wannabee

iTrader: (4)

Thanks Rob, I forgot that part too...Can you bring me a bumper so I can dup. it?

See ya,
Kevin

Neil Rabara

Hmmm, I'd like to try that bumper. How do I order one?

Accord

I would like to order one too, the only problem is I don't have Paypal.

RBLove

iTrader: (90)

Kevin,

We kind of have to come up with it on our own. Pulfer always made sweet one's. I'll see if he cannot bring one with him Sunday.

wannabee

iTrader: (4)

Thats cool Rob, I can hook you guys up with a slab too, so that way you can cut anything...

Orders: I accept paypal, MO drop me a line at [email protected], so I can get your shipping info and vice versa...

Thanks guys,
Kevin
RUBBERNECK~RACING

rayhuang

iTrader: (5)

I bought 5 of the umpers for me and the local racers and they are very nice!! I know they will save me a lot of bent C-hubs!!!

I will also buy a bunch of the TC3 ones as well. You can just send me 6 of them now if you want!!!

Pay Pal coming!!

Ray Huang

wannabee

iTrader: (4)

Thanks Ray for the words, I have plenty of them left...The TC3 ones are nice too...

Kevin
RUBBERNECK~RACING

rdub202

iTrader: (19)

hey guys if been considering a new Raycer but im not sure about it. from what i hear the other xrays realy should have all setup boards and crap like that-me being a newbie to racing and such i dont want to haver to deal with all that. im JW if the T1R is differnt and doesnt require that??

-rY

racenut123

iTrader: (32)

This a a "rubber" carpet setup that was absolutely Dialed.

Front
Tire Premounted cs27 with stock insert
Medium3 Degree front castor block with arms running flat for total of 3 castor.{Adujust according to how much steering you like}
Medium front arms.
Middle camber location on stock tower,
33lb xray spring{Purple}
30 weight shock oil with Adj pistons on 2 wholes open.
Shock mounting:Stock location suggested.
droop setting is 1

Rear
Cs22 with stock insert
Rear Soft arm
Rear arms run flat on bottom role center holes on the bulkheads.
Camber link mounted on Lower inner roll center bridge hole.And inner on the rear hub carrier.
Shock oil 30 wt,Blue xray spring with 2 holes open on the pistons.
Shock mounting stock suggesated mounting holes on arm and tower.
Droop setting is 3

Also running the 1.77 pullies and a Monster geared 128/29 or 30.
7.5-7.8 final.Stock upper deck also.

Ran sorex tires in first qualifiers and switched to Cs 27's and 22's to give them a try.Car was absolutely dialed.was 2 laps faster with Takeoff tires.Anyways,thought I would share my finding.I am the only t1r racer at my track and had tc3's shaking in thier boots last night.

dtm

The Xray is no different to any other car in that a setup board is always an advantage but not absolutely essential. If you run the C hub this is even more so.........

rdub202

iTrader: (19)

thx dtm

Headbanger

rdub202,

The setup station is one the most important among all my tools. It's very accurate and very easy to use. I have tried some of the cheaper alternatives like the RPM camber/toe-in gauges and didn't realize how inaccurate they were until I put my car on the setup station. Though they are somewhat expensive, having one is worth every penny as far as saving time and fustration in setting up your car.

volav

Just wanted to let everyone know the outdoor, rubber tire, setup worked great. I have never had a car do what this one did. I'm sold on the X-Ray, and the Losi and TC3 I had are now for sale. What a great car!!

Neil Rabara

Great job to all the factory and team Xray drivers who made the long trip to NC. Congratulations to Ralph Burch and Alex Lopez for taking 2nd and 2nd in Mod and Stock respectively at the ROAR nats.

pucho

Alex was telling me that In the second race he got taken out by an AE driver and the car got turend over and no one was there to marshal him so he desided to save his tires and pulled it. In the third round he passed MikeD on the forst turn but latter tapped the board allowing MikeD and ScottyE to pass. Then every time Alex went to pass Scotty he would block and tapp Alex as to ensure that AE would walk away with the championship. If it woldn't have been for them two incident's Alex would have won the championship, OH well!

Alex was very satisfuyed with his T1R, So was Ralph Ill try and get Alex's final set up posted latter when we have some more time to talk. I do Know he started with the set up I posted earlier (for Superior) And made a few changes.