, Slovakia
When u say nats.. U mean the carpet nats, right? I wonder where that might be...
#204
Team EAM
iTrader: (79)
Looking at one of the last three. There are about 6 racers that are interested in making the trip. Might be quite the event!
17th – 19th May 2013 Apeldoorn, Netherlands 14th – 16th June 2013 Traiskirchen, Austria 19th – 21st July 2013
Trencin, Slovakia
17th – 19th May 2013 Apeldoorn, Netherlands 14th – 16th June 2013 Traiskirchen, Austria 19th – 21st July 2013
Trencin, Slovakia
Hi,
My son, Andrew Hardman, TQ'd and won the 13.5 TC Super Stock class at the US Indoor Champs race held over this past weekend. We were using the recently approved V3 software in the ESC.
In the Mod class, Andrew was 3rd on the grid and finished 3rd in the race behind Paul Lemieux and Keven Hebert.
Thanks ORCA for the great ESCs, motors and batteries.
Regards,
Ian
My son, Andrew Hardman, TQ'd and won the 13.5 TC Super Stock class at the US Indoor Champs race held over this past weekend. We were using the recently approved V3 software in the ESC.
In the Mod class, Andrew was 3rd on the grid and finished 3rd in the race behind Paul Lemieux and Keven Hebert.
Thanks ORCA for the great ESCs, motors and batteries.
Regards,
Ian
I do plan on getting the orca motors as soon as they become ROAR legal and I can get them in.
EA
#205
This past weekend the Orca super smooth ESC and also Keith Yu's advice and help were instrumental in allowing me to win the stock TC class in a highly attended 3 day onroad carpet race in Victoria BC Canada 230 total entries ( 36 in stock TC ) , the IROCC Speed Weekend.
I also used a team EA battery which I was very happy with.
Jake D.
I also used a team EA battery which I was very happy with.
Jake D.
Last edited by Magnet Top; 01-07-2013 at 08:41 PM.
#206
Team EAM
iTrader: (79)
This past weekend the Orca super smooth ESC and also Keith Yu's advice and help were instrumental in allowing me to win the stock TC class in a highly attended 3 day onroad carpet race in Victoria BC Canada 230 total entries ( 36 in stock TC ) , the IROCC Speed Weekend.
I also used a team EA battery which I was very happy with.
Jake D.
I also used a team EA battery which I was very happy with.
Jake D.
On another note all ORCA speedo's and programmers are now coming with the new 3.0 software on them. Anyone with an older one that wants it updated can send them to me and I'll update them for you. Just pay the shipping here and back.
Thanks
EA
#208
Tech Elite
iTrader: (51)
Join Date: Feb 2002
Location: Comin at ya from a distant galaxy
Posts: 2,930
Trader Rating: 51 (100%+)
Anyone try VX1 in 1/12th 13.5 blinky thinking about getting one.
#210
Tech Elite
iTrader: (51)
Join Date: Feb 2002
Location: Comin at ya from a distant galaxy
Posts: 2,930
Trader Rating: 51 (100%+)