Schumacher Corner
What are your experiences of Kick-Up, Anti-Squat and Anti-Dive etc on carpet with rubbers and how it affects the handling?
Skiddins
Skiddins
Originally Posted by Marcos.J
Paul Wynn TQ and finished 2nd (because of me ) Paul easily had the win but due to a dumb mistake on my part I cost him the win!! Paul Im sorry and next time Ill keep my eyes a little more open and Ill try to move a little quicker!! Is just that your new car was moving SOOO fast! but again sorry for the mistake!
Super Moderator
iTrader: (239)
Originally Posted by P-DUB
Thanks Marcos...Stuff happens and it's all good. Heck, if it wasn't for you I wouldn't of been racing; thanks again for the crazy HP My car was SOOOO FAST on the straight
Tech Lord
iTrader: (13)
HACK!!!!!!!!!!! you know you wanna say it!!!
just messing marcos
just messing marcos
Super Moderator
iTrader: (239)
Originally Posted by protc3
HACK!!!!!!!!!!! you know you wanna say it!!!
just messing marcos
just messing marcos
hey guys, anyone have any gearing suggestions for a 19t motor? specifically with a KD? its a medium size carpet track with foam tire, im kinda new to the 1/10 TC scene and im the only one with a Mi2 at the track so taking gearing suggestions from all the T2 owners only gets me so far..currently im at 33/116 and the car feels flat, im using 4200 WC cells and they have good numbers, motors are always taken care of also, diffs feel fine..just wanna see what others are using....thanks
reigle,
bob has offered his mission so i have somethin to race. i have no knowledge base of schumacher cars later than the original cat bug. what should i know goin in, and beyond where to get parts....are there any parts that work from the new car in case of failure? gonna be really flyin blind on this but any heads up would be appreciated b4 i go out and test all day saturday.
thx
-ult
bob has offered his mission so i have somethin to race. i have no knowledge base of schumacher cars later than the original cat bug. what should i know goin in, and beyond where to get parts....are there any parts that work from the new car in case of failure? gonna be really flyin blind on this but any heads up would be appreciated b4 i go out and test all day saturday.
thx
-ult
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
Originally Posted by ultegrasti
reigle,
bob has offered his mission so i have somethin to race. i have no knowledge base of schumacher cars later than the original cat bug. what should i know goin in, and beyond where to get parts....are there any parts that work from the new car in case of failure? gonna be really flyin blind on this but any heads up would be appreciated b4 i go out and test all day saturday.
thx
-ult
bob has offered his mission so i have somethin to race. i have no knowledge base of schumacher cars later than the original cat bug. what should i know goin in, and beyond where to get parts....are there any parts that work from the new car in case of failure? gonna be really flyin blind on this but any heads up would be appreciated b4 i go out and test all day saturday.
thx
-ult
To get the most info call Schumacher. Adrian and Paul are excellent on info like that. I can help you set up the car. I never had a Mission. My last Schumacher car was the Axis I and II and now my MI2 EC.
Tech Champion
iTrader: (4)
We have everything for the Mission. The suspension parts, upper and lower arms, hubs, etc... are still in use on the Fusion.
Tech Champion
iTrader: (17)
Originally Posted by acsubie
hey guys, anyone have any gearing suggestions for a 19t motor? specifically with a KD? its a medium size carpet track with foam tire, im kinda new to the 1/10 TC scene and im the only one with a Mi2 at the track so taking gearing suggestions from all the T2 owners only gets me so far..currently im at 33/116 and the car feels flat, im using 4200 WC cells and they have good numbers, motors are always taken care of also, diffs feel fine..just wanna see what others are using....thanks
I think you can start from 34T and up............
I just ran my stock foam with 13.5 with 34/116.......car was flat, and can't keep up with the tunned stock brush motor, and someone mentioned 34 is like 6-8 T too low for the 13.5 brushless
R/C Tech Elite Member
iTrader: (23)
Originally Posted by Solara
I just ran my stock foam with 13.5 with 34/116.......car was flat, and can't keep up with the tunned stock brush motor, and someone mentioned 34 is like 6-8 T too low for the 13.5 brushless
By the way - my son Scott just finished 7th in the Australian Nationals on the weekend driving a rubber EC with Novak Brushless 3.5..... proud Dad
Tech Champion
iTrader: (22)
Originally Posted by Solara
I think you are still undergear a little...I know 19T has a lot more torque then stock motor, and I ran 31-33T on stock motor foam (56-57mm foams)
I think you can start from 34T and up............
I just ran my stock foam with 13.5 with 34/116.......car was flat, and can't keep up with the tunned stock brush motor, and someone mentioned 34 is like 6-8 T too low for the 13.5 brushless
I think you can start from 34T and up............
I just ran my stock foam with 13.5 with 34/116.......car was flat, and can't keep up with the tunned stock brush motor, and someone mentioned 34 is like 6-8 T too low for the 13.5 brushless
Not to contradict or anything but we routinely gear our CO27's higher than our KD's. im assuming you had a 116 spur on the car with 57mm tires and geared that stock motor at 33. That puts you mid 27mm rollout. we were running 30-34 rollout. The old Blue can Atlas 19T you could run 35-37 rollout as long as you had a fan on it. with this years batteries compared to last years I would think you need to drop 1-2 teeth to not fade. Just my .02
Tech Elite
iTrader: (30)
Originally Posted by P-DUB
Thanks Marcos...Stuff happens and it's all good. Heck, if it wasn't for you I wouldn't of been racing; thanks again for the crazy HP My car was SOOOO FAST on the straight
Tech Champion
iTrader: (17)
Originally Posted by Solara
I just ran my stock foam with 13.5 with 34/116.......car was flat, and can't keep up with the tunned stock brush motor, and someone mentioned 34 is like 6-8 T too low for the 13.5 brushless
Originally Posted by Bob Barry
Not to contradict or anything but we routinely gear our CO27's higher than our KD's. im assuming you had a 116 spur on the car with 57mm tires and geared that stock motor at 33. That puts you mid 27mm rollout. we were running 30-34 rollout. The old Blue can Atlas 19T you could run 35-37 rollout as long as you had a fan on it. with this years batteries compared to last years I would think you need to drop 1-2 teeth to not fade. Just my .02
hey bob, when you coming to the belly again, your initial setup help with the Mi2 was a great starting point, just need to get it geared right now