Schumacher Corner
Tech Elite
iTrader: (9)
]
I liked the Kissmmee setup better than the Daytona setup you sent. At SS Speedway I could roll on the power through the sweeper on to the straight without full steering lock and I could lift to 1/2 throttle and stay on it through the sweeper after the straight. This was with a 5.5 on LiPo!
One change though...I used the new Schuey 1* alloy hubs and set the over all rear toe to ~2.75*...it was dialed!
I have never had that much steering in a Mod sedan
Hey are you going to need the Mohawk body for Minnreg?
I liked the Kissmmee setup better than the Daytona setup you sent. At SS Speedway I could roll on the power through the sweeper on to the straight without full steering lock and I could lift to 1/2 throttle and stay on it through the sweeper after the straight. This was with a 5.5 on LiPo!
One change though...I used the new Schuey 1* alloy hubs and set the over all rear toe to ~2.75*...it was dialed!
I have never had that much steering in a Mod sedan
Hey are you going to need the Mohawk body for Minnreg?
The Mohawk & 12th body is for the Birds. I will also need a couple for rubber tire racing as you can see
I will make sure to get you the parts we discussed asap!
Tech Initiate
iTrader: (3)
Shawn P UGPM
Tech Initiate
iTrader: (3)
Had fun racing at Mikes yesterday would like to thank Andrew and the other Shuie guys everybody was very helpful I need more pratice on the rug
Tech Regular
iTrader: (7)
L8r MARKER
Tech Elite
iTrader: (74)
Hey Rick whats up?Man you need to come over soon traction is awesome,good turn outs also hope you get to go the nats,i will get you hooked up on the rug
Super Moderator
iTrader: (239)
The Daytona setup was for a low-bite, tight layout; SS sounds like it's the complete opposite The alloy rear hubs is probably giving you that extra little on-power steering
The Mohawk & 12th body is for the Birds. I will also need a couple for rubber tire racing as you can see
I will make sure to get you the parts we discussed asap!
The Mohawk & 12th body is for the Birds. I will also need a couple for rubber tire racing as you can see
I will make sure to get you the parts we discussed asap!
Tech Master
iTrader: (39)
Ok..... I am running stock Rubber tire at the birds. Does anyone have a good setup? I have one I like and is close but I could use a little more.
Tech Champion
iTrader: (4)
Tech Master
iTrader: (5)
Join Date: Jul 2002
Location: A step closer to where I need to be a step further from where I was
Posts: 1,186
Trader Rating: 5 (100%+)
Super Moderator
iTrader: (239)
Tech Champion
iTrader: (42)
So now as far as the US goes who are the main guys? Chris Goetz on foams and Randy on rubber tires? I realize the FT and/or close to it type drivers will be hard to come by since Schumacher USA cut it's funding.
Tech Champion
iTrader: (15)
PW is a class act, and will be missed on the Schuie team. He always gave me time and insight when I was running the purplonium car.
Whomever Paul runs for will be lucky to have him represent.
Whomever Paul runs for will be lucky to have him represent.
It was time for a change (my decision) and I enjoyed my time with Schumacher.
Maybe I will team up with Marcos and try every car on the market
Team privateer
R/C Tech Elite Member
iTrader: (37)
I've had minimal interaction with PW but he will be missed dearly, he was a HUGE asset to all of us associated with Schumacher Inc and I hope this new friendship will continue in the future cause I need a brain to pick at the track