Castle Creations Mamba Max Pro Sensored ESC
#1261
Could someone explain to me how to know where to set the RPM range in cheat mode. I have an Associated SC10 with a Novak 13.5t motor. Running a 75 spur and a 14 pinion for a FDR of 8.125. I run on small and large tracks. Maybe I need two settings depending on the track.
#1262
Tech Adept
No i dont think so i have the same.
The MMP is great for offroad with the Torque limiter, had a good play around with it yesterday with a Hacker 10.5 in a Duratrax Buggy and wound down was still poping the front wheels half way down the straight.
Knocked the TL back to 3
start power to med
punch to 50%
timing 35 deg
rpm range 4000-7500
spur 87 pinion 19
Thanks Steven
The MMP is great for offroad with the Torque limiter, had a good play around with it yesterday with a Hacker 10.5 in a Duratrax Buggy and wound down was still poping the front wheels half way down the straight.
Knocked the TL back to 3
start power to med
punch to 50%
timing 35 deg
rpm range 4000-7500
spur 87 pinion 19
Thanks Steven
#1263
The RPM range will basically determine how the power comes on. For onroad with spec motors, we run a very wide range, as we can use the power everywhere. Running offroad, you may want to start later. For a 13.5 in onroad, I start run a range of around 6000-25000 (i dont remember what it gives you exactly, but its around this). You may want a range that starts later, so you dont get so much wheelspin down low.
1.29 does not show the kv. It doesnt really matter, as this "test" isnt really accurate, its just data for the torque control.
1.29 does not show the kv. It doesnt really matter, as this "test" isnt really accurate, its just data for the torque control.
#1264
Tech Adept
The RPM range will basically determine how the power comes on. For onroad with spec motors, we run a very wide range, as we can use the power everywhere. Running offroad, you may want to start later. For a 13.5 in onroad, I start run a range of around 6000-25000 (i dont remember what it gives you exactly, but its around this). You may want a range that starts later, so you dont get so much wheelspin down low.
1.29 does not show the kv. It doesnt really matter, as this "test" isnt really accurate, its just data for the torque control.
1.29 does not show the kv. It doesnt really matter, as this "test" isnt really accurate, its just data for the torque control.
#1265
Suspended
#1267
Sweet. I really like being able to see the differences between motors. And even if it is not super accurate I find it interesting to see how the controller reads different motors.
#1268
Tech Adept
Come on Castle....get us the Turbo function already
#1269
May I know what is the right gearing for Novak 550 Ballistic 4.5 & 7.5 on Slash 4 x 4 with 3s ? Do I need any timing adjustment please ?
#1270
#1271
For anyone in the market for the MMP, I just got a great deal from Tower Hobbies using the newest TH member codes along with free shipping. $107.98 shipped!
http://www.rctech.net/forum/7838081-post41.html
http://www.rctech.net/forum/7838081-post41.html
#1273
#1275
Just ordered my MMP yesterday. Anyone know if the programing sofware is mac compatable? Im assuming its pc only.