The Original SC10 Chassis Plate to prevent or repair damaged chassis
12-21-2009, 01:04 PM
#1
The Original SC10 Chassis Brace to prevent or repair damaged chassis
IF YOU CHOOSE THE ORIGINAL 'F 'N 'CUDA BRACE YOU WILL BE GETTING THE BRACE THAT FIRST REPAIRED AND ELIMINATED THE SC10's CHASSIS WEAKNESS. PERIOD!
THANKS TO THOSE OF YOU WHO HAVE ALREADY SHOWN THEIR SUPPORT AND TO THOSE WHO WILL CHOOSE THIS CHASSIS BRACE TO RELY ON FOR LASTING DURABILITY.
This is the Original Handmade 'F 'N 'CUDA SC10 Chassis Brace that has been going on these trucks since the first trucks were released.
More than 200 of these braces have already been sold and shipped worldwide from here, on ebay, on other rc forums or at a track near you!
See my feedback, they love it!
This is the simplest and lightest brace available. Weighs only 11 to 12 grams! This truck does NOT need the extra front weight when set up correctly!
Look around and see whose brace is on the trucks at your track!
I broke my chassis the first day I raced it, when this happened it broke the top kit brace too.
When my chassis broke, all I had to do was replace the original top brace which also gets broken, then bolt the 'F 'N 'CUDA Brace onto the broken chassis and I was back on the track in minutes. I still haven't spent all the time to replace the broken chassis, I have been racing my truck with the broken chassis since the SC10 was first released! Proven durability over many, many months!
No complete rebuild of the truck to replace the chassis, just bolt it to the original holes on the bulkhead/bumper then easily drill 2 new holes into the chassis and use the supplied hardware to bolt it on.
Use it to prevent or repair a broken chassis, it's that simple! You can make your own but why bother? I would have bought one if they were available so I could get right back to racing but they were not available.
You can also bolt it on under the front plastic skid plate if you like, that is how we recommend to run them now.
Picture shows the brace on top of the plastic skid plate.
Screws and locknuts included for rear holes!
$16.00 total will get one to you anywhere in the U.S. Immediately!
Add $5.00 to get one shipped worldwide.
THANKS TO THOSE OF YOU WHO HAVE ALREADY SHOWN THEIR SUPPORT AND TO THOSE WHO WILL CHOOSE THIS CHASSIS BRACE TO RELY ON FOR LASTING DURABILITY.
This is the Original Handmade 'F 'N 'CUDA SC10 Chassis Brace that has been going on these trucks since the first trucks were released.
More than 200 of these braces have already been sold and shipped worldwide from here, on ebay, on other rc forums or at a track near you!
See my feedback, they love it!
This is the simplest and lightest brace available. Weighs only 11 to 12 grams! This truck does NOT need the extra front weight when set up correctly!
Look around and see whose brace is on the trucks at your track!
I broke my chassis the first day I raced it, when this happened it broke the top kit brace too.
When my chassis broke, all I had to do was replace the original top brace which also gets broken, then bolt the 'F 'N 'CUDA Brace onto the broken chassis and I was back on the track in minutes. I still haven't spent all the time to replace the broken chassis, I have been racing my truck with the broken chassis since the SC10 was first released! Proven durability over many, many months!
No complete rebuild of the truck to replace the chassis, just bolt it to the original holes on the bulkhead/bumper then easily drill 2 new holes into the chassis and use the supplied hardware to bolt it on.
Use it to prevent or repair a broken chassis, it's that simple! You can make your own but why bother? I would have bought one if they were available so I could get right back to racing but they were not available.
You can also bolt it on under the front plastic skid plate if you like, that is how we recommend to run them now.
Picture shows the brace on top of the plastic skid plate.
Screws and locknuts included for rear holes!
$16.00 total will get one to you anywhere in the U.S. Immediately!
Add $5.00 to get one shipped worldwide.
Last edited by F N CUDA; 10-21-2010 at 01:02 AM.
02-08-2010, 11:24 AM
#3
Still goin strong, thanks!
Get em from here, RC Tech, at OCRC Raceway, West Coast RC Raceway or even ebay.
I'm still seeing these trucks get broken and we're still fixin em and puttin em back on the track within minutes.
Better to have it and not need it than to need it and not have it.
PM me or call one of the tracks, I'm at one or the other very often.
If they don't have one I'll get them one or you can reach me directly by PM.
Don't let your race nite end due to a broken chassis, fix it or prevent it all together.
Get em from here, RC Tech, at OCRC Raceway, West Coast RC Raceway or even ebay.
I'm still seeing these trucks get broken and we're still fixin em and puttin em back on the track within minutes.
Better to have it and not need it than to need it and not have it.
PM me or call one of the tracks, I'm at one or the other very often.
If they don't have one I'll get them one or you can reach me directly by PM.
Don't let your race nite end due to a broken chassis, fix it or prevent it all together.
10-21-2010, 12:42 AM
#8
I bought one from you today at OCRC, back on the track in 10 minutes! I came up short on the triple one too many times....
Thanks again!
Thanks again!
10-21-2010, 12:56 AM
#9
That's great, I'm glad I could help and glad you got back on the track, sucks bein broken.
Nice meeting you today!
Thanks for the postitive feedback here too.
I'm keeping them moving on ebay and by pm here too for those that may need one.
Nice meeting you today!
Thanks for the postitive feedback here too.
I'm keeping them moving on ebay and by pm here too for those that may need one.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
