XRAY T3
09-13-2010, 05:56 PM
#3062
Tech Initiate
Yeah not the best looking part but as long as it gets the job done then thats all that matters I suppose.SRC is a Italian company but I found them on DmModel.it which is a Italian rc shop website with paypal and overseas shipping.They are bloody expensive thought 32 euros for a pair.
09-13-2010, 07:57 PM
#3064
Tech Rookie
help !!!!
i just finished my first build. (loved it) now i need setup help. i run a tight course that has a lot of grip for asphalt. (it will rip apart 38 shore nitro shoes) foams 42 or 45 shore are the norm for the track or sweep 36 for rubber. but to the point what is a good starting point? it is open mod and my bigest problem is to much over steer on corner exit. or spinning out on intry under braking. i have even started to change tires 45 in front 42 in rear still have the problem. i have a tekin rs with novak 8.5 rs pro fdr of 6.2 droop is 5f 6r ride hight is 6f 5r kinda afraid to go lower the car is to pritty. thanks for any help
09-13-2010, 11:22 PM
#3065
Tech Rookie
i just finished my first build. (loved it) now i need setup help. i run a tight course that has a lot of grip for asphalt. (it will rip apart 38 shore nitro shoes) foams 42 or 45 shore are the norm for the track or sweep 36 for rubber. but to the point what is a good starting point? it is open mod and my bigest problem is to much over steer on corner exit. or spinning out on intry under braking. i have even started to change tires 45 in front 42 in rear still have the problem. i have a tekin rs with novak 8.5 rs pro fdr of 6.2 droop is 5f 6r ride hight is 6f 5r kinda afraid to go lower the car is to pritty. thanks for any help
What about springs ?
Something that works very often well is 2.8 front and 2.6 rear.
09-14-2010, 05:49 AM
#3066
i just finished my first build. (loved it) now i need setup help. i run a tight course that has a lot of grip for asphalt. (it will rip apart 38 shore nitro shoes) foams 42 or 45 shore are the norm for the track or sweep 36 for rubber. but to the point what is a good starting point? it is open mod and my bigest problem is to much over steer on corner exit. or spinning out on intry under braking. i have even started to change tires 45 in front 42 in rear still have the problem. i have a tekin rs with novak 8.5 rs pro fdr of 6.2 droop is 5f 6r ride hight is 6f 5r kinda afraid to go lower the car is to pritty. thanks for any help
Stiffer rear springs.
Stand rear shocks more upright.
Less front droop.
Skiddins
09-14-2010, 09:23 AM
#3067
So where can we buy those upper bulkheads? The orange ones look better but either ones
Last edited by BlackedOutREVO; 09-14-2010 at 10:05 PM.
09-14-2010, 09:32 AM
#3068
Double post
Last edited by BlackedOutREVO; 09-14-2010 at 10:05 PM.
09-17-2010, 12:03 AM
#3071
cool
Hope there is an update pack
Hope there is an update pack
Last edited by xray09ACT; 09-17-2010 at 12:14 AM.
09-17-2010, 01:57 PM
#3072
Tech Adept
CVDs question
Are Xray CVDs cros compatibile from T3-T2-T1?
Thanks
Thanks
09-17-2010, 05:16 PM
#3073
