TC3 Forum
its dropped so TTT it goes
(shoves thread back up to first page)
Last edited by trx1; 07-11-2005 at 12:22 PM.
Tech Master
iTrader: (26)
I've had my mostly stock TC3 Racer for almost three years and I've noticed a good bit of chatter in the CVD's especially when the wheels are turned. I've cleaned and relubed all four of them but the chattering continues. I can see play in the axle when the car is upside down and under power so I'm assuming the CVD's are worn. MIP sells a rebuild kit that might solve my problem but I'm suspicious of the bones themselves because of the visual play between it and the cross pin.
Any suggestions on the best route to take? Anyone experience this wear?
Thanks
Any suggestions on the best route to take? Anyone experience this wear?
Thanks
Well, ive got my 2 tc3's EXACTLY THE SAME!
list:
2 tc3 racers
2 maxx amp 2400 batts
2 spec motors
servos,esc,and receivers are the same
wheels/tires are the same
both have inboard antennas
both run hpi saleen stang bodies
Its the better driver who will win these races!!
list:
2 tc3 racers
2 maxx amp 2400 batts
2 spec motors
servos,esc,and receivers are the same
wheels/tires are the same
both have inboard antennas
both run hpi saleen stang bodies
Its the better driver who will win these races!!
Last edited by trx1; 07-15-2005 at 09:52 AM.
com on now, someone still run this car
or r they "last week's news"
or r they "last week's news"
I still have mine, but it will be replaced with a TA05. Sorry hehe.. the cars old, and I wanna experiance belt drive.
mail call.......
look what came in the mail for me today....
will these work on my tc3
will these work on my tc3
mate u need more blue
Tech Fanatic
iTrader: (19)
Originally Posted by trx1
look what came in the mail for me today....
will these work on my tc3
will these work on my tc3
Originally Posted by Dane
I've had my mostly stock TC3 Racer for almost three years and I've noticed a good bit of chatter in the CVD's especially when the wheels are turned. I've cleaned and relubed all four of them but the chattering continues. I can see play in the axle when the car is upside down and under power so I'm assuming the CVD's are worn. MIP sells a rebuild kit that might solve my problem but I'm suspicious of the bones themselves because of the visual play between it and the cross pin.
Any suggestions on the best route to take? Anyone experience this wear?
Thanks
Any suggestions on the best route to take? Anyone experience this wear?
Thanks
Hope this helps,
-T
paz, the only things im wanting in blue are:
screw set
bat hold down
dogbones
screw set
bat hold down
dogbones
Tech Fanatic
iTrader: (19)
What about blue RPM Ball Cup Rod Ends? Those are much better.
Got those on my t3...
Now heres the parts im finding that i want:
are these good for a starting point
Now heres the parts im finding that i want:
are these good for a starting point
Tech Addict
iTrader: (9)
what does aluminum battery hold down do?? i think it is just the same as plastic, am i wrong??
Adds weight to your car!