Warren Weaver

iTrader: (49)

This past saturday I started at a fdr 3.3 at Jackson with 60 on the timing never came off higher then 140 I tried to raise timing and drop to a 3.5 but lost my infield speed have to test more at the region 2 this saturday I will try less timing see how it goes

Cpt.America

iTrader: (52)

I don't get it.. that's geared taller than 21.5 guys. I was geared at 3.67 today, and the motor was coming off the track screaming hot. I don't think I can even gear that tall without changing to a different spur..hhmm..

Warren Weaver

iTrader: (49)

This is where I'm starting this week on rpm version 3.5fdr with ht rotor and 55degrees timing 3.2 for the ht ht at the same timing,jon williams will post soon his temps where low also

Jon Williams

iTrader: (5)

With the HT stator/rotor combo I was geared at 53/94. Motor was coming off at 140deg.

With the RPM stator/rotor combo geared at 49/94 and was nearly the same.

Preferred the RPM honestly. Had a very nice, smooth powerband.

Jerz616

iTrader: (49)

That's in a T4?

Jon Williams

iTrader: (5)

Yup:

HT: 94/53 * 1.9 internal ratio = ~ 3.37
RPM: 94/49 * 1.9 internal ratio = ~ 3.65

idbdoug

iTrader: (41)

IONv4 17.5 back on ROAR's approval list July 1, 2013. Hope Jeff has allot in stock
idbdoug

Matt Trimmings

iTrader: (170)

So I heard that Fantom does a military discount...how do you go about setting this up if so. I have an account on their site and emailed them my info from my military email address a couple weeks ago but haven't heard anything...and they don't seem to pick up their phone when calling. Thanks!

IIGQ4U

iTrader: (53)

If you leave a voice message, they will call you back.

Autocratic

iTrader: (26)

Jeff is a busy guy, and he handles the emails and phones, solely. He'll get back to you. Call back when you get a chance, and leave a voicemail.

Matt Trimmings

iTrader: (170)

Got it, thanks guys!

Cpt.America

iTrader: (52)

Well, you are certainly right. I geared my torque/torque apex2 all the way up to a 3.4 today, and the motor really came alive. I think I can go up a tiny bit more to 3.3 or 3.35... I can't believe how tall you gear this stator/rotor combo!

Motor was really fast.

Warren Weaver

iTrader: (49)

Good to hear brandon happy its working for you

RAL

iTrader: (67)

Warren which timing mark is 60deg?

Cpt.America

iTrader: (52)

On the apex2, they are directly marked... so 60 is marked with a "60". 55 is the tick to the left of that (unmarked), and then to the left of that is marked "50". Most guys are running 55 to 60.